Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2020)

This document specifies methods and procedures for characterizing the responses of devices used for the determination of ambient dose equivalent for the evaluation of exposure to cosmic radiation in civilian aircraft. The methods and procedures are intended to be understood as minimum requirements.

Dosimetrie zu Expositionen durch kosmische Strahlung in Zivilluftfahrzeugen - Teil 2: Charakterisierung des Ansprechvermögens von Messgeräten (ISO 20785-2:2020)

Dieses Dokument legt Verfahren und Verfahrensabläufe für die Charakterisierung des Ansprechvermögens von Geräten zur Bestimmung der Umgebungs-Äquivalentdosis fest, mit der in der zivilen Luftfahrt die Exposi-tion durch kosmische Strahlung bestimmt wird. Die Verfahren und Abläufe sind als Mindestanforderungen zu verstehen.

Dosimétrie pour l'exposition au rayonnement cosmique à bord d'un avion civil - Partie 2: Caractérisation de la réponse des instruments (ISO 20785-2:2020)

Le présent document spécifie les méthodes et les modes opératoires permettant de caractériser les réponses des dispositifs utilisés pour déterminer l'équivalent de dose ambiant en vue de l'évaluation de l'exposition au rayonnement cosmique à bord d'un avion. Les méthodes et les modes opératoires doivent être considérés comme des exigences minimales.

Dozimetrija za merjenje izpostavljenosti kozmičnemu sevanju v civilnem letalskem prometu - 2. del: Karakterizacija odziva instrumenta (ISO 20785-2:2020)

General Information

Status
Published
Publication Date
04-Aug-2020
Withdrawal Date
27-Feb-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
05-Aug-2020
Completion Date
05-Aug-2020

Relations

Buy Standard

Standard
EN ISO 20785-2:2020
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20785-2:2020
01-oktober-2020
Nadomešča:
SIST EN ISO 20785-2:2017
Dozimetrija za merjenje izpostavljenosti kozmičnemu sevanju v civilnem letalskem
prometu - 2. del: Karakterizacija odziva instrumenta (ISO 20785-2:2020)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization
of instrument response (ISO 20785-2:2020)
Dosimetrie zu Expositionen durch kosmische Strahlung in Flugzeugen der zivilen
Luftfahrt - Teil 2: Charakterisierung des Antwortverhaltens von Messinstrumenten (ISO
20785-2:2020)
Dosimétrie pour l'exposition au rayonnement cosmique à bord d'un avion civil - Partie 2:
Caractérisation de la réponse des instruments (ISO 20785-2:2020)
Ta slovenski standard je istoveten z: EN ISO 20785-2:2020
ICS:
17.240 Merjenje sevanja Radiation measurements
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN ISO 20785-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20785-2:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 20785-2:2020


EN ISO 20785-2
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2020
EUROPÄISCHE NORM
ICS 13.280; 49.020 Supersedes EN ISO 20785-2:2017
English Version

Dosimetry for exposures to cosmic radiation in civilian
aircraft - Part 2: Characterization of instrument response
(ISO 20785-2:2020)
Dosimétrie pour l'exposition au rayonnement Dosimetrie für die Belastung durch kosmische
cosmique à bord d'un avion civil - Partie 2: Strahlung in Zivilluftfahrzeugen - Teil 2:
Caractérisation de la réponse des instruments (ISO Charakterisierung des Ansprechvermögens von
20785-2:2020) Messinstrumenten (ISO 20785-2:2020)
This European Standard was approved by CEN on 30 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20785-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 20785-2:2020
EN ISO 20785-2:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 20785-2:2020
EN ISO 20785-2:2020 (E)
European foreword
This document (EN ISO 20785-2:2020) has been prepared by Technical Committee ISO/TC 85 "Nuclear
energy, nuclear technologies, and radiological protection" in collaboration with Technical Committee
CEN/TC 430 “Nuclear energy, nuclear technologies, and radiological protection” the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2021, and conflicting national standards
shall be withdrawn at the latest by February 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20785-2:2017.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedon
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.