EN 15316-4-1:2008

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, combustion systems (boilers)

This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies of space heating systems and domestic hot water systems.
The scope of this specific part is to standardise the:
   required inputs;
   calculation method;
   resulting outputs;
for space heating generation by combustion sub-systems (boilers), including control.
This European Standard is the general standard on generation by combustion sub-systems (boilers). If a combustion generation sub-system is within the scope of another specific part of the EN 15316 series (i.e. part 4.x), the latter shall be used.
EXAMPLE   Biomass combustion generation sub-systems are within the scope of prEN 15316-4-7.
This European Standard is also intended for the case of generation for both domestic hot water production and space heating. The case of generation only for domestic hot water production is treated in EN 15316-3-3.

Heizungsanlagen in Gebäuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-1: Wärmeerzeugung für die Raumheizung, Verbrennungssysteme (Heizungskessel)

Diese Norm ist Teil einer Reihe von Normen zur Berechnung und Bewertung der Energieanforderungen und Nutzungsgrade der Anlagen für die Raumheizung und Trinkwassererwärmung.
Aufgabe dieses Teils ist es,
   die erforderlichen Eingaben,
   das Berechnungsverfahren,
   die sich ergebenden Ausgaben
für die Wärmeerzeugung für die Raumheizung durch Teilsysteme der Verbrennung (Heizkessel), einschließlich deren Regelung, zu normen.
Die vorliegende Europäische Norm ist die allgemeine Norm zur Wärmeerzeugung durch Verbrennungs-teilsysteme (Heizkessel). Liegt ein Verbrennungsteilsystem innerhalb des Anwendungsbereichs eines anderen Teils der Normenreihe EN 15316 (d. h. Teil 4.x), so ist dieser entsprechende Teil anzuwenden.
BEISPIEL   Biomassewärmeerzeuger liegen im Anwendungsbereich von prEN 15316 4 7.
Diese Europäische Norm ist außerdem für den Fall der kombinierten Trinkwassererwärmung und Erzeugung der Raumwärme vorgesehen. Systeme zur ausschließlichen Trinkwassererwärmung sind in EN 15316 3 3 behandelt.

Systèmes de chauffage dans les bâtiments - Méthode de calcul des besoins énergétiques et des rendements des systèmes - Partie 4-1 : Systèmes de génération de chauffage des locaux, systèmes de combustion (chaudières)

La présente Norme européenne fait partie d’une série de normes sur la méthode de calcul des besoins
énergétiques et des rendements des systèmes de chauffage des locaux et des systèmes de production d’eau
chaude sanitaire.
L’objet de cette partie spécifique est de normaliser :
⎯ les données d’entrée requises ;
⎯ la méthode de calcul ;
⎯ les données de sortie obtenues,
pour les systèmes de génération pour le chauffage des locaux par des sous-systèmes de combustion (chaudières),
y compris la régulation.
La présente Norme européenne est la norme générale relative à la génération par des sous-systèmes de
combustion (chaudières). Si un sous-système de génération par combustion relève du domaine d’application d’une
autre partie spécifique de la série EN 15316 (c’est-à-dire la Partie 4.x), c’est cette dernière qui doit être utilisée.
EXEMPLE Les sous-systèmes de génération par combustion de la biomasse relèvent du domaine d’application du
prEN 15316-4-7.
La présente Norme européenne traite également de la génération combinée pour la production d’eau chaude
sanitaire et pour le chauffage des locaux. La génération pour la production d’eau chaude sanitaire uniquement est
traitée dans l’EN 15316-3-3.

Ogrevalni sistemi v stavbah - Metoda za preračun energijskih zahtev in učinkovitosti sistema - 4-1. del: Sistemi za ogrevanje prostora, zgorevalni sistemi

General Information

• Status: Withdrawn
• Publication Date: 27-May-2008
• Withdrawal Date: 16-May-2017
• ICS: 91.140.10 - Central heating systems
• Technical Committee: CEN/TC 228 - Heating systems in buildings
• Drafting Committee: CEN/TC 228/WG 4 - Calculation methods and system performance and evaluation
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-May-2017
• Mandate: M/343 - Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and estimating the environmental impact, in accordance with the terms set forth in Directive 2002/91/EC
• Ref Project: SIST EN 15316-4-1:2008 - Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, boilers

Relations

• Replaced By: EN 15316-4-1:2017 - Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1
• Effective Date: 24-May-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Heizanlagen in Gebäuden - Berechnung und Bewertung der Energieeffizienz von Systemen - Teil 4-1: Wärmeerzeugung für die Raumheizung, VerbrennungssystemeSystemes de chauffage dans les bâtiments - Méthode de calcul des besoins énergétiques et d'efficacité des systemes - Partie 2-2-1 : Systemes de génération de chauffage des locaux, ChaudieresHeating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-1: Space heating generation systems, boilers91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 15316-4-1:2008SIST EN 15316-4-1:2008en,de01-november-2008SIST EN 15316-4-1:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15316-4-1May 2008ICS 91.140.10 English VersionHeating systems in buildings - Method for calculation of systemenergy requirements and system efficiencies - Part 4-1: Spaceheating generation systems, combustion systems (boilers)Systèmes de chauffage dans les bâtiments - Méthode decalcul des besoins énergétiques et des rendements dessystèmes - Partie 4-1 : Systèmes de génération dechauffage des locaux, systèmes de combustion(chaudières)Heizanlagen in Gebäuden - Berechnung und Bewertungder Energieeffizienz von Systemen - Teil 4-1:Wärmeerzeugung für die Raumheizung,VerbrennungssystemeThis European Standard was approved by CEN on 11 April 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15316-4-1:2008: ESIST EN 15316-4-1:2008

Sample seasonal boiler performance method
based on system typology
(typology method).50 A.1 Scope.50 A.2 Limitations in use of this method.50 A.3 Boiler typologies definition.50 SIST EN 15316-4-1:2008

Additional formulas and default values for parametering the case specific boiler efficiency method.56 B.1 Information on the method.56 B.1.1 Basic assumptions and intended use.56 B.1.2 Known approximations.56 B.2 Polynomial interpolation formulas.56 B.3 Generator efficiencies and stand-by losses.57 B.3.1 Default values for generator efficiency at full load and intermediate load as a function of the generator power output.57 B.3.2 Stand-by heat losses.59 B.3.3 Correction factor taking into account variation of efficiency depending on generator average water temperature.60 B.4 Auxiliary energy.61 B.5 Recoverable generation thermal losses.62 B.5.1 Auxiliary energy.62 B.5.2 Generator envelope.62 B.5.3 Default data according to boiler location.63 Annex C (informative)
Default values for parametering the boiler cycling method.64 C.1 Information on the method.64 C.1.1 Basic assumptions and intended use.64 C.1.2 Known approximations.64 C.2 Default specific losses.64 C.2.1 Default data for calculation of thermal losses through the chimney with burner on.64 C.2.2 Default values for calculation of thermal losses through the generator envelope.65 C.2.3 Default values for calculation of thermal losses through the chimney with the burner off.66 C.3 Default values for calculation of auxiliary energy.67 C.4 Additional default data for multistage and modulating burners.68 C.5 Additional default data for condensing boilers.69 Annex D (informative)
General part default values and information.71 D.1 Control factor.71 D.2 Intermediate load.71 Annex E (informative)
Calculation example for seasonal boiler performance method based on system typology.72 E.1 Introduction.72 E.2 Input data.72 E.3 Calculation procedure.73 E.4 Output data (connection to other parts of EN 15316).
...