EN ISO 3887:2003
(Main)Steels - Determination of depth of decarburization (ISO 3887:2003)
Steels - Determination of depth of decarburization (ISO 3887:2003)
ISO 3887:2003 defines decarburization and specifies three methods of measuring the depth of decarburization of non-alloy and low-alloy steels.
Stahl - Bestimmung der Entkohlungstiefe
Diese Internationale Norm definiert Entkohlung und legt drei Verfahren zur Bestimmung der Entkohlungstiefe von unlegierten und niedriglegierten Stählen fest.
Aciers - Détermination de la profondeur de décarburation (ISO 3887:2003)
L'ISO 3887:2002 définit la décarburation et spécifie trois méthodes de mesurage de la profondeur de décarburation des aciers non alliés et faiblement alliés.
Jekla - Določevanje globine razogličene plasti (ISO 3887:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3887:2004
01-marec-2004
-HNOD'RORþHYDQMHJORELQHUD]RJOLþHQHSODVWL ,62
Steels - Determination of depth of decarburization (ISO 3887:2003)
Stahl - Bestimmung der Entkohlungstiefe
Aciers - Détermination de la profondeur de décarburation (ISO 3887:2003)
Ta slovenski standard je istoveten z: EN ISO 3887:2003
ICS:
77.040.99 Druge metode za Other methods of testing of
preskušanje kovin metals
77.080.20 Jekla Steels
SIST EN ISO 3887:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3887:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 3887:2004
EUROPEAN STANDARD
EN ISO 3887
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 77.040.99
English version
Steels - Determination of depth of decarburization (ISO
3887:2003)
Aciers - Détermination de la profondeur de décarburation Stahl - Bestimmung der Entkohlungstiefe (ISO 3887:2003)
(ISO 3887:2003)
This European Standard was approved by CEN on 17 January 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3887:2003 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3887:2004
EN ISO 3887:2003 (E)
CORRECTED 2003-07-16
Foreword
This document (EN ISO 3887:2003) has been prepared by Technical Committee ISO/TC 17
"Steel" in collaboration with Technical Committee ECISS/TC 2 "Steel - Physico-chemical and
non-destructive testing", the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2003, and conflicting national
standards shall be withdrawn at the latest by September.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 3887:2003 has been approved by CEN as EN ISO 3887:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3887:2004
EN ISO 3887:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 6507-1 1997 Metallic materials — Vickers hardness EN ISO 6507-1 1997
test — Part 1: Test method
ISO 9556 1989 Steel and iron — Determination of total EN ISO 9556 2001
carbon content — Infrared absorption
method after combustion in an
induction furnace
ISO 15349-2 1999 Unalloyed steel - Determination of low EN ISO 15349-2 2003
carbon content - Part 2: Infrared
absorption method after combustion in
an induction furnace (with preheating)
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3887:2004
---------------------- Page: 6 -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.