EN 2311:1987
(Main)Aerospace series - Bushes with self-lubricating liner - Technical specification
Aerospace series - Bushes with self-lubricating liner - Technical specification
This standard specifies the required characteristics, inspections and tests, qualification, acceptance and delivery conditions for bushes designed to be subjected under load, to slow sliding movements, rotations and small oscillations only.
This standard applies to bushes defined by EN 2285, EN 2286, EN 2287 and EN 2288 standards used between fixed and/or moving components of the aircraft structure such as control surfaces, flaps, doors, etc., and their control mechanisms. They are designed to be used in the temperature range of -55 to +150 °C.
Luft- und Raumfahrt - Buchsen mit selbstschmierender Beschichtung - Technische Lieferbedingungen
Série aérospatiale - Bagues avec garniture autolubrifiante - Spécification technique
Aerospace series - Bushes with self-lubricating liner - Technical specification
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2001
Aerospace series - Bushes with self-lubricating liner - Technical specification
Aerospace series - Bushes with self-lubricating liner - Technical specification
Luft- und Raumfahrt - Buchsen mit selbstschmierender Beschichtung - Technische
Lieferbedingungen
Série aérospatiale - Bagues avec garniture autolubrifiante - Spécification technique
Ta slovenski standard je istoveten z: EN 2311:1987
ICS:
49.030.99 Drugi vezni elementi Other fasteners
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 2311
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.