EN 13232-2:2003

Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design

This part of this European Standard covers the following subjects:
- geometric design principles for wheel guidance;
- definition of basic limits of supply;
- applied forces and their adequate support;
- tolerance levels.
These are illustrated herein by application to a turnout. The main switch and crossing components are represented in turnouts and the principles used in turnouts apply equally to more complex layouts.

Bahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 2: Anforderungen an den technischen Entwurf

Diese Europäische Norm umfasst folgende Bereiche:
¾ geometrische Konstruktionsgrundsätze für die Radführung;
¾ Festlegung des wesentlichen Lieferumfangs;
¾ auftretende Kräfte und ihr entsprechendes Abfangen;
¾ Toleranzmaßstäbe.
Diese werden anhand einer Weiche dargestellt. Die Grundsätze, die für Weichen angewandt werden, sind gleichermaßen auf umfangreichere Weichenanlagen anwendbar.

Applications ferroviaires - Voie - Appareil de voie - Partie 2: Exigences pour la conception géométrique

Cette partie de l'EN 13232 couvre les sujets suivants :
- principes de conception géométrique pour le guidage des roues ;
- définition des limites essentielles pour la fourniture ;
- forces appliquées et leur support adéquat ;
- niveaux des tolérances.
Ces sujets sont illustrés par des applications à un branchement. Les principaux composants des appareils de voie sont représentés dans des branchements. Les principes appliqués dans les branchements sont également applicables dans les assemblages plus complexes.

Železniške naprave - Zgornji ustroj – Kretnice in križišča - 2.del: Geometrijske zahteve pri projektiranju

General Information

• Status: Withdrawn
• Publication Date: 19-Aug-2003
• Withdrawal Date: 18-Oct-2011
• ICS: 45.080 - Rails and railway components
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 1/WG 18 - Switches and crossings - Performance and acceptance
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Oct-2011
• Completion Date: 19-Oct-2011
• Directive: 93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Ref Project: SIST EN 13232-2:2004 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design

Relations

• Merged Into: EN 13232-2:2003+A1:2011 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design
• Effective Date: 20-Aug-2011
• Amended By: EN 13232-2:2003/FprA1 - Railway applications - Track - Switches and crossings - Part 2: Requirements for geometric design
• Effective Date: 12-Jun-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 2: Anforderungen an den technischen EntwurfApplications ferroviaires - Voie - Appareil de voie - Partie 2: Exigences pour la conception géométriqueRailway applications - Track - Switches and crossings - Part 2: Requirements for geometric design93.100Gradnja železnicConstruction of railways45.080Rails and railway componentsICS:Ta slovenski standard je istoveten z:EN 13232-2:2003SIST EN 13232-2:2004en01-junij-2004SIST EN 13232-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13232-2August 2003ICS 45.080English versionRailway applications - Track - Switches and crossings - Part 2:Requirements for geometric designApplications ferroviaires - Voie - Appareil de voie - Partie 2:Exigences pour la conception géométriqueBahnanwendungen - Oberbau - Weichen und Kreuzungen -Teil 2: Anforderungen an den technischen EntwurfThis European Standard was approved by CEN on 7 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13232-2:2003 ESIST EN 13232-2:2004
...