EN ISO 14583:2011

Hexalobular socket pan head screws (ISO 14583:2011)

ISO 14583:2011 specifies the characteristics of hexalobular socket pan head screws of product grade A and with thread sizes from M2 up to and including M10.

Flachkopfschrauben mit Innnensechsrund (ISO 14583:2011)

Diese Internationale Norm legt die Eigenschaften von Flachkopfschrauben mit Innensechsrund, mit Gewinde
von M2 bis M10, mit Produktklasse A fest.
Werden in besonderen Fällen andere als in dieser Internationalen Norm aufgeführte Festlegungen benötigt,
können diese aus bestehenden Internationalen Normen wie zum Beispiel ISO 261, ISO 888, ISO 898-1,
ISO 965-2, ISO 3506-1 und ISO 4759-1 ausgewählt werden.

Vis à métaux à tête cylindrique bombée large à six lobes internes (ISO 14583:2011)

L'ISO 14583:2011 spécifie les caractéristiques des vis à métaux à tête cylindrique bombée large à six lobes internes, de diamètre de filetage M2 à M10 inclus et de grade A.

Notranji šestrogeljnik v lečasti valjasti glavi vijaka (ISO 14583:2011)

ISO 14583:2010 določa značilnosti vijakov z notranjim šestrogeljnikom v lečasti glavi razreda izdelave A in z velikostmi navojev od M2 do vključno M10.

General Information

• Status: Published
• Publication Date: 14-Mar-2011
• Withdrawal Date: 29-Sep-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Mar-2011
• Due Date: 15-Mar-2011
• Completion Date: 15-Mar-2011
• Ref Project: SIST EN ISO 14583:2012 - Hexalobular socket pan head screws (ISO 14583:2011)

Relations

• Replaces: EN ISO 14583:2001 - Hexalobular socket pan head screws (ISO 14583:2001)
• Effective Date: 08-Jun-2022
• Replaces: EN ISO 14583:2001/AC:2005 - Hexalobular socket pan head screws (ISO 14583:2001)
• Effective Date: 26-Mar-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
1DGRPHãþD
SIST EN ISO 14583:2002
SIST EN ISO 14583:2002/AC:2006
1RWUDQMLãHVWURJHOMQLNYOHþDVWLYDOMDVWLJODYLYLMDND,62
Hexalobular socket pan head screws (ISO 14583:2011)
Flachkopfschrauben mit Innnensechsrund (ISO 14583:2011)
Vis à métaux à tête cylindrique bombée large à six lobes internes (ISO 14583:2011)
Ta slovenski standard je istoveten z: EN ISO 14583:2011
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14583
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2011
ICS 21.060.10 Supersedes EN ISO 14583:2001
English Version
Hexalobular socket pan head screws (ISO 14583:2011)
Vis à métaux à tête cylindrique bombée large à six lobes Flachkopfschrauben mit Innnensechsrund (ISO
internes (ISO 14583:2011) 14583:2011)
This European Standard was approved by CEN on 31 January 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14583:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 14583:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14583:2001.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 14583:2011 has been approved by CEN as a EN ISO 14583:2011 without any modification.

INTERNATIONAL ISO
STANDARD 14583
Second edition
2011-03-15
Hexalobular socket pan head screws
Vis à métaux à tête cylindrique bombée large à six lobes internes

Reference number
ISO 14583:2011(E)
©
ISO 2011
ISO 14583:2011(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 14583:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International St
...