Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method

This European Standard specifies an electrometric titration method for the determination of manganese in steels and irons.
The method is applicable to unalloyed, low alloy or alloyed steels and to irons with manganese contents greater than or equal to 0,5 % (m/m).

Chemische Analyse von Eisenwerkstoffen - Bestimmung von Mangan in Stahl und Eisen - Elektrometrisches Titrierverfahren

Diese Europäische Norm legt ein elektrometrisches Titrierverfahren zur Bestimmung des Mangangehalts von Stahl und Eisen fest.
Das Verfahren ist bei unlegierten, niedriglegierten oder legierten Stählen sowie Eisen mit Mangangehalten gleich oder größer als 0,5 % (m/m) anwendbar.

Analyse chimique des matériaux ferreux - Détermination du manganèse dans les aciers et les fontes - Méthode par titrage électrométrique

La présente Norme européenne spécifie une méthode par titrage électrométrique  pour la détermination du manganèse dans les aciers et les fontes.
La méthode est applicable aux aciers non alliés, faiblement alliés ou alliés et aux fontes ayant des teneurs en manganèse supérieures ou égales à 0,5 % (m/m).

Kemijska analiza železnih materialov - Ugotavljanje mangana v jeklih in železu - Elektrometrično-titracijska metoda

Ta evropski standard določa elektrometrično-titracijsko metodo za določevanje mangana v jeklih in železu. Metoda se uporablja za nelegirana, malolegirana ali legirana jekla in železo z vsebnostjo mangana, višjo ali enako 0,5 % (m/m).

General Information

Status
Published
Publication Date
09-Oct-2012
Withdrawal Date
29-Apr-2013
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Jun-2024

Relations

Buy Standard

Standard
EN 10071:2013
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Chemische Analyse von Eisenwerkstoffen - Bestimmung von Mangan in Stahl und Eisen - Elektrometrisches TitrierverfahrenAnalyse chimique des aciers et des fontes - Détermination du manganèse dans les aciers et les fontes - Méthode par titrage électrométriqueChemical analysis of ferrous products - Determination of manganese in steels and irons - Electrometric titration method77.080.01Železne kovine na splošnoFerrous metals in general77.040.30Kemijska analiza kovinChemical analysis of metalsICS:Ta slovenski standard je istoveten z:EN 10071:2012SIST EN 10071:2013en,fr,de01-april-2013SIST EN 10071:2013SLOVENSKI
STANDARDSIST EN 10071:19961DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10071
October 2012 ICS 77.040.30 Supersedes EN 10071:1989English Version
Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method
Analyse chimique des matériaux ferreux - Détermination du manganèse dans les aciers et les fontes - Méthode par titrage électrométrique
Chemische Analyse von Eisenwerkstoffen - Bestimmung von Mangan in Stahl und Eisen - Elektrometrisches Titrierverfahren This European Standard was approved by CEN on 17 August 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10071:2012: ESIST EN 10071:2013
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.