EN ISO 15349-2:2021

Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)

This document specifies an infrared absorption method after combustion in an induction furnace for the determination of the low carbon content in unalloyed steel.
The method is applicable to carbon contents between 0,000 3 % (mass fraction) and 0,009 % (mass fraction).

Unlegierter Stahl - Bestimmung niedriger Kohlenstoffgehalte - Teil 2: Verfahren mit Infrarotabsorption nach Verbrennung im Induktionsofen (mit Vorwärmung) (ISO 15349-2:2021)

Dieses Dokument legt ein Verfahren mit Infrarotabsorption nach Verbrennung im Induktionsofen zur Bestimmung niedriger Kohlenstoffgehalte in unlegiertem Stahl fest.
Das Verfahren ist auf Kohlenstoffgehalte zwischen 0,000 3 % (Massenanteil) und 0,009 % (Massenanteil) anwendbar.

Acier non alliés - Détermination des faibles teneurs en carbone - Partie 2: Méthode par absorption dans l'infrarouge après combustion dans un four à induction (avec préchauffage) (ISO 15349-2:2021)

Le présent document spécifie une méthode de détermination des faibles teneurs en carbone dans les aciers non alliés par absorption dans l'infrarouge après combustion dans un four à induction.
La méthode est applicable aux teneurs en carbone comprises entre 0,000 3 % (en masse) et 0,009 % (en masse).

Nelegirana jekla - Določevanje ogljika v majhnih količinah - 2. del: Metoda z infrardečo absorpcijo po zgorevanju v indukcijski peči (s predgrevanjem) (ISO 15349-2:2021)

General Information

• Status: Published
• Publication Date: 27-Jul-2021
• Withdrawal Date: 30-Jan-2022
• ICS: 77.040.30 - Chemical analysis of metals
• ICS: 77.080.20 - Steels
• Technical Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Drafting Committee: ECISS/TC 102 - Methods of chemical analysis for iron and steel
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 28-Jul-2021
• Completion Date: 28-Jul-2021
• Ref Project: SIST EN ISO 15349-2:2021 - Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)

Relations

• Replaces: EN ISO 15349-2:2003 - Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999)
• Effective Date: 04-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15349-2:2021
01-oktober-2021
Nadomešča:
SIST EN ISO 15349-2:2003
Nelegirana jekla - Določevanje ogljika v majhnih količinah - 2. del: Metoda z
infrardečo absorpcijo po zgorevanju v indukcijski peči (s predgrevanjem) (ISO
15349-2:2021)
Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption
method after combustion in an induction furnace (with preheating) (ISO 15349-2:2021)
Unlegierter Stahl - Bestimmung niedriger Kohlenstoffgehalte - Teil 2: Verfahren mit
Infrarotabsorption nach Verbrennung im Induktionsofen (mit Vorwärmung) (ISO 15349-
2:2021)
Acier non alliés - Détermination des faibles teneurs en carbone - Partie 2: Méthode par
absorption dans l'infrarouge après combustion dans un four à induction (avec
préchauffage) (ISO 15349-2:2021)
Ta slovenski standard je istoveten z: EN ISO 15349-2:2021
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.140.45 Nelegirana jekla Non-alloyed steels
SIST EN ISO 15349-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15349-2:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 15349-2:2021


EN ISO 15349-2
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2021
EUROPÄISCHE NORM
ICS 77.080.20 Supersedes EN ISO 15349-2:2003
English Version

Unalloyed steel - Determination of low carbon content -
Part 2: Infrared absorption method after combustion in an
induction furnace (with preheating) (ISO 15349-2:2021)
Acier non alliés - Détermination des faibles teneurs en Unlegierter Stahl - Bestimmung niedriger
carbone - Partie 2: Méthode par absorption dans Kohlenstoffgehalte - Teil 2: Verfahren mit
l'infrarouge après combustion dans un four à induction Infrarotabsorption nach Verbrennung im
(avec préchauffage) (ISO 15349-2:2021) Induktionsofen (mit Vorwärmung) (ISO 15349-
2:2021)
This European Standard was approved by CEN on 11 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15349-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15349-2:2021
EN ISO 15349-2:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15349-2:2021
EN ISO 15349-2:2021 (E)
European foreword
This document (EN ISO 15349-2:2021) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459/SC 2 “Methods of chemical analysis for iron and
steel ” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2022, and conflicting national standards shall
be withdrawn at the latest by January 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15349-2:2003.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European S
...