EN 14037-1:2003
(Main)Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements
Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirements
Definition of technical specifications and requirements of prefabricated hot water radiant panels fed with water at temperatures below 120°C supplied by a remote heat source and definition of the additional common data that the manufacturer shall provide to the trade in order to ensure the correct application of the products. The document does not apply to independent heating appliances.
Deckenstrahlplatten für Wasser mit einer Temperatur unter 120 °C - Teil 1: Technische Spezifikationen und Anforderungen
Panneaux rayonnants de plafond alimentés en eau à une température inférieure à 120 °C - Partie 1: Spécifications et exigences techniques
La présente norme européenne définit les spécifications et exigences techniques relatives aux panneaux rayonnants de plafond à eau chaude, alimentés en eau à des températures inférieures à 120 °C par une source de chaleur extérieure.
La présente norme européenne ne s'applique pas aux équipements de chauffage indépendants.
La présente norme européenne définit également les données courantes supplémentaires que le fabricant doit inclure dans sa documentation commerciale afin d'assurer une utilisation correcte des produits.
Stropne sevalne plošče za vodo pri temperaturi pod 120 °C – 1. del: Tehnične specifikacije in zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 1: Technical specifications and requirementsPanneaux rayonnants de plafond alimentés en eau a une température inférieure a 120 °C - Partie 1: Spécifications et exigences techniquesDeckenstrahlplatten für Wasser mit einer Temperatur unter 120 °C - Teil 1: Technische Spezifikationen und AnforderungenTa slovenski standard je istoveten z:EN 14037-1:2003SIST EN 14037-1:2004en,fr,de91.140.1001.040.91ICS:SLOVENSKI
STANDARDSIST EN 14037-1:200401-januar-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14037-1April 2003ICS 01.040.91; 91.140.10English versionCeiling mounted radiant panels supplied with water attemperature below 120 °C - Part 1: Technical specifications andrequirementsPanneaux rayonnants de plafond alimentés en eau à unetempérature inférieure à 120 °C - Partie 1: Spécifications etexigences techniquesDeckenstrahlplatten für Wasser mit einer Temperatur unter120 °C - Teil 1: Technische Spezifikationen undAnforderungenThis European Standard was approved by CEN on 20 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14037-1:2003 E
EN 14037-1:2003 (E)2ContentsPageForeword.31Scope.42Normative references.43Terms and definitions.44Symbols and units.85Construction specifications.106Maintenance of conformity.127Catalogue data, marking and labelling.13Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EUConstruction Products Directive.15Bibliography.19
EN 14037-1:2003 (E)3ForewordThis document (EN 14037-1:2003) has been prepared by Technical Committee CEN /TC 130, "Space heatingappliances without integral heat sources", the secretariat of which is held by UNI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003 and conflicting national standards shall be withdrawn at the latest byJanuary 2005.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.This European Standard of ceiling mounted radiant panels consists of the following parts:¾ Part 1: Technical specifications and requirements,¾ Part 2: Test method
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.