EN ISO 12677:2003

Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003)

ISO 12677:2003 specifies a method for chemical analysis of refractory products and materials, and technical ceramics composed of oxides, including the determination of oxide at levels between 0,01 % and 99 % by means of the XRF fused cast bead method.

Chemische Analyse von feuerfesten Erzeugnissen durch Röntgenflureßenz - Schmelzaufschluss-Verfahren (ISO 12677:2003)

Diese Internationale Norm legt ein Verfahren zur chemischen Analyse von feuerfesten Erzeugnissen und Werkstoffen sowie oxidischer technischer Keramik fest und schließt die Bestimmung von Massenanteilen an Oxiden zwischen 0,01 % und 99 % durch die Röntgenfluoreszenzanalyse (RFA) an Schmelzaufschlüssen ein.
ANMERKUNG   Bestandteile mit Massenanteilen größer als 99 % (bezogen auf die getrocknete Substanz) sollten als Differenz angegeben werden, vorausgesetzt, alle wahrscheinlichen Nebenbestandteile und die Massenänderung durch Glühen wurden ermittelt. Auch diese Angaben sollten durch direkte Bestimmungen geprüft werden.

Analyse chimique des matériaux réfractaires par fluorescence de rayons X - Méthode de la perle fondue (ISO 12677:2003)

L'ISO 12677:2004 décrit une méthode d'analyse chimique des matériaux et des produits réfractaires, ainsi que des céramiques techniques, composés d'oxydes, et comprend la détermination d'oxydes à des concentrations comprises entre 0,01 % et 99 % par fluorescence de rayons X (méthode de la perle fondue).

Kemijska analiza ognjevzdržnih izdelkov z XRF – Metoda z vlito talino (ISO 12677:2003)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-2003
• Withdrawal Date: 30-Sep-2011
• ICS: 81.080 - Refractories
• Technical Committee: CEN/TC 187 - Refractory products and materials
• Drafting Committee: CEN/TC 187/WG 4 - Chemical analysis
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Oct-2011
• Completion Date: 01-Oct-2011
• Ref Project: SIST EN ISO 12677:2003 - Chemical analysis of refractory products by XRF - Fused cast bead method (ISO 12677:2003)

Relations

• Replaced By: EN ISO 12677:2011 - Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method (ISO 12677:2011)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12677:2003
01-november-2003
Kemijska analiza ognjevzdržnih izdelkov z XRF – Metoda z vlito talino (ISO
12677:2003)
Chemical analysis of refractory products by XRF - Fused cast bead method (ISO
12677:2003)
Chemische Analyse von feuerfesten Erzeugnissen durch Röntgenflureßenz -
Schmelzaufschluss-Verfahren (ISO 12677:2003)
Analyse chimique des matériaux réfractaires par fluorescence de rayons X - Méthode de
la perle fondue (ISO 12677:2003)
Ta slovenski standard je istoveten z: EN ISO 12677:2003
ICS:
81.080 Ognjevzdržni materiali Refractories
SIST EN ISO 12677:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12677:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 12677:2003
EUROPEAN STANDARD
EN ISO 12677
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2003
ICS 81.080
English version
Chemical analysis of refractory products by XRF - Fused cast
bead method (ISO 12677:2003)
Analyse chimique des matériaux réfractaires par Chemische Analyse von feuerfesten Erzeugnissen durch
fluorescence de rayons X - Méthode de la perle fondue Röntgenflureszenz - Schmelzaufschluss-Verfahren (ISO
(ISO 12677:2003) 12677:2003)
This European Standard was approved by CEN on 16 April 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12677:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12677:2003
EN ISO 12677:2003 (E)
CORRECTED  2003-07-02
Foreword
This document (EN ISO 12677:2003) has been prepared by Technical Committee ISO/TC 33
"Refractories" in collaboration with Technical Committee CEN/TC 187 "Refractory products and
materials", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by November 2003, and conflicting national
standards shall be withdrawn at the latest by November 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 12677:2003 has been approved by CEN as EN ISO 12677:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 12677:2003
EN ISO 12677:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 10058 1992 Magnesites and dolomites - Chemical EN ISO 10058 1996
analysis
3

---------------------- Page: 5 ----------------------

SIST EN ISO 12677:2003

---------------------- Page: 6 ----------------------

SIST EN ISO 12677:2003


INTERNATIONAL ISO
STANDARD 12677
First edition
2003-05-01


Chemic
...