Petroleum liquids - Manual sampling (ISO 3170:2004)

ISO 3170:2004 specifies the manual methods to be used for obtaining samples of liquid or semi-liquid hydrocarbons, tank residues and deposits from fixed tanks, railcars, road vehicles, ships and barges, drums and cans, or from liquids being pumped in pipelines.
ISO 3170:2004 applies to the sampling of petroleum products, crude oils and intermediate products, which are stored in tanks at or near atmospheric pressure, or transferred by pipelines, and are handled as liquids at temperatures from near ambient up to 200 degrees Celsius.
The sampling procedures specified are not intended for the sampling of special petroleum products which are the subject of other International Standards, such as electrical insulating oils (IEC 60475), liquefied petroleum gases (ISO 4257), liquefied natural gases (ISO 8943) and gaseous natural gases (ISO 10715).

Flüssige Mineralölerzeugnisse - Manuelle Probenahme (ISO 3170:2004)

Diese Internationale Norm legt die manuellen Verfahren fest, die anzuwenden sind, um Proben von flüssigen oder halb-flüssigen Kohlenwasserstoffen, Tankrückständen und Ablagerungen aus feststehenden Tanks, Eisenbahnkesselwagen, Straßentankwagen, Schiffen und Lastkähnen, Fässern und Kanistern oder aus Flüssigkeiten, die durch Rohrleitungen gepumpt werden, zu gewinnen.
Die Norm bezieht sich auf die Probenahme von Mineralölerzeugnissen, Rohölen und Zwischenprodukten, welche in Tanks bei oder nahe bei Atmosphärendruck gelagert oder die durch Rohrleitungen gefördert werden und welche bei Temperaturen von etwa Umgebungstemperatur bis zu 200 °C als Flüssigkeiten vorliegen.
Die hier beschriebenen Verfahren zur Probenahme gelten nicht für die Probenahme von speziellen Mineralölerzeugnissen, die anderen Normen unterliegen, wie beispielsweise Isolieröle (IEC 60475), Flüssiggase (ISO 4257), verflüssigtes Erdgas (ISO 8943) und gasförmige Erdgase (ISO 10715).
Diese Internationale Norm bezieht sich auf existierende Probenahmeverfahren und gebräuchliche Ausrüstungen. Es ist jedoch nicht beabsichtigt, den Gebrauch von neuerer Ausrüstung, die noch nicht für die allgemeine Anwendung entwickelt wurde, auszuschließen, vorausgesetzt, dass solche Ausrüstungen eine Probenahme in Übereinstimmung mit den Anforderungen und Verfahren dieser Internationalen Norm ermöglichen.
ANMERKUNG   Für den Zweck dieser Internationalen Norm darf das Symbol % (m/m) verwendet werden, um Massenanteile in Prozent auszudrücken.

Produits pétroliers liquides - Echantillonnage manuel (ISO 3170:2004)

L'ISO 3170:2004 spécifie les méthodes manuelles de prélèvement à employer en vue d'obtenir des échantillons d'hydrocarbures liquides ou semi-liquides, de résidus et de dépôts contenus dans des réservoirs fixes, des wagons-citernes, des camions-citernes, des navires-citernes, des chalands, des fûts et des bidons, ou de liquides en cours de pompage dans des oléoducs.
L'ISO 3170:2004 s'applique à l'échantillonnage de produits pétroliers, de pétroles bruts et de produits intermédiaires, stockés dans des réservoirs à la pression atmosphérique ou approchante, ou acheminés par oléoduc, et qui sont manutentionnés à l'état liquide à des températures allant d'une température voisine de celle ambiante à 200 °C.
Les méthodes d'échantillonnage spécifiées ne concernent pas certains produits pétroliers qui font l'objet d'autres Normes internationales, tels que les huiles diélectriques (CEI 60475), les gaz de pétrole liquéfiés (ISO 4257), les gaz naturels liquéfiés (ISO 8943) et à l'état gazeux (ISO 10715).

Naftne tekočine - Ročno vzorčenje (ISO 3170:2004)

General Information

Status
Published
Publication Date
31-Jan-2004
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
15-May-2009
Completion Date
15-May-2009

Relations

Buy Standard

Standard
EN ISO 3170:2004
English language
57 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3170:2004
01-julij-2004
1DGRPHãþD
SIST EN ISO 3170:1999
1DIWQHWHNRþLQH5RþQRY]RUþHQMH ,62
Petroleum liquids - Manual sampling (ISO 3170:2004)
Flüssige Mineralölerzeugnisse - Manuelle Probenahme (ISO 3170:2004)
Produits pétroliers liquides - Echantillonnage manuel (ISO 3170:2004)
Ta slovenski standard je istoveten z: EN ISO 3170:2004
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
SIST EN ISO 3170:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3170:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 3170:2004
EUROPEAN STANDARD
EN ISO 3170
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2004
ICS 75.080 Supersedes EN ISO 3170:1998
English version
Petroleum liquids - Manual sampling (ISO 3170:2004)
Produits pétroliers liquides - Echantillonnage manuel (ISO Flüssige Mineralölerzeugnisse - Manuelle Probenahme
3170:2004) (ISO 3170:2004)
This European Standard was approved by CEN on 16 January 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3170:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3170:2004
EN ISO 3170:2004 (E)
CORRECTED 2004-03-17
Foreword
This document (EN ISO 3170:2004) has been prepared by Technical Committee ISO/TC 28
"Petroleum products and lubricants" in collaboration with Technical Committee CEN/TC 19
"Petroleum products, lubricants and related products", the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2004, and conflicting national
standards shall be withdrawn at the latest by August 2004.
This document supersedes EN ISO 3170:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 3170:2004 has been approved by CEN as EN ISO 3170:2004 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3170:2004

INTERNATIONAL ISO
STANDARD 3170
Third edition
2004-02-01


Petroleum liquids — Manual sampling
Produits pétroliers liquides — Échantillonnage manuel





Reference number
ISO 3170:2004(E)
©
ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 3170:2004
ISO 3170:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2004
All rights reserved. Unless o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.