Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element

This Technical Specification establishes a system of graphic symbols for use in the marking of the following floor coverings and specifies the use of these symbols:
-   resilient floor coverings manufactured from plastics, linoleum, cork or rubber, excluding loose-laid mats;
-   textile floor coverings, excluding loose-laid mats;
-   laminate floor coverings;
-   floor panels for floating installation.

Elastische, textile und Laminat-Bodenbeläge - Standardisierte Symbole für Bodenbeläge

Diese Technische Spezifikation führt ein System graphischer Symbole zur Benutzung bei der Kennzeichnung der folgenden Bodenbeläge ein und legt die Anwendung dieser Symbole fest:
   elastische Bodenbeläge, hergestellt aus Kunststoff, Linoleum, Kork oder Gummi, mit Ausnahme lose ausgelegter Matten;
   textile Bodenbeläge, mit Ausnahme lose ausgelegter Matten;
   Laminat-Bodenbeläge;
   Bodenplatten zur schwimmenden Verlegung.

Revêtements de sol résilients, textiles et stratifiés - Symboles normalisés de revêtements de sol

Le présent projet de Spécification technique établit un système de symboles graphiques pour utilisation dans le marquage des revêtements de sol suivants et spécifie l’utilisation de ces symboles :
   revêtements de sol résilients en plastiques, en linoléum, en liège ou en caoutchouc, à l’exclusion des tapis en pose libre ;
   revêtements de sol textiles, à l’exclusion des tapis en pose libre ;
   revêtements de sol stratifiés ;
   panneaux de sol pour pose flottante.

Netekstilne, tekstilne in laminatne talne obloge - Standardni simboli za talne obloge - Komplementarni element

Ta dokument vzpostavlja sistem grafičnih simbolov za označevanje naslednjih talnih oblog in določa uporabo teh simbolov. – odporne talne obloge iz plastike, linoleja, plutovca ali gume, razen nepritrjenih podlog; – tekstilne talne obloge, razen nepritrjenih podlog; – laminatne talne obloge; – talne plošče za nepritrjeno polaganje.

General Information

Status
Withdrawn
Publication Date
19-Jan-2016
Withdrawal Date
24-Mar-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
25-Mar-2020

Relations

Buy Standard

Technical specification
TS CEN/TS 15398:2016
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 15398:2015
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15398:2016
01-marec-2016
1DGRPHãþD
SIST-TS CEN/TS 15398:2008
Netekstilne, tekstilne in laminatne talne obloge - Standardni simboli za talne
obloge - Komplementarni element
Resilient, textile and laminate floor coverings - Floor covering standard symbols -
Complementary element
Elastische, textile und Laminat-Bodenbeläge - Standardisierte Symbole für Bodenbeläge
Revêtements de sol résilients, textiles et stratifiés - Symboles normalisés de revêtements
de sol
Ta slovenski standard je istoveten z: CEN/TS 15398:2016
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
59.080.60 Tekstilne talne obloge Textile floor coverings
97.150 Netekstilne talne obloge Non-textile floor coverings
SIST-TS CEN/TS 15398:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15398:2016

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15398:2016


CEN/TS 15398
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

January 2016
TECHNISCHE SPEZIFIKATION
ICS 01.080.20; 59.080.60; 97.150 Supersedes CEN/TS 15398:2008
English Version

Resilient, textile and laminate floor coverings - Floor
covering standard symbols - Complementary element
Revêtements de sol résilients, textiles et stratifiés - Elastische, textile und Laminat-Bodenbeläge -
Symboles normalisés de revêtements de sol Standardisierte Symbole für Bodenbeläge
This Technical Specification (CEN/TS) was approved by CEN on 24 November 2015 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15398:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15398:2016
CEN/TS 15398:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Descriptions and definitions of symbols . 7
3.1 General . 7
3.2 Classification according to EN ISO 10874 . 7
3.3 Pictograms related to essential requirements . 10
3.3.1 General . 10
3.3.2 CE marking. 10
3.3.3 Electrical behaviour . 10
3.3.4 Fire.
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 15398:2015
01-oktober-2015
Netekstilne, tekstilne in laminatne talne obloge - Standardni simboli za talne
obloge - Komplementarni element
Resilient, textile and laminate floor coverings - Floor covering standard symbols -
Complementary element
Elastische, textile und Laminat-Bodenbeläge - Standardisierte Symbole für Bodenbeläge
Revêtements de sol résilients, textiles et stratifiés - Symboles normalisés de revêtements
de sol
Ta slovenski standard je istoveten z: FprCEN/TS 15398
ICS:
01.080.20 *UDILþQLVLPEROL]DSRVHEQR Graphical symbols for use on
RSUHPR specific equipment
59.080.60 Tekstilne talne obloge Textile floor coverings
97.150 Netekstilne talne obloge Non-textile floor coverings
kSIST-TS FprCEN/TS 15398:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 15398:2015

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 15398:2015

TECHNICAL SPECIFICATION
FINAL DRAFT
FprCEN/TS 15398
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

July 2015
ICS 01.080.20; 59.080.60; 97.150 Will supersede CEN/TS 15398:2008
English Version
Resilient, textile and laminate floor coverings - Floor covering
standard symbols - Complementary element
Revêtements de sol résilients, textiles et stratifiés - Elastische, textile und Laminat-Bodenbeläge -
Symboles normalisés de revêtements de sol Standardisierte Symbole für Bodenbeläge


This draft Technical Specification is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
134.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change without notice
and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 15398:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 15398:2015
FprCEN/TS 15398:2015 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Descriptions and definitions of symbols .7
3.1 General .7
3.2 Classification according to EN ISO 10874 .7
3.3 Pictograms related to essential requirements . 10
3.3.1 General . 10
3.3.2 CE marking . 10
3.3.3 Electrical behaviour . 10
3.3.4 Fire . 11
3.3.5 Slip . 13
3.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.