Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017)

ISO 703:2017 specifies a test method for determining the transverse flexibility (troughability) of a conveyor belt, expressed as a ratio, F/L. The method is not suitable or valid for light conveyor belts as described in ISO 21183‑1.

Fördergurte - Biegsamkeit in Querrichtung (Muldungsfähigkeit) - Prüfverfahren (ISO 703:2017)

Courroies transporteuses - Flexibilité transversale (aptitude à la mise en auge) - Méthode d'essai (ISO 703:2017)

ISO 703:2017 spécifie une méthode d'essai pour déterminer la flexibilité transversale (aptitude à la mise en auge) d'une courroie transporteuse, exprimée comme le rapport F/L. Cette méthode n'est pas applicable ou valable pour les courroies transporteuses légères décrites dans l'ISO 21183‑1.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev - Prečna upogibnost - Preskusna metoda (ISO 703:2017)

Ta dokument določa preskusno metodo za ugotavljanje prečne upogibnosti
trakov tračnih transporterjev, izraženo kot razmerje F/L. Ta metoda ni primerna oziroma veljavna za lahke trakove tračnih transporterjev, kot so opisani v standardu ISO 21183-1.
OPOMBA: Prečna »upogibnost«, določena z metodo, opisano v tem dokumentu, je le posredno povezana z nasprotno vrednostjo upogibnega modula, kot je določen v standardu ISO 178. Prav tako ne upošteva razlik v »upogibnosti«, značilne za tri- in štiritočkovno upogibanje, ki upošteva upogibno deformacijo in debelino preskušanca.

General Information

Status
Published
Publication Date
29-Apr-2017
Withdrawal Date
30-Jul-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
25-Jan-2017
Completion Date
25-Jan-2017

Relations

Buy Standard

Standard
EN ISO 703:2017
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 703:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 703:2008
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY3UHþQD
XSRJLEQRVW3UHVNXVQDPHWRGD ,62

Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017)

Fördergurte - Biegsamkeit in Querrichtung (Muldungsfähigkeit) - Prüfverfahren (ISO

703:2017)

Courroies transporteuses - Flexibilité transversale (aptitude à la mise en auge) -

Méthode d'essai (ISO 703:2017)
Ta slovenski standard je istoveten z: EN ISO 703:2017
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 703:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 703:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 703:2017
EN ISO 703
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2017
EUROPÄISCHE NORM
ICS 53.040.20 Supersedes EN ISO 703:2007
English Version
Conveyor belts - Transverse flexibility (troughability) -
Test method (ISO 703:2017)

Courroies transporteuses - Flexibilité transversale Fördergurte - Biegsamkeit in Querrichtung

(aptitude à la mise en auge) - Méthode d'essai (ISO (Muldungsfähigkeit) - Prüfverfahren (ISO 703:2017)

703:2017)
This European Standard was approved by CEN on 8 January 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 703:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 703:2017
EN ISO 703:2017 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 703:2017
EN ISO 703:2017 (E)
European foreword

This document (EN ISO 703:2017) has been prepared by Technical Committee ISO/TC 41”Pulleys and

belts (including veebelts)” in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the

secretariat of which is held by SNV.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by July 2017, and conflicting national standards shall be

withdrawn at the latest by July 2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent

rights.
This document supersedes EN ISO 703:2007.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
Endorsement notice

The text of ISO 703:2017 has been approved by CEN as EN ISO 703:2017 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 703:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 703:2017
INTERNATIONAL ISO
STANDARD 703
Fourth edition
2017-01
Conveyor belts — Transverse flexibility
(troughability) — Test method
Courroies transporteuses — Flexibilité transversale (aptitude à la
mise en auge) — Méthode d’essai
Reference number
ISO 703:2017(E)
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 703:2017
ISO 703:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form

or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior

written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of

the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 703:2017
ISO 703:2017(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 Symbols .......................................................................................................................................................................................................................... 1

5 Principle ........................................................................................................................................................................................................................ 1

6 Apparatus (see Figure 1) .............................................................................................................................................................................. 2

7 Test piece ...................................................................................................................................................................................................................... 3

7.1 Dimensions ................................................................................................................................................................................................. 3

7.2 Conditioning .............................................................................................................................................................................................. 3

8 Procedure..................................................................................................................................................................................................................... 3

9 Calculation and expression of results ............................................................................................................................................. 4

10 Test report ................................................................................................................................................................................................................... 4

Bibliography ................................................................................................................................................................................................................................ 5

© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 703:2017
ISO 703:2017(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.