EN 10305-3:2010
(Main)Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section for precision applications with specified outside diameter D <= 193,7 mm.
NOTE This document may also be applied to other types (excluding square and rectangular) of cross section.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre
Diese Europäische Norm enthält die technischen Lieferbedingungen für geschweißte maßgewalzte Präzisionsrohre
aus Stahl mit kreisförmigem Querschnitt und einem Nennaußendurchmesser D ≤ 193,7 mm.
ANMERKUNG Dieses Dokument darf auch für andere (mit Ausnahme quadratischer und rechteckiger) Querschnittsarten
angewendet werden.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte maximale
Oberflächenrauheit charakterisiert. Typische Anwendungsgebiete sind der Fahrzeugbau, die Möbelindustrie
und der Allgemeine Maschinenbau.
Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froid
La présente Norme européenne spécifie les conditions techniques de livraison pour les tubes en acier soudés calibrés à froid, de section circulaire, destinés aux applications de précision avec un diamètre extérieur spécifié D =< 193,7 mm.
NOTE Le présent document peut aussi s'appliquer à d'autres types de section (à l'exclusion des carrés et rectangulaires).
Les tubes conformes au présent document se caractérisent par des tolérances dimensionnelles précises et par une rugosité maximale spécifiée. Les domaines typiques d'application se situent dans le secteur automobile, l'ameublement et l'ingénierie générale.
Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 3. del: Varjene hladno dimenzionirane cevi
Ta evropski standard opredeljuje tehnične pogoje dostave za varjene hladno dimenzionirane cevi okroglega prereza za natančno uporabo z določenim zunanjim premerom ≤ 193,7 mm. OPOMBA: Ta dokument lahko velja tudi za druge vrste prerezov. Cevi so s tem dokumentom določene tako, da imajo natančno opredeljena odstopanja pri dimenzijah in določeno najvišjo površinsko hrapavost. Značilna področja uporabe so v avtomobilski, pohištveni in splošnih inženirskih industrijah.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte RohreTubes de précision en acier - Conditions techniques de livraison - Partie 3: Tubes soudés calibrésSteel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-3:2010SIST EN 10305-3:2010en01-marec-2010SIST EN 10305-3:2010SLOVENSKI
STANDARDSIST EN 10305-3:20031DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-3
January 2010 ICS 77.140.75 Supersedes EN 10305-3:2002English Version
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froid
Präzisionsstahlrohre - Technische Lieferbedingungen -Teil 3: Geschweißte maßgewalzte Rohre This European Standard was approved by CEN on 22 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10305-3:2010: ESIST EN 10305-3:2010
Technical delivery conditions, consists of the following parts: Part 1: Seamless cold drawn tubes Part 2: Welded cold drawn tubes Part 3: Welded cold sized tubes Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems Part 5: Welded cold sized square and rectangular tubes Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
NOTE This document may also be applied to other types (excluding square and rectangular) of cross section. Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10020:2000, Definition and classification of grades of steel EN 10021:2006, General technical delivery conditions for steel products EN 10027-1, Designation systems for steels — Part 1: Steel names EN 10027-2, Designation systems for steels — Part 2: Numerical system EN 10052:1993, Vocabulary of heat treatment terms for ferrous products EN 10168, Steel products — Inspection documents — List of information and description EN 10204, Metallic products — Types of inspection documents EN 10246-11), Non-destructive testing of steel tubes — Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness EN 10246-32), Non-destructive testing of steel tubes — Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections EN 10246-53), Non-destructive testing of steel tubes — Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfections
1) Under revision to become EN ISO 10893-1, Non-destructive testing of steel tubes
Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak-tightness instead of the hydrostatic test (ISO/DIS 10893-1:2009). 2) Under revision to become EN ISO 10893-2, Non-destructive testing of steel tubes
Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO/DIS 10893-2:2009). 3) Under revision to become EN ISO 10893-3, Non-destructive testing of steel tubes
Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections (ISO/DIS 10893-3:2009). SIST EN 10305-3:2010
(ISO 6892-1:2009) EN ISO 8492, Metallic materials — Tube — Flattening test (ISO 8492:1998) EN ISO 8493, Metallic materials — Tube — Drift-expanding test (ISO 8493:1998) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10020:2000, EN 10021:2006,
EN 10052:1993, EN 10266:2003 and the following apply. 3.1 employer organization for which a person works on a regular basis
NOTE The employer can be either the tube manufacturer or a third party organization providing non-destructive testing (NDT) services. 3.2 manufacturer party to produce and to deliver tubes in accordance with this document NOTE Where tubes are delivered by a supplier, see EN 10021:2006, Clause 6. 3.3
imperfection discontinuity in the wall or
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.