EN 1341:2001
(Main)Slabs of natural stone for external paving - Requirements and test methods
Slabs of natural stone for external paving - Requirements and test methods
This European Standard specifies the performance requirements and the corresponding test methods for all natural stone slabs, for external paving use. It provides for product marking and for the evaluation of conformity of the product to this European Standard. This European Standard covers also characteristics that are of importance to the trade. It does not cover internal flooring tiles or slabs nor does it cover the effect of de-icing salts.
Platten aus Naturstein für Außenbereiche - Anforderungen und Prüfverfahren
Diese Europäische Norm enthält die Leistungsanforderungen für sämtliche Natursteinplatten für Außen-
bereiche sowie die entsprechenden Prüfverfahren.
Sie ermöglicht die Produktkennzeichnung und Konformitätsbewertung des Produktes nach dieser Euro-
päischen Norm.
Diese Europäische Norm behandelt außerdem charakteristische Merkmale, die für den Handel von
Bedeutung sind.
Diese Norm behandelt weder Fliesen für den Innenbereich noch die Wirkung von Tausalzen (siehe 4.2).
Dalles de pierre naturelle pour le pavage extérieur - Exigences et méthodes d'essai
La présente Norme européenne spécifie les exigences de performances et les méthodes d'essais correspondantes, relatives à toutes les dalles de pierre naturelle utilisées en revêtement de sol extérieur.
Il spécifie le marquage et l'évaluation de conformité des produits à la présent document européen.
La présente Norme européenne précise également les caractéristiques importantes sur le plan commercial.
Il ne traite ni des carreaux ou des dalles pour les dallages intérieurs ni des effets des sels de déverglaçage (voir article 4.2).
Plošče iz naravnega kamna za zunanje tlakovanje - Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Platten aus Naturstein für Außenbereiche - Anforderungen und PrüfverfahrenDalles de pierre naturelle pour le pavage extérieur - Exigences et méthodes d'essaiSlabs of natural stone for external paving - Requirements and test methods93.080.20Materiali za gradnjo cestRoad construction materials91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1341:2001SIST EN 1341:2002en01-september-2002SIST EN 1341:2002SLOVENSKI
STANDARDSIST EN 1341:20011DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1341December 2001ICS 90.080.20Supersedes EN 1341:2000English versionSlabs of natural stone for external paving - Requirements andtest methodsDalles de pierre naturelle pour le pavage extérieur -Exigences et méthodes d'essaiPlatten aus Naturstein für Außenbereiche - Anforderungenund PrüfverfahrenThis European Standard was approved by CEN on 14 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1341:2001 ESIST EN 1341:2002
Measurement of dimensions.15Annex B (informative)
Calculation of breaking loads for slabs.20Annex C (normative)
Measurement of abrasion resistance.21Annex D (normative)
Measurement of unpolished slip resistance value (USRV).29Annex E (normative)
Sampling.36Annex ZA (informative)
Clauses of this European Standard addressing the provisions ofEU Construction Products Directive.37SIST EN 1341:2002
GeneralThe supplier shall state the work dimensions of each slab that is tested, unless supplied in randomsizes. Where supplied in running lengths, only the widths and thickness shall be stated.Dimensions shall be measured in accordance with annex A.4.1.2 Permissible deviations4.1.2.1 Plan dimensions (excluding slabs with irregular plan form)When measured in accordance with A.2 or A.3, the deviation from the work plan dimensions shallconform to those in Table 1.Table 1 — Deviations on plan dimensionClass 1Class 2Marking DesignationP1P2Sawn edges
700 mm 4 mm 2 mmSawn edges
700 mm 5 mm 3 mmRiven edges 10 mm 10 mmWhen measured in accordance with A.2 or A.3, the maximum difference between the measurement ofthe two diagonals of a rectangular slab shall not exceed the values given in Table 2.Table 2 — Deviations on diagonalsClassDiagonalDifferenceMarking DesignationD1D21 7006 mm7008 mm2 7003 mm7006 mm4.1.2.2 ThicknessWhen measured in accordance with A.4, the deviation from the work thickness of textured slabs shallconform to Table 3.SIST EN 1341:2002
60 mmfor thicknessmeasurement 4 mm 3 mm 60 mm thick 5 mm 4 mmFor riven slabs there is no requirement but a producer may declare appropriate permissible deviationsmeasured in accordance with A.4.4.1.2.3 Face irregularitiesWhen measured in accordance with A.5 the face irregularities on riven slabs shall be a maximum of20 mm above work thickness and not below work thickness.4.1.2.4 Flatness and straightness4.1.2.4.1 ArrisesWhen measured in accordance with A.6 the flatness deviation along the arrises of textured slabs shallconform to Table 4.Table 4 — Deviation on flatness along arrisesLongest test straightedge0,5 m1 m1,5 mFine textured face 2 mm 3 mm 4 mmCoarse textured face 3 mm 4 mm 6 mm4.1.2.4.2 FacesWhen measured in accordance with A.6 the deviations from flatness and bow shall conform to Table 5unless the surface is riven in which case the supplier/manufacturer shall supply information ondeviations.SIST EN 1341:2002
2 mm of the declared dimensions.4.2 Freeze/thaw resistanceThe producer shall declare the freeze/thaw resistance of the stone in accordance with Table 6 whentested in accordance with EN 12371.The number of cycles shall be 48. The test is carried out todetermine the effect of freeze/thaw cycles on performance characteristics (EN 12372 flexuralstrength).For some specific uses it may be appropriate to use different test cycles, for example freezing inwater, freezing to a lower temperature, or testing specimens embedded in non-porous siliceousgranules or a different number of cycles. In these cases national specification standards may befollowed but these variations shall be clearly stated in the test report.If there is no requirement for freeze/thaw resistance or no performance has been determined, thenthis shall be stated.SIST EN 1341:2002
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.