EN ISO 2555:2018

Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)

This document specifies a method of determining apparent viscosity of resins in a liquid state using a single cylinder type rotational viscometer.
The method can be used for viscosity measurements in the range from 0,02 Pa ⋅ s to 60 000 Pa ⋅ s.
This document is applicable to both Newtonian and non-Newtonian liquids and the measured apparent viscosity depends on the velocity gradient to which the liquids are subjected during the measurement.

Kunststoffe - Harze im flüssigen Zustand, als Emulsionen oder Dispersionen - Bestimmung der scheinbaren Viskosität mit einem Rotationsviskosimeter mit Einzelzylinder (ISO 2555:2018)

Dieses Dokument legt ein Verfahren zur Bestimmung der scheinbaren Viskosität von Harzen im flüssigen Zustand mittels Rotationsviskosimeter mit Einzelzylinder fest.
Das Verfahren kann für Viskositätsmessungen im Bereich 0,02 Pa × s − 60 000 Pa × s verwendet werden.
Dieses Dokument gilt sowohl für Newtonsche und nicht Newtonsche Flüssigkeiten, wobei die gemessene scheinbare Viskosität abhängig ist vom Geschwindigkeitsgefälle der Flüssigkeiten während der Messung.

Plastiques - Résines à l'état liquide ou en émulsions ou dispersions - Détermination de la viscosité apparente par la méthode du viscosimètre rotatif de type à un cylindre (ISO 2555:2018)

Le présent document spécifie une méthode de détermination de la viscosité apparente des résines à l'état liquide à l'aide d'un viscosimètre rotatif de type à un cylindre.
La méthode peut être utilisée pour les mesurages de viscosité entre 0,02 Pa ⋅ s et 60 000 Pa ⋅ s.
Le présent document est applicable à la fois aux liquides newtoniens et non newtoniens, et la viscosité apparente mesurée dépend du gradient de vitesse auquel les liquides sont soumis pendant le mesurage.

Polimerni materiali - Tekoče smole, emulzije ali disperzije - Ugotavljanje navidezne viskoznosti z metodo enovaljnega rotacijskega viskozimetra (ISO 2555:2018)

Ta dokument določa metodo za ugotavljanje navidezne viskoznosti tekočih smol z enovaljnim rotacijskim viskozimetrom.
Metoda se lahko uporablja za meritve viskoznosti v razponu od 0,02 Pa ⋅ s do 60 000 Pa ⋅ s. Ta dokument se uporablja za newtonske in nenewtonske tekočine, pri čemer je izmerjena navidezna viskoznost odvisna od gradienta hitrosti, ki so mu tekočine izpostavljene med meritvijo.

General Information

• Status: Published
• Publication Date: 12-Jun-2018
• Withdrawal Date: 30-Dec-2018
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Jun-2018
• Completion Date: 13-Jun-2018
• Ref Project: SIST EN ISO 2555:2018 - Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)

Relations

• Replaces: EN ISO 2555:1999 - Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2555:2018
01-september-2018
1DGRPHãþD
SIST EN ISO 2555:2000
3ROLPHUQLPDWHULDOL7HNRþHVPROHHPXO]LMHDOLGLVSHU]LMH8JRWDYOMDQMHQDYLGH]QH
YLVNR]QRVWL]PHWRGRHQRYDOMQHJDURWDFLMVNHJDYLVNR]LPHWUD,62
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of
apparent viscosity using a single cylinder type rotational viscometer method (ISO
2555:2018)
Kunststoffe - Harze im flüssigen Zustand, als Emulsionen oder Dispersionen -
Bestimmung der scheinbaren Viskosität mit einem Rotationsviskosimeter mit
Einzelzylinder (ISO 2555:2018)
Plastiques - Résines à l'état liquide ou en émulsions ou dispersions - Détermination de la
viscosité apparente par la méthode du viscomètre rotatif de type à un cylindre (ISO
2555:2018)
Ta slovenski standard je istoveten z: EN ISO 2555:2018
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 2555:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2555:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 2555:2018


EN ISO 2555
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2018
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 2555:1999
English Version

Plastics - Resins in the liquid state or as emulsions or
dispersions - Determination of apparent viscosity using a
single cylinder type rotational viscometer method (ISO
2555:2018)
Plastiques - Résines à l'état liquide ou en émulsions ou Kunststoffe - Harze im flüssigen Zustand, als
dispersions - Détermination de la viscosité apparente Emulsionen oder Dispersionen - Bestimmung der
par la méthode du viscomètre rotatif de type à un scheinbaren Viskosität mit einem
cylindre (ISO 2555:2018) Rotationsviskosimeter mit Einzelzylinder (ISO
2555:2018)
This European Standard was approved by CEN on 26 May 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2555:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2555:2018
EN ISO 2555:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2555:2018
EN ISO 2555:2018 (E)
European foreword
This document (EN ISO 2555:2018) has been prepared by Technical Committee ISO/TC 61 "Plastics" in
collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2018, and conflicting national standards
shall be withdrawn at the latest by December 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2555:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovaki
...