EN 1057:2006

Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications

This European Standard specifies the requirements, composition, properties, sampling, test methods and
conditions of delivery for seamless round copper tubes.
It is applicable to tubes having an outside diameter from 6 mm up to and including 267 mm for:
-   distributing networks for hot water and cold water;
-   hot water heating systems, including panel heating systems (under-floor, wall, overhead);
-   domestic gas and liquid fuel distribution;
-   waste water sanitation.
It is also applicable to seamless round copper tubes intended to be pre insulated before use for any of the above purposes.

Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer für Wasser- und Gasleitungen für Sanitärinstallationen und Heizungsanlagen

Diese Europäische Norm legt die Anforderungen, Probenentnahme, Prüfverfahren und Lieferbedingungen für
nahtlose Rundrohre aus Kupfer fest.
Sie gilt für Rohre mit einem Außendurchmesser von 6 mm bis 267 mm für:
- Kalt- und Warmwasser-Verteilungsnetze;
- Warmwasser-Heizungssysteme, einschließlich Fußboden-, Wand- oder Deckenheizungssysteme;
- Verteilung gasförmiger und flüssiger Hausbrennstoffe;
- Abwasserentsorgung.
Sie gilt auch für nahtlose Rundrohre aus Kupfer, die zum Vorummanteln vor dem Einsatz für alle oben-genannten
Zwecke bestimmt sind.

Cuivre et alliages de cuivre - Tubes ronds sans soudure en cuivre pour l'eau et le gaz dans les applications sanitaires et de chauffage

La présente Norme européenne établit les exigences, le mode d'échantillonnage, les méthodes d'essai et les conditions de livraison applicables aux tubes ronds sans soudure en cuivre.
Elle s'applique aux tubes de diamètre extérieur compris entre 6 mm et 267 mm inclus, destinés :
-   à la distribution d'eau chaude et d'eau froide ;
-   au chauffage à eau chaude, y compris les systèmes de panneaux chauffants (par le sol, par les murs ou par le plafond) ;
-   à la distribution de gaz domestique et de combustibles liquides ;
-   à l'évacuation des eaux usées.
Elle s'applique également aux tubes en cuivre ronds sans soudure en cuivre destinés à être gainés avant utilisation pour l'une des applications ci-dessus.

Baker in bakrove zlitine - Nevarjene (narejene iz celega) bakrene cevi z okroglim prerezom za vodo in plin, ki se uporabljajo za sanitarne in ogrevalne namene

General Information

• Status: Withdrawn
• Publication Date: 09-May-2006
• Withdrawal Date: 23-Feb-2010
• ICS: 23.040.15 - Non-ferrous metal pipes
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 3 - Copper tubes (installation and industrial)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Feb-2010
• Completion Date: 24-Feb-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/131 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on pipes, tanks and ancillaries, not in contact with water intended for human consumption
• Mandate: M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
• Ref Project: SIST EN 1057:2006 - Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications

Relations

• Replaces: EN 1057:1996 - Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
• Effective Date: 22-Dec-2008
• Merged Into: EN 1057:2006+A1:2010 - Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Nevarjene (narejene iz celega) bakrene cevi z okroglim prerezom za vodo in plin, ki se uporabljajo za sanitarne in ogrevalne nameneKupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer für Wasser- und Gasleitungen für Sanitärinstallationen und HeizungsanlagenCuivre et alliages de cuivre - Tubes ronds sans soudure en cuivre pour l'eau et le gaz dans les applications sanitaires et de chauffageCopper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications77.150.30Bakreni izdelkiCopper products23.040.15Cevi iz neželeznih kovinNon-ferrous metal pipesICS:Ta slovenski standard je istoveten z:EN 1057:2006SIST EN 1057:2006en01-julij-2006SIST EN 1057:2006SLOVENSKI
STANDARDSIST EN 1057:19981DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1057May 2006ICS 23.040.15Supersedes EN 1057:1996
English VersionCopper and copper alloys - Seamless, round copper tubes forwater and gas in sanitary and heating applicationsCuivre et alliages de cuivre - Tubes ronds sans soudure encuivre pour l'eau et le gaz dans les applications sanitaireset de chauffageKupfer und Kupferlegierungen - Nahtlose Rundrohre ausKupfer für Wasser- und Gasleitungen fürSanitärinstallationen und HeizungsanlagenThis European Standard was approved by CEN on 23 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1057:2006: ESIST EN 1057:2006

Standardized dimensions for reconsideration at a future revision.26 Annex B (normative)
Carbon film test.27 B.1 Preparation of the test piece.27 B.2 Procedure.27 B.3 Detection and assessment of films.27 Annex C (normative)
Freedom from defects tests.28 C.1 Eddy current test.28 C.2 Hydrostatic test.28 C.3 Pneumatic test.28 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive (CPD) 89/106/EEC.30 ZA.1 Scope and relevant characteristics.30 ZA.2 Procedure(s) for attestation of conformity of pipes.32 ZA.2.1 System(s) of attestation of conformity.32 ZA.2.2 EC Certificate and Declaration of conformity.33 ZA.3 CE marking and labelling.34 Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of the EU Pressure Equipment Directive (PED) 97/23/EC.36 Bibliography.37
Tables Table 1 — Mechanical properties.12 Table 2 — Minimal elongation values for R250 (half hard) material condition tubes.13 Table 3 — Standardized dimensions.
...