EN ISO 14343:2007

Welding consumables - Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels - Classification (ISO 14343:2002 and ISO 14343:2002/Amd1:2006)

Specifies requirements for classification of wire electrodes, wires and rods for gas shielded metal arc welding, gas tungsten arc welding, plasma arc welding and submerged arc welding of stainless and heat resisting steels. The classification of the wire electrodes, wires and rods is based upon their chemical composition.

Schweißzusätze - Drahtelektroden, Bandelektroden, Drähte und Stäbe zum Schmelzschweißen von nichtrostenden und hitzebeständigen Stählen - Einteilung (ISO 14343:2002 und ISO 14343:2002/Amd1:2006)

Produits consommables pour le soudage - Fils-électrodes, fils d'apport et baguettes d'apport pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées - Classification (ISO 14343:2002 et ISO 14343:2002/Amd1:2006)

Dodajni materiali za varjenje - Žične elektrode, trakovi, žice in palice za talilno varjenje nerjavnih in ognjeodpornih jekel - Razvrščanje (ISO 14343:2002 in ISO 14343:2002/Amd1:2006)

General Information

• Status: Withdrawn
• Publication Date: 20-Feb-2007
• Withdrawal Date: 14-Nov-2009
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Nov-2009
• Completion Date: 15-Nov-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 14343:2007 - Welding consumables - Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels - Classification (ISO 14343:2002 and ISO 14343:2002/Amd1:2006)

Relations

• Replaces: EN 12072:1999 - Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 14343:2009 - Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2009)
• Effective Date: 21-Nov-2009

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Welding consumables - Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels - Classification (ISO 14343:2002 and ISO 14343:2002/Amd1:2006)$PGProduits consommables pour le soudage - Fils-électrodes, fils d'apport et baguettes d'apport pour le soudage a l'arc des aciers inoxydables et des aciers résistant aux températures élevées - Classification (ISO 14343:2002 et ISO 14343:2002/Amd1:2006)Schweißzusätze - Drahtelektroden, Bandelektroden, Drähte und Stäbe zum Schmelzschweißen von nichtrostenden und hitzebeständigen Stählen - Einteilung (ISO 14343:2002 und ISO 14343:2002/Amd1:2006)Ta slovenski standard je istoveten z:EN ISO 14343:2007SIST EN ISO 14343:2007en,fr,de25.160.20ICS:SIST EN 12072:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN ISO 14343:200701-september-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 14343February 2007ICS 25.160.20Supersedes EN 12072:1999
English VersionWelding consumables - Wire electrodes, strip electrodes, wiresand rods for fusion welding of stainless and heat resisting steels- Classification (ISO 14343:2002 and ISO14343:2002/Amd1:2006)Produits consommables pour le soudage - Fils-électrodes,fils d'apport et baguettes d'apport pour le soudage à l'arcdes aciers inoxydables et des aciers résistant auxtempératures élevées - Classification (ISO 14343:2002 etISO 14343:2002/Amd1:2006)Schweißzusätze - Drahtelektroden, Bandelektroden, Drähteund Stäbe zum Schmelzschweißen von nichtrostenden undhitzebeständigen Stählen - Einteilung (ISO 14343:2002 undISO 14343:2002/Amd1:2006)This European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 14343:2007: E



EN ISO 14343:2007 (E) 2 Foreword The text of ISO 14343:2002 and ISO 14343:2002/Amd1:2006 have been prepared by Technical Committee IIW “International Institute of Welding” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 14343:2007 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2007, and conflicting national standards shall be withdrawn at the latest by August 2007. This document superseds EN 12072:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice The text of ISO 14343:2002 and ISO 14343:2002/Amd1:2006 have been approved by CEN as a EN ISO 14343:2007 without any modifications.



Reference numberISO 14343:2002(E)© ISO 2002
INTERNATIONAL STANDARD ISO14343First edition2002-02-15Welding consumables — Wire electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification Produits consommables pour le soudage — Fils-électrodes, fils d'apport et baguettes d'apport pour le soudage à l'arc des aciers inoxydables et des aciers résistant aux températures élevées — Classification



ISO 14343:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing th
...