Safety of woodworking machines - Surface planing and thicknessing machines

This document deals with the significant hazards, hazardous situation and events as listed in Clause 4 relevant to stationary and displaceable surface planing and thicknessing machines with an integrated feed in thicknessing mode, (with or without demountable power feed unit in planning mode) and with manual loading and unloading of the work-piece, hereinafter referred to as "machines". The cutterblock is fixed in position and for thicknessing an integrated feed is provided. The machines are designed to cut solid wood, chipboard, fibreboard and plywood when they are used as intended and under the conditions foreseen by the manufacturer.
This document does not deal with any hazards which result from the attachment of an optional mortising unit. These hazards are covered by prEN 940:2007.
This document does not apply to:
a)   machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand;
NOTE 1   Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 together with prEN 61029-2-3:2004.
b)   surface planing and thicknessing machines where the cutterblock is adjustable for depth of cut setting in thicknessing mode;
c)   machines where the conversion from planing to thicknessing mode or vice versa is achieved by mounting or demounting parts/units.
This document is not applicable to surface planing and thicknessing machines which are manufactured before the date of its publication as EN.
NOTE 2   Machines covered by this document are listed under A.5 of Annex IV of the Machinery Directive.

Sicherheit von Holzbearbeitungsmaschinen - Kombinierte Abricht- und Dickenhobelmaschinen

Dieses Dokument behandelt die in Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungs¬situationen und Gefährdungsereignisse, die auf stationäre und verschiebbare kombinierte Abricht- und Dickenhobelmaschinen mit mechanischem Vorschub in der Betriebsart Dickenhobeln (mit oder ohne abnehmbaren Vorschubapparat in der Betriebsart Abrichthobeln) und mit Werkstückaufgabe und Werkstück¬abnahme von Hand, im folgenden als „Maschinen“ bezeichnet, zutreffen. Die Messerwelle ist in fester Lage und für das Dickenhobeln ist ein mechanischer Vorschub vorhanden. Die Maschinen sind konstruiert zum Hobeln von Massivholz, Spanplatten, Faserplatten und Sperrholz, wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet werden.
Dieses Dokument behandelt nicht irgendwelche Gefährdungen, die sich aus dem Anbau einer optionalen Langlochbohreinheit ergeben. Diese Gefährdungen sind in prEN 940:2007 behandelt.
Dieses Dokument gilt nicht für:
a)   Maschinen, die auf ein Gestell oder auf einen Tisch, der einem Gestell ähnlich ist, aufgesetzt sind und die vorgesehen sind, während des Betriebs stationär verwendet zu werden und die von einer Person von Hand angehoben werden können;
ANMERKUNG 1   Transportable elektrisch angetriebene Werkzeuge sind in EN 61029-1:2000 zusammen mit prEN 61029-2-3:2004 behandelt.
b)   kombinierte Abricht- und Dickenhobelmaschinen, bei denen die Messerwelle für die Spanabnahme verstellt werden kann;
c)   Maschinen, bei denen die Umrüstung vom Abrichthobeln zum Dickenhobeln und umgekehrt durch An- oder Abbau von Teilen/Einheiten erfolgt;
d)   Maschinen, bei denen Abrichthobeln und Dickenhobeln gleichzeitig durchgeführt werden können.
Dieses Dokument gilt nicht für kombinierte Abricht- und Dickenhobelmaschinen, die vor dem Datum seiner Veröffentlichung als EN hergestellt wurden.
ANMERKUNG 2   Die in diesem Dokument behandelten Maschinen sind unter A.5 des Anhangs IV der Maschinen¬richtlinie genannt.

Sécurité des machines pour le travail du bois - Machines combinées à raboter et à dégauchir

Le présent document traite de tous les phénomènes dangereux, les situations et événements dangereux significatifs, tels qu'énumérés à l'Article 4, applicables aux machines fixes et transportables combinées à raboter et à dégauchir, à avance intégrée en mode rabotage (équipées ou non d'une unité d'alimentation mécanisée escamotable en mode dégauchissage) et à chargement/déchargement manuel de la pièce désignées ci-après sous le terme « machines ». L’outil est fixe en position et pour le rabotage une avance intégrée est fournie. Les machines sont conçues pour usiner du bois massif, des panneaux de fibres ou de particules, de contreplaqué durant l'utilisation normale et dans les conditions prévues par le constructeur.
Le présent document ne traite pas des phénomènes dangereux résultant de la fixation d’une unité de mortaisage optionnelle. Ces phénomènes dangereux sont traités dans le prEN 940:2007.
Le présent document ne s’applique pas :
a)   aux machines montées sur un établi ou une table similaire à un établi, conçues pour réaliser un travail à poste fixe, capables d’être soulevées à la main par une personne ;
NOTE   Les machines semi-fixes à entraînement électrique exclues du domaine d’application de la présente Norme européenne sont couvertes par les prescriptions de l’EN 61029-1:2000 et du prEN 61029-2-3:2004.
b)   aux machines combinées à raboter et à dégauchir à outil réglable en position pour le réglage de la profondeur de passe en mode rabotage ;
c)   aux machines dont le passage du mode dégauchissage au mode rabotage et inversement est réalisé au moyen de parties/unités de montage/démontage ;
d)   aux machines capables de raboter et de dégauchir en même temps.
Le présent document ne s'applique pas aux machines combinées à raboter et à dégauchir fabriquées avant la date de publication du présent document par le CEN.
NOTE   Les machines couvertes par le présent document figurent en A.5 de l’Annexe IV de la Directive Machines.

Varnost lesnoobdelovalnih strojev - Kombinirani in debelinski skobeljniki

General Information

Status
Withdrawn
Publication Date
19-Jun-2007
Withdrawal Date
11-Aug-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
12-Aug-2009
Completion Date
12-Aug-2009

Relations

Buy Standard

Standard
EN 861:2008
English language
64 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 861:2008
01-december-2008
1DGRPHãþD
SIST EN 861:2000
Varnost lesnoobdelovalnih strojev - Kombinirani in debelinski skobeljniki
Safety of woodworking machines - Surface planing and thicknessing machines
Sicherheit von Holzbearbeitungsmaschinen - Kombinierte Abricht- und
Dickenhobelmaschinen
Sécurité des machines pour le travail du bois - Machines combinées à raboter et à
dégauchir
Ta slovenski standard je istoveten z: EN 861:2007
ICS:
25.080.25 6WURML]DSORãþLQVNRREGHODYR Planing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN 861:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 861:2008

---------------------- Page: 2 ----------------------

SIST EN 861:2008
EUROPEAN STANDARD
EN 861
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2007
ICS 79.120.10 Supersedes EN 861:1997
English Version
Safety of woodworking machines - Surface planing and
thicknessing machines
Sécurité des machines pour le travail du bois - Machines Sicherheit von Holzbearbeitungsmaschinen - Kombinierte
combinées à raboter et à dégauchir Abricht- und Dickenhobelmaschinen
This European Standard was approved by CEN on 10 May 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 861:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 861:2008
EN 861:2007 (E)
Contents Page
Foreword.4
Introduction .5
1 Scope.6
2 Normative references.6
3 Terms and definitions .8
3.1 General.8
3.2 Definitions.8
3.3 Terms.10
4 List of significant hazards .12
5 Safety requirements and/or measures .16
5.1 General.16
5.2 Controls.16
5.2.1 Safety and reliability of control systems.16
5.2.2 Position of controls .17
5.2.3 Starting.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.