Geographic information - Spatial referencing by coordinates (ISO 19111:2007)

ISO 19111:2007 defines the conceptual schema for the description of spatial referencing by coordinates, optionally extended to spatio-temporal referencing. It describes the minimum data required to define one-, two- and three-dimensional spatial coordinate reference systems with an extension to merged spatial-temporal reference systems. It allows additional descriptive information to be provided. It also describes the information required to change coordinates from one coordinate reference system to another.
In ISO 19111:2007, a coordinate reference system does not change with time. For coordinate reference systems defined on moving platforms such as cars, ships, aircraft and spacecraft, the transformation to an Earth-fixed coordinate reference system can include a time element.
ISO 19111:2007 is applicable to producers and users of geographic information. Although it is applicable to digital geographic data, its principles can be extended to many other forms of geographic data such as maps, charts and text documents.
The schema described can be applied to the combination of horizontal position with a third non-spatial parameter which varies monotonically with height or depth. This extension to non-spatial data is beyond the scope of ISO 19111:2007 but can be implemented through profiles.

Geoinformation - Koordinatenreferenzsysteme (ISO 19111:2007)

Information géographique - Système de références spatiales par coordonnées (ISO 19111:2007)

L'ISO 19111:2007 définit le schéma conceptuel de la description d'un système de références spatiales par coordonnées qui peut éventuellement être étendu à un système de références spatio-temporelles. Les données minimales requises pour définir des systèmes unidimensionnels, bidimensionnels et tridimensionnels de coordonnées de références spatiales avec une extension aux systèmes de références spatio-temporelles sont décrites. Cela permet de fournir des informations descriptives supplémentaires. Les informations requises pour modifier les coordonnées d'un système de coordonnées de référence à un autre sont également fournies.
Dans l'ISO 19111:2007, un système de coordonnées de référence ne change pas dans le temps. Pour les systèmes de coordonnées de référence définis sur des plates-formes mobiles telles que les véhicules, les navires, les avions et les navettes spatiales, la transformation en système de coordonnées de référence de type trièdre terrestre peut inclure un élément temporel.
L'ISO 19111:2007 est applicable aux producteurs et aux utilisateurs d'informations géographiques. Bien qu'elle soit applicable aux données géographiques numériques, il est possible d'élargir ses principes à de nombreux autres types de données géographiques tels que les cartes, les tableaux et les textes.
Le schéma décrit peut être appliqué à l'association de la position horizontale à un troisième paramètre non spatial qui varie de façon régulière avec la hauteur ou la profondeur. Cet élargissement aux données non spatiales dépasse le domaine d'application de l'ISO 19111:2007, mais il peut être mis en œuvre par l'intermédiaire des profils.

Geografske informacije - Lociranje s koordinatami (ISO 19111:2007)

General Information

Status
Withdrawn
Publication Date
30-Jun-2007
Withdrawal Date
17-Mar-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Mar-2020

Relations

Buy Standard

Standard
EN ISO 19111:2008
English language
85 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19111:2006
English language
84 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19111:2008
01-junij-2008
1DGRPHãþD
SIST EN ISO 19111:2005
Geografske informacije - Lociranje s koordinatami (ISO 19111:2007)
Geographic information - Spatial referencing by coordinates (ISO 19111:2007)
Geoinformation - Koordinatenreferenzsysteme (ISO 19111:2007)
Information géographique - Systeme de références spatiales par coordonnées (ISO
19111:2007)
Ta slovenski standard je istoveten z: EN ISO 19111:2007
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19111:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 19111
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2007
ICS 35.240.70 Supersedes EN ISO 19111:2005
English Version
Geographic information - Spatial referencing by coordinates
(ISO 19111:2007)
Information géographique - Système de références Geoinformation - Raumbezug durch Koordinaten (ISO
spatiales par coordonnées (ISO 19111:2007) 19111:2007)
This European Standard was approved by CEN on 30 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19111:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 19111:2007 (E)





Foreword


This document (EN ISO 19111:2007) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
"Geographic Information", the secretariat of which is held by NEN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2008, and conflicting national
standards shall be withdrawn at the latest by January 2008.

This document supersedes EN ISO 19111:2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


Endorsement notice

The text of ISO 19111:2007 has been approved by CEN as EN ISO 19111:2007 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 19111
Second edition
2007-07-01

Geographic information — Spatial
referencing by coordinates
Information géographique — Système de références spatiales par
coordonnées




Reference number
ISO 19111:2007(E)
©
ISO 2007

---------------------- Page: 4 ----------------------

ISO 19111:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please
...

SLOVENSKI oSIST prEN ISO 19111:2006

PREDSTANDARD
februar 2006
Geografske informacije - Lociranje s koordinatami (ISO/DIS 19111:2005)
Geographic information - Spatial referencing by coordinates (ISO/DIS 19111:2005)
ICS 07.040; 35.240.70 Referenčna številka
oSIST prEN ISO 19111:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 19111
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS Will supersede EN ISO 19111:2005
English Version
Geographic information - Spatial referencing by coordinates
(ISO/DIS 19111:2005)
Information géographique - Système de références
spatiales par coordonnées (ISO/DIS 19111:2005)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 287.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
: This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
Warning
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 19111:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 19111:2005 (E)




Foreword

This document (prEN ISO 19111:2005) has been prepared by Technical Committee ISO/TC
211 "Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC
287 "Geographic Information", the secretariat of which is held by NEN.

This document is currently submitted to the parallel Enquiry.

This document will supersede EN ISO 19111:2005.


Endorsement notice

The text of ISO 19111:2005 has been approved by CEN as prEN ISO 19111:2005 without
any modifications.

2

---------------------- Page: 3 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 19111
ISO/TC 211 Secretariat: SN
Voting begins on: Voting terminates on:
2005-11-03 2006-04-03
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Geographic information — Spatial referencing by coordinates
Information géographique — Système de références spatiales par coordonnées
[Revision of first edition (ISO 19111:2003)]
ICS 35.240.70

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT B
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.