Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip

This standard specifies the requirements for a two component polyurethane top coat to be applied over top coats in line with EN 2434 to provide an anti slip surface for walkway/step areas in aerospace applications.
The paint shall be formulated to meet the requirements of this standard or alternatively shall consist of material approved to and complying with the requirements the appropriate parts of EN 2434 together with a non-metallic anti slip agent.

Luft- und Raumfahrt - Beschichtungsstoffe - Zweikomponenten-Polyurethan-Beschichtung, kalthärtend, tritt- und rutschfest

Diese Norm legt die Anforderungen an eine Zweikomponenten-Polyurethan Deckbeschichtung fest, die über Deckbeschichtungen nach EN 2434 aufgebracht werden soll, um eine rutsch- und trittfeste Oberfläche für Laufsteg-/Treppenbereiche bei Anwendungen in der Luft  und Raumfahrt herzustellen.
Die Beschichtung muss so aufbereitet werden, dass die Anforderungen dieser Norm erfüllt werden, bzw. muss alternativ aus Werkstoffen, die zugelassen wurden und den Anforderungen der jeweiligen Teile von EN 2434 entsprechen, sowie einem nichtmetallischen Rutschhemmer bestehen.

Série aérospatiale - Peintures et vernis - Peinture polyurethane à deux composants polymérisant à température ambiante, antidérapante

Aeronavtika - Barve in laki - Dvokomponentna poliuretanska barva, ki se suši pri sobni temperaturi in ne drsi

General Information

Status
Published
Publication Date
27-Mar-2007
Withdrawal Date
29-Sep-2007
Technical Committee
Drafting Committee
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
30-Jun-2017

Buy Standard

Standard
EN 4588:2009
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Barve in laki - Dvokomponentna poliuretanska barva, ki se suši pri sobni temperaturi in ne drsiLuft- und Raumfahrt - Beschichtungsstoffe - Zweikomponenten-Polyurethan-Beschichtung, kalthärtend, tritt- und rutschfestSérie aérospatiale - Peintures et vernis - Peinture polyurethane à deux composants polymérisant à température ambiante, antidérapanteAerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 4588:2007SIST EN 4588:2009en,de01-februar-2009SIST EN 4588:2009SLOVENSKI
STANDARD



SIST EN 4588:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4588March 2007ICS 49.040 English VersionAerospace series - Paints and varnishes - Two component, coldcuring polyurethane paint, anti slipSérie aérospatiale - Peintures et vernis - Peinturepolyurethane à deux composants polymérisant àtempérature ambiante, antidérapanteLuft- und Raumfahrt - Anstrichstoffe - ZweikomponentenPolyurethan-Beschichtung, raumtemperaturhärtend, tritt-und rutschfestThis European Standard was approved by CEN on 6 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4588:2007: ESIST EN 4588:2009



EN 4588:2007 (E) 2 Foreword This document (EN 4588:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4588:2009



EN 4588:2007 (E) 3 Contents Page Foreword.2 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Classification.5 5 Batch release and qualification testing.5 6 Designation.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.