Explosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability

This EN describes a method for determining the thermal stability of electric detonators, non-electric detonators and relays.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 2: Bestimmung der thermischen Stabilität

Diese Europäische Norm beschreibt ein Verfahren zur Bestimmung der thermischen Stabilität von elektrischen Zündern, nichtelektrischen Zündern und Verzögern.

Explosifs à usage civil - Détonateurs et relais - Partie 2: Détermination de la stabilité thermique

La présente Norme européenne spécifie une méthode de détermination de la stabilité thermique des détonateurs électriques, des détonateurs non-électriques, des connecteurs de surface, des relais pour cordeau détonant ainsi que des tubes à transmission d'ondes de choc utilisés avec des détonateurs non-électriques.

Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 2. del: Ugotavljanje toplotne stabilnosti

General Information

Status
Published
Publication Date
24-Sep-2002
Withdrawal Date
30-Mar-2003
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
20-Jan-2018

Relations

Buy Standard

Standard
EN 13763-2:2002
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 2. del: Ugotavljanje toplotne stabilnostiExplosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 2: Bestimmung der thermischen StabilitätExplosifs a usage civil - Détonateurs et relais - Partie 2: Détermination de la stabilité thermiqueExplosives for civil uses - Detonators and relays - Part 2: Determination of thermal stability71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-2:2002SIST EN 13763-2:2002en01-december-2002SIST EN 13763-2:2002SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-2September 2002ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 2:Determination of thermal stabilityExplosifs à usage civil - Détonateurs et relais - Partie 2:Détermination de la stabilité thermiqueExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 2: Bestimmung derthermischen StabilitätThis European Standard was approved by CEN on 1 August 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-2:2002 E



EN 13763-2:2002 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Apparatus.55Test pieces.56Procedure.67Test report.6Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.7



EN 13763-2:2002 (E)3ForewordThis document (EN 13763-2:2002) has been prepared by Technical Committee CEN/TC 321 "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by March 2003, and conflicting national standards shall be withdrawn at the latest byMarch 2003.This European Standard has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.This European Standard is one of a series of standards with the generic title Explosives for civil uses – Detonatorsand relays. The other parts of this series are listed below:prEN 13763-1Part 1: Requirements.EN 13763-3Part 3: Determination of sensitiveness to impact.prEN 13763-4Part 4: Determination of resistance to abrasion of le
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.