EN 15534-1:2014+A1:2017

Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products

This European Standard specifies test methods for the determination of properties of composites made from cellulose-based materials and thermoplastics, usually called wood-polymer composites (WPC) or natural fibre composites (NFC).
NOTE    For editorial reasons, in EN 15534 the abbreviation "WPC" is used for ecomposites made from cellulose-based materials and thermoplastics.
This part of EN 15534 is applicable to cellular or non-cellular compounds and products, made from cellulose-based materials and thermoplastics, intended to be or being processed through plastics processing techniques, without threshold for the cellulose-based material content.
All the properties listed in this part of EN 15534 are not necessarily assessed for a given application. Test parameters and requirements of the test methods for a given application are specified in the relevant part of EN 15534.
Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, profiles for windows or doors and profiles for guttering are not covered by EN 15534).

Verbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) - Teil 1: Prüfverfahren zur Beschreibung von Compounds und Erzeugnissen

Diese Europäische Norm legt Prüfverfahren fest zur Bestimmung der Eigenschaften von Verbundwerkstoffen aus cellulosehaltigen Materialien und Thermoplasten, üblicherweise Holz-Polymer-Werkstoffe (WPC, en: wood-polymer composites) oder Naturfaserverbundwerkstoffe (NFC, en: natural fibre composites) genannt.
ANMERKUNG 1   Aus redaktionellen Gründen wird in EN 15534 die Abkürzung „WPC“ für „Verbundwerkstoffe aus Cellulose haltigen Materialien und Thermoplasten“ verwendet.
Dieser Teil von EN 15534 gilt für geschäumte oder nicht geschäumte Compounds und Erzeugnisse, die aus cellulosehaltigen Materialien und Thermoplasten hergestellt sind, die durch plastische Verarbeitungsverfahren hergestellt wurden oder dafür vorgesehen sind, ohne Beschränkung für den Anteil an cellulosehaltigen Materialien.
Für eine bestimmte Verwendung brauchen nicht notwendigerweise alle in diesem Teil von EN 15534 aufgeführten Eigenschaften bewertet zu werden. Die Prüfverfahren und Anforderungen sind in dem entsprechenden Teil von EN 15534 festgelegt.
ANMERKUNG 2   Für Anwendungen in tragenden Konstruktionen, sind in CEN/TS 15534 2 [1] Modifikationsbeiwerte der Biegeeigenschaften von Profilen festgelegt.
Profile, die zur Verlegung von Stromkabeln, Kommunikationskabeln und Stromschienensystemen für die Verteilung von Strom verwendet werden, Profile für Fenster oder Türen und Profile für Regenrinnen werden in EN 15534 ) nicht behandelt.

Composites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1: Méthodes d'essai pour la caractérisation des compositions et des produits

La présente Norme européenne spécifie les méthodes d'essai pour la détermination des propriétés des composites à base de matières cellulosiques et de thermoplastiques, communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC).
NOTE   Pour des raisons éditoriales, dans l'EN 15534, l'abréviation « WPC » est utilisée pour « composites à base de matières cellulosiques et de thermoplastiques ».
La présente partie de l’EN 15534 s'applique aux compositions et produits expansés ou non expansés à base de matières cellulosiques et de thermoplastiques, destinés à être fabriqués ou fabriqués au moyen de techniques de transformation des plastiques, sans seuil pour la teneur en matières cellulosiques.
Il n'est pas nécessairement requis pour une application donnée d'évaluer toutes les propriétés énumérées dans la présente partie de l'EN 15534. Les paramètres d'essai et les exigences relatives aux méthodes d'essai pour une application donnée sont spécifiés dans la partie pertinente de l'EN 15534.
L'EN 15534 ne traite pas des profilés pour la gestion des câbles d'énergie électrique, des câbles de communication et des systèmes de conducteurs préfabriqués utilisés pour la distribution de l'énergie électrique, des profilés pour les fenêtres ou les portes ni des profilés pour gouttières ).

Kompoziti iz materialov na osnovi celuloze in plastomerov (navadno imenovani lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 1. del: Preskusne metode za karakterizacijo spojin in proizvodov

Ta evropski standard določa preskusne metode za ugotavljanje lastnosti kompozitov iz materialov na osnovi celuloze in plastomerov, običajno imenovanih lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC).
OPOMBA: Zaradi uredniških razlogov se v standardu EN 15534 kratica »WPC« uporablja za kompozite iz materialov na osnovi celuloze in plastomere.
Ta del standarda EN 15534 se uporablja za celulozne ali necelulozne spojine in proizvode iz materialov na osnovi celuloze in plastomerov, ki so namenjeni za obdelavo ali so obdelani s tehnikami za obdelavo plastike, brez omejitve za vsebnost materialov na osnovi celuloze.
Za posamezen primer uporabe ni treba nujno oceniti vseh lastnosti, navedenih v tem delu standarda EN 15534. Preskusni parametri in zahteve preskusnih metod za posamezen primer uporabe so navedeni v ustreznem delu standarda EN 15534.
Profili za razvrščanje električnih napajalnih kablov, komunikacijskih kablov in napajalnih tračnih sistemov, ki se uporabljajo za distribucijo električne energije, profili za okna ali vrata in profili za žlebove niso zajeti v standardu EN 15534.

General Information

• Status: Published
• Publication Date: 31-Oct-2017
• Withdrawal Date: 30-May-2018
• ICS: 79.080 - Semi-manufactures of timber
• ICS: 83.080.01 - Plastics in general
• ICS: 83.140.99 - Other rubber and plastics products
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 13 - Wood Plastics Composites (WPC)
• Current Stage: 9000 - Start of review/2 Year Review Enquiry - Review Enquiry
• Start Date: 22-Jan-2019
• Completion Date: 22-Jan-2019
• Ref Project: SIST EN 15534-1:2014+A1:2018 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products

Relations

• Merged From: EN 15534-1:2014 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
• Effective Date: 18-Jan-2023
• Merged From: EN 15534-1:2014/prA1 - Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products
• Effective Date: 30-Aug-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kompoziti iz materialov na osnovi celuloze in plastomerov (navadno imenovani lesno-polimerni kompoziti (WPC) ali kompoziti iz naravnih vlaken (NFC)) - 1. del: Preskusne metode za karakterizacijo spojin in proizvodovVerbundwerkstoffe aus cellulosehaltigen Materialien und Thermoplasten (üblicherweise Holz-Polymer-Werkstoffe (WPC) oder Naturfaserverbundwerkstoffe (NFC) genannt) - Teil 1: Prüfverfahren zur Beschreibung von Compounds und ErzeugnissenComposites à base de matières cellulosiques et de thermoplastiques (communément appelés composites bois-polymères (WPC) ou composites fibres d'origine naturelle (NFC)) - Partie 1: Méthodes d'essai pour la caractérisation des compositions et des produitsComposites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 1: Test methods for characterisation of compounds and products83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics products79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 15534-1:2014+A1:2017SIST EN 15534-1:2014+A1:2018en,fr,de01-februar-2018SIST EN 15534-1:2014+A1:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15534-1:2014+A1
November
t r s y ICS
y {ä r z râ
z uä r z rä r sâ
z uä s v rä { { Supersedes EN
s w w u væ sã t r s vEnglish Version
Composites made from celluloseæbased materials and methods for characterisation of compounds and productsComposites à base de matières cellulosiques et de caractérisation des compositions et des produits
Verbundwerkstoffe aus cellulosehaltigen Materialien Beschreibung von Compounds und Erzeugnissen This European Standard was approved by CEN on
{ November
t r s u and includes Amendment
s approved by CEN on
{ August
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s w w u væ sã t r s v ªA sã t r s y ESIST EN 15534-1:2014+A1:2018

(E) 2 Contents Page European foreword . 5 Introduction . 7 1 Scope . 8 2 Normative references . 8 3 Terms and definitions . 10 4 Test specimens . 11 5 Conditioning of test specimens . 11 5.1 General . 11 5.2 Reference conditioning . 11 5.3 Conditioning for factory production control and testing under other conditions . 12 5.4 Conditioning for tests performed by third-parties . 12 6 Physical properties . 12 6.1 Appearance (applicable to products) . 12 6.2 Density . 12 6.3 Moisture content . 12 6.4 Slipperiness . 13 6.4.1 General . 13 6.4.2 Pendulum test . 13 6.4.3 Inclination plan test . 13 6.4.4 Dynamic coefficient of friction . 14 6.5 Linear mass (applicable to profiles) . 14 6.5.1 Apparatus . 14 6.5.2 Test specimens . 15 6.5.3 Procedure. 15 6.5.4 Calculation and expression of results . 15 6.6 Dimensional characteristics. 15 6.6.1 Conditioning . 15 6.6.2 Thickness, width and length (applicable to profiles, only) . 15 6.6.3 Deviation from straightness (applicable to profiles, only) . 15 6.6.4 Cupping . 16 7 Mechanical properties . 16 7.1 Impact resistance . 16 7.1.1 Impact resistance (applicable to compounds) . 16 7.1.2 Falling mass impact resistance (applicable to products) . 17 7.1.3 Extreme temperatures . 20 7.2 Tensile properties (applicable to compounds) . 20 7.3 Flexural properties . 20 7.3.1 Flexural properties (applicable to compounds) . 20 7.3.2 Flexural properties (applicable to non-load bearing products) . 20 7.4 Creep behaviour (applicable to finished products for non-load bearing applications) . 20 7.4.1 Known span in use . 20 7.4.2 Unknown span in use . 22 7.5 Resistance to indentation. 23 SIST EN 15534-1:2014+A1:2018
...