EN 10305-3:2016

Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes

This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section for precision applications with specified outside diameter D ≤ 193,7 mm.
This document may also be applied to other types (excluding square and rectangular) of cross section.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre

Diese Europäische Norm enthält die technischen Lieferbedingungen für geschweißte maßgewalzte Präzi¬sions-rohre aus Stahl mit kreisförmigem Querschnitt und einem Nennaußendurchmesser D  193,7 mm.
ANMERKUNG   Dieses Dokument darf auch für andere (mit Ausnahme quadratischer und rechteckiger) Querschnitts-arten angewendet werden.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte maxi¬male Oberflächenrauheit charakterisiert. Typische Anwendungsgebiete sind der Fahrzeugbau, die Möbel¬industrie und der Allgemeine Maschinenbau.

Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froid

La présente Norme européenne spécifie les conditions techniques de livraison pour les tubes en acier soudés calibrés à froid, de section circulaire, destinés aux applications de précision avec un diamètre extérieur spécifié D ≤ 193,7 mm.
Le présent document peut aussi s'appliquer à d'autres types de section (à l'exclusion des carrés et rectangulaires).
Les tubes conformes au présent document se caractérisent par des tolérances dimensionnelles précises et par une rugosité maximale spécifiée. Les domaines typiques d'application se situent dans le secteur automobile, l'ameublement et l'ingénierie générale.

Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 3. del: Varjene hladno dimenzionirane cevi

Ta evropski standard določa tehnične dobavne pogoje za varjene hladno dimenzionirane cevi s krožnim prečnim prerezom za precizno uporabo z določenim zunanjim premerom D ≤ 193,7 mm.
OPOMBA:   Ta dokument se lahko uporablja tudi za druge vrste prečnih prerezov (razen kvadratne in pravokotne).
Cevi v skladu s tem dokumentom imajo natančno opredeljene tolerance za mere in določeno največjo površinsko hrapavost. Tipična področja uporabe so v avtomobilski in pohištveni industriji ter v splošnem inženirstvu.

General Information

• Status: Withdrawn
• Publication Date: 29-Mar-2016
• Withdrawal Date: 05-Dec-2023
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 110/WG 10 - Tubes for mechanical and general engineering purposes
• Ref Project: SIST EN 10305-3:2016 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes

Relations

• Replaces: EN 10305-3:2010 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
• Effective Date: 14-Mar-2012
• Replaced By: EN 10305-3:2023 - Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte RohreTubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froidSteel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-3:2016SIST EN 10305-3:2016en,fr,de01-oktober-2016SIST EN 10305-3:2016SLOVENSKI
STANDARDSIST EN 10305-3:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-3
March
t r s x ICS
y yä s v rä y w Supersedes EN
s r u r wæ uã t r s rEnglish Version
Steel tubes for precision applications æ Technical delivery conditions æ Part
uã Welded cold sized tubes Tubes de prßcision en acier æ Conditions techniques de livraison æ Partie
u ã Tubes soudßs calibrßs à froid
Präzisionsstahlrohre æ Technische Lieferbedingungen æTeil
uã Geschweißte maßgewalzte Rohre This European Standard was approved by CEN on
s z January
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u r wæ uã t r s x ESIST EN 10305-3:2016

193,7 mm. This document may also be applied to other types (excluding square and rectangular) of cross section. Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10020:2000, Definition and classification of grades of steel EN 10021:2006, General technical delivery conditions for steel products EN 10027-1, Designation systems for steels - Part 1: Steel names EN 10027-2, Designation systems for steels - Part 2: Numerical system EN 10052:1993, Vocabulary of heat treatment terms for ferrous products EN 10168, Steel products - Inspection documents - List of information and description EN 10204, Metallic products - Types of inspection documents EN 10266:2003, Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards EN ISO 377, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 3773) EN ISO 2566-1, Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1) EN ISO 4287, Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287) EN ISO 6892-1, Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1) EN ISO 8492, Metallic materials - Tube - Flattening test (ISO 8492) EN ISO 8493, Metallic materials - Tube - Drift-expanding test (ISO 8493) EN ISO 10893-1, Non-destructive testing of steel tubes - Part 1: Automated elec
...