EN 1492-1:2000+A1:2008
(Main)Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings, made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive.
The flat woven webbing slings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply.
Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges:
a) polyester and polyamide -40°C to 100°C,
b) polypropylene -40°C to 80°C
This European Standard does not apply to the types of webbing sling indicated below:
a) slings such as bag slings, nets (consisting of several crossed webbings stitched together), ‘adjustable’ slings (containing, for example, intermediate buckles stitched along the webbing), etc.;
b) slings made from webbing woven from monofilament yarns;
c) slings designed for pre-slinging and intended not to be re-used;
This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.
Textile Anschlagmittel - Sicherheit - Teil 1: Flachgewebte Hebebänder aus Chemiefasern für allgemeine Verwendungszwecke
Diese Europäische Norm legt Anforderungen an die Sicherheit sowie Verfahren zur Bewertung und Prüfung von ein-, zwei-, drei-, viersträngigen Hebebändern sowie von flachgewebten Endloshebebändern, mit oder ohne Beschlagteilen, aus Polyamid-, Polyester- und Polypropylen-Gurtbandgewebe, im Breitenbereich von 25 mm bis ein¬schließlich 450 mm fest.
Die in diesem Teil von EN 1492 erfassten flachgewebten Hebebänder aus Gurtbandgewebe sind für allgemeine Hebevorgänge vorgesehen, d. h. für Anwendungen zum Anheben von Gegenständen, Materialien oder Fracht¬gütern, die keine Abweichungen von den festgelegten Anforderungen, Sicherheitsfaktoren oder Tragfähigkeiten erfordern. In dieser Norm nicht festgelegt werden das Anheben von Personen, von möglicherweise gefährlichen Materialien, z. B. geschmolzenem Metall und Säuren, Glasplatten, spaltbaren Materialien, Teilen von Kernreaktoren und alle Hebevorgänge, für die Sonderbedingungen gelten.
Flachgewebte Hebebänder aus Gurtbandgewebe, die dieser Europäischen Norm entsprechen, sind für eine Benutzung und Lagerung bei Temperaturen in folgenden Bereichen geeignet:
a) Polyester und Polyamid: -40 °C bis 100 °C;
b) Polypropylen: -40 °C bis 80 °C.
Diese Europäische Norm gilt nicht für die nachfolgend angegebenen Gurt-Hebebandtypen:
a) Hebebänder wie z. B. Sackgutbrooken, Netze (bestehend aus mehreren verkreuzten und miteinander vernähten Gurtbändern), 'verstellbare' Hebebänder (die z. B. Zwischenschnallen haben, die am Gurtband aufgenäht sind) usw.;
b) Hebebänder aus Gurtbandgewebe, die aus Monofilamentgarnen gewebt sind;
c) Einweg-Hebebänder für den Schnürgang, die nicht für eine Wiederverwendung vorgesehen sind.
[...]
Elingues textiles - Sécurité - Partie 1: Elingues plates en sangles tissées en textiles chimiques d'usage courant
La présente norme spécifie les exigences relatives à la sécurité, y compris les méthodes de classification et d’essais,
d’élingues plates en sangles tissées cousues à un, deux, trois ou quatre brins ou sans fin, avec ou sans accessoires,
réalisées avec des sangles en polyamide, polyester et polypropylène, dans la plage de largeur de 25 mm
à 450 mm inclus.
Les élingues plates en sangles tissées, couvertes par la présente partie de l’EN 1492, sont prévues pour des
applications de levage générales, c’est-à-dire le levage d’objets, de matériels ou de marchandises qui ne nécessitent
aucun écart par rapport aux exigences, coefficients de sécurité ou charge maximale d’utilisation spécifiés.
Les opérations de levage non couvertes par la présente norme sont le levage de personnes, de matériaux
potentiellement dangereux tels que le métal fondu, les acides, les vitres, les matériaux fissiles, les réacteurs
nucléaires ou lorsque des conditions spéciales s’appliquent.
Les élingues plates en sangles tissées, conformes à la présente norme européenne, sont adaptées pour l’utilisation
et le stockage dans les plages de températures suivantes :
a) polyester et polyamide – 40 °C à 100 °C ;
b) polypropylène – 40 °C à 80 °C.
La présente norme ne s’applique pas aux types d’élingues en sangles suivantes :
a) élingues telles que les élingues bâches, les élingues filets (composées de sangles croisées cousues ensemble),
élingues «réglables» (comportant par exemple des boucles intermédiaires cousues le long de la sangle), etc. ;
b) élingues faites en sangles tissées en fils monofilaments ;
c) élingues utilisées pour le pré-élingage des charges et non réutilisables.
Tekstilne obese - Varnost - 1. del: Pletene ploščate obese iz umetnih vlaken za splošno uporabo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Textile Anschlagmittel - Sicherheit - Teil 1: Flachgewebte Hebebänder aus Chemiefasern für allgemeine VerwendungszweckeElingues textiles - Sécurité - Partie 1: Elingues plates en sangles tissées en textiles chimiques d'usage courantTextile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use53.020.30Pribor za dvigalno opremoAccessories for lifting equipmentICS:Ta slovenski standard je istoveten z:EN 1492-1:2000+A1:2008SIST EN 1492-1:2001+A1:2009en,fr01-januar-2009SIST EN 1492-1:2001+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1492-1:2000+A1
November 2008 ICS 53.020.30 Supersedes EN 1492-1:2000 English Version
Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
Elingues textiles - Sécurité - Partie 1: Elingues plates en sangles tissées en textiles chimiques d'usage courant
Textile Anschlagmittel - Sicherheit - Teil 1: Flachgewebte Hebebänder aus Chemiefasern für allgemeine Verwendungszwecke This European Standard was approved by CEN on 25 June 2000 and includes Corrigendum 1 issued by CEN on 7 June 2006 and Amendment 1 approved by CEN 11 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1492-1:2000+A1:2008: ESIST EN 1492-1:2001+A1:2009
Methods of test to verify safety requirements.22 Figure A.1 — Position of marking to divide sewn webbing component into four equal parts.22 Annex B (normative)
Information for use and maintenance to be provided by the manufacturer.25 Annex C (informative)
Guidance to the manufacturer for the conduct of type testing to verify the interaction of the sewn webbing component with fittings for sling type C/Cr in accordance with A.4.27 Annex D (informative)
Suggested content of information to be provided by the manufacturer with flat woven webbing slings.28 Figure D.1 — Illustration showing inadequate accommodation of a webbing eye on a hook of too small radius.30 Figure D.2 — Double choke hitch.32 Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""".34 SIST EN 1492-1:2001+A1:2009
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""".35 Bibliography.36
Foreword This document (EN 1492-1:2000+A1:2008) has been prepared by Technical Committee CEN/TC 168 “Chains, ropes, webbing, slings and accessories - Safety”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. This document supersedes EN 1492-1:2000. This document includes Amendment 1, approved by CEN on 2008-09-11 and Corrigendum 1 issued by CEN on 2006-06-07. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". The modifications of the related CEN Corrigendum have been implemented at the appropriate places in the text and are indicated by the tags ˜ ™. This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). !For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this document." This European Standard is one of a series of standards related to safety for textile slings as listed below: Part 1: Specification for flat woven webbing slings, made of man-made fibres, for general purpose use Part 2: Specification for roundslings, made of man-made fibres, for general purpose use Part 4: Specification for lifting slings for general service made from natural and man-made fibre rope In this standard: Annex A is normative, and gives the test methods to be used to verify the safety requirements. Annex B is normative, and gives the requirements for information on use and maintenance to be provided by the manufacturer with flat woven webbing slings conforming to this European Standard. Annex C is informative, and gives guidance for the conduct of type tests in accordance with annex A. Annex D is informative, and provides some detailed information for use and maintenance which may be appropriate in compiling the information in accordance with annex B. !Annexes ZA and ZB are informative and give" the relationship with EU Directives. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1492-1:2001+A1:2009
Introduction This European Standard has been prepared to be a harmonized standard providing one means of complying with the essential safety requirements of the Machinery Directive and associated EFTA regulations. This European Standard is a type C standard as specified in EN 292. The lifting accessories concerned and the extent to which hazards are covered is indicated in the scope of this standard.
NOTE For hazards that are not covered by this standard, lifting accessories should be in accordance with EN 292. 1 Scope This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings,
made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive. The flat woven webbing slings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply.
Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide -40°C to 100°C, b) polypropylene -40°C to 80°C This European Standard does not apply to the types of webbing sling indicated below: a) slings such as bag slings, nets (consisting of several crossed webbings stitched together), ‘adjustable’ slings (containing, for example, intermediate buckles stitched along the webbing), etc.; b) slings made from webbing woven from monofilament yarns; c) slings designed for pre-slinging and intended not to be re-used; This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative. SIST EN 1492-1:2001+A1:2009
2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 292-2:1991/A1:1995, Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles and specifications EN 1050:1996, Safety of machinery - Principles of risk assessment prEN 1677-1:2000, Components for slings – Safety – Part 1: Forged steel components, Grade 8 prEN 1677-2:2000, Components for slings – Safety – Part 2: Forged steel lifting hooks with latch, Grade 8 prEN 1677-3:1998, Components for slings – Safety – Part 3: Forged steel self-locking hooks, Grade 8 prEN 1677-4:1998, Components for slings – Safety – Part 4: Links, Grade 8 prEN 1677-5:1998, Components for slings – Safety – Part 5: Forged steel lifting hooks with latch, Grade 4 prEN 1677-6:1998, Components for slings – Safety – Part 6: Links, Grade 4 EN 10002-2: 1991, Metallic materials - Tensile testing –- Part 2: Verification of the force measuring system of the tensile testing machines EN 45012, General requirements for bodies operating assessment and certification/registration of quality systems (ISO/IEC Guide 62:1996) EN ISO 5084:1996, Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996) EN ISO 9002, Quality systems - Model for quality assurance in production, installation and servicing (ISO 9002:1994) 3 Terms and definitions For the purposes of this standard, the following terms, definitions, symbols and abbreviations apply. 3.1 flat woven webbing sling flexible sling consisting of a sewn webbing component
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.