Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)

This document specifies a method for determining the resistance of a coating to scratches introduced by a usually hand-held loaded stylus.
The test can be carried out using a point stylus (method A) or using a disc stylus (method B).
Both methods are generally applicable and can be used in the field as well as on curved surfaces. Method A can also be applied on small test specimens (minimum dimensions 30 mm × 50 mm).
The test can be carried out as a "pass/fail" test (test requirement I) or as a classification test (test requirement II).

Beschichtungsstoffe - Kratzprüfung mit einem Härteprüfstab (ISO 22557:2019)

Peintures et vernis - Essai de rayage manuel avec un stylo d’essai de dureté (ISO 22557:2019)

Le présent document spécifie une méthode pour déterminer la résistance d'un revêtement aux rayures provoquées par un stylet, généralement portatif, sur lequel une charge est appliquée.
L'essai peut être réalisé avec un stylet à pointe (méthode A) ou un stylet à disque (méthode B).
Les deux méthodes sont généralement applicables, et il est possible de les utiliser sur le terrain ainsi que sur des surfaces courbes. La méthode A peut également être utilisée sur de petites éprouvettes (dimensions minimales: 30 mm × 50 mm).
L'essai peut être mis en œuvre sous la forme d'un essai de conformité/non-conformité (exigence d'essai I) ou d'un essai de classification (exigence d'essai II).

Barve in laki - Preskus razenja z uporabo vzmetnega svinčnika (ISO 22557:2019)

General Information

Status
Published
Publication Date
08-Dec-2020
Withdrawal Date
29-Jun-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
09-Dec-2020
Due Date
01-Aug-2022
Completion Date
09-Dec-2020

Buy Standard

Standard
EN ISO 22557:2021
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22557:2021
01-marec-2021
Barve in laki - Preskus razenja z uporabo vzmetnega svinčnika (ISO 22557:2019)
Paints and varnishes - Scratch test using a spring-loaded pen (ISO 22557:2019)
Beschichtungsstoffe - Kratzprüfung mit einem Härteprüfstab (ISO 22557:2019)
Peintures et vernis - Essai de rayage manuel utilisant un barreau d'essai de dureté (ISO
22557:2019)
Ta slovenski standard je istoveten z: EN ISO 22557:2020
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 22557:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22557:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 22557:2021


EN ISO 22557
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2020
EUROPÄISCHE NORM
ICS 87.040
English Version

Paints and varnishes - Scratch test using a spring-loaded
pen (ISO 22557:2019)
Peintures et vernis - Essai de rayage manuel utilisant Beschichtungsstoffe - Kratzprüfung mit einem
un barreau d'essai de dureté (ISO 22557:2019) Härteprüfstab (ISO 22557:2019)
This European Standard was approved by CEN on 30 November 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22557:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22557:2021
EN ISO 22557:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22557:2021
EN ISO 22557:2020 (E)
European foreword
The text of ISO 22557:2019 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 22557:2020 by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2021, and conflicting national standards shall be
withdrawn at the latest by June 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22557:2019 has been approved by CEN as EN ISO 22557:2020 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 22557:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 22557:2021
INTERNATIONAL ISO
STANDARD 22557
First edition
2019-07
Paints and varnishes — Scratch test
using a spring-loaded pen
Peintures et vernis — Essai de rayage manuel utilisant un barreau
d'essai de dureté
Reference number
ISO 22557:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 22557:2021
ISO 22557:2019(E)

COPYR
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.