EN ISO 11064-4:2004
(Main)Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2004)
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2004)
ISO 11064-4:2004 specifies ergonomic principles, recommendations and requirements for the design of workstations found in control centres. It covers workstation design with particular emphasis on layout and dimensions. This standard covers primarily seated, visual-display-based workstations although sit/stand workstations are also addressed. These workstations are to be found in applications such as transportation control, process control and security installations.
Ergonomische Gestaltung von Leitzentralen - Teil 4: Auslegung und Maße von Arbeitsplätzen (ISO 11064-4:2004)
Dieser Teil von ISO 11064 legt ergonomische Grundsätze, Empfehlungen und Anforderungen für die Gestaltung von Arbeitsplätzen in Leitzentralen fest. Dabei werden besonders Auslegung und Maße bei der Gestaltung von Arbeitsplätzen berücksichtigt. Diese Norm behandelt vor allem Sitzarbeitsplätze mit Bildschirmgeräten, obgleich Arbeitsplätze, die abwechselndes Sitzen und Stehen erfordern, ebenfalls angesprochen werden. Diese Arbeitsplätze finden zum Beispiel Anwendung in der Transport- und Prozesslenkung und in Sicherheitseinrichtungen.
Conception ergonomique des centres de commande - Partie 4: Agencement et dimensionnement du poste de travail (ISO 11064-4:2004)
L'ISO 11064-4:2004 spécifie les principes ergonomiques, les recommandations et les exigences pour la conception des postes de travail dans les centres de commande. Elle couvre la conception des postes de travail, en prêtant une attention particulière à l'agencement et au dimensionnement. Elle couvre principalement les postes de travail pour posture assise et équipés d'écrans de visualisation, mais traite également des postes de travail pour posture assise/debout. Ces postes de travail sont mis en place dans des applications touchant à des domaines tels que le contrôle du transport, la commande de processus et les installations de sécurité.
Ergonomsko načrtovanje krmilnih centrov - 4. del: Ureditev in mere delovnih mest (ISO 11064-4:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 11064-4:2004
01-november-2004
(UJRQRPVNRQDþUWRYDQMHNUPLOQLKFHQWURYGHO 8UHGLWHYLQPHUHGHORYQLKPHVW
,62
Ergonomic design of control centres - Part 4: Layout and dimensions of workstations
(ISO 11064-4:2004)
Ergonomische Gestaltung von Leitzentralen - Teil 4: Auslegung und Maße von
Arbeitsplätzen (ISO 11064-4:2004)
Conception ergonomique des centres de commande - Partie 4: Agencement et
dimensionnement du poste de travail (ISO 11064-4:2004)
Ta slovenski standard je istoveten z: EN ISO 11064-4:2004
ICS:
13.180 Ergonomija Ergonomics
25.040.10 9HþRSHUDFLMVNLVWURML Machining centres
SIST EN ISO 11064-4:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 11064-4:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 11064-4:2004
---------------------- Page: 3 ----------------------
SIST EN ISO 11064-4:2004
---------------------- Page: 4 ----------------------
SIST EN ISO 11064-4:2004
INTERNATIONAL ISO
STANDARD 11064-4
First edition
2004-07-01
Ergonomic design of control centres —
Part 4:
Layout and dimensions of workstations
Conception ergonomique des centres de commande —
Partie 4: Agencement et dimensionnement du poste de travail
Reference number
ISO 11064-4:2004(E)
©
ISO 2004
---------------------- Page: 5 ----------------------
SIST EN ISO 11064-4:2004
ISO 11064-4:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 11064-4:2004
ISO 11064-4:2004(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Initial workstation layout considerations . 3
5 Factors determining control workstation design . 5
5.1 User population. 5
5.1.1 General user considerations. 5
5.1.2 User requirements . 5
5.2 Visual tasks . 8
5.2.1 General visual considerations. 8
5.2.2 General visual reco
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.