EN ISO 5667-1:2022
(Main)Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2020)
Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2020)
This document sets out the general principles for, and provides guidance on, the design of sampling programmes and sampling techniques for all aspects of sampling of water (including waste waters, sludges, effluents, suspended solids and sediments).
It does not include detailed instructions for specific sampling situations, which are covered in the various other parts of ISO 5667 and in ISO 19458.
Wasserbeschaffenheit - Probenahme - Teil 1: Anleitung zur Erstellung von Probenahmeprogrammen und Probenahmetechniken (ISO 5667-1:2020)
Dieses Dokument legt die allgemeinen Grundlagen zur Aufstellung von Probenahmeprogrammen und techniken für alle Aspekte der Wasserprobenahme (einschließlich Abwasser, Schlämme, Abläufe, Schwebstoffe und Sedimente) fest und gibt Anleitungen dazu.
Detaillierte Anweisungen für besondere Probenahmegegebenheiten sind nicht enthalten; diese sind Bestandteil der verschiedenen Teile von ISO 5667 und in ISO 19458.
Qualité de l'eau - Échantillonnage - Partie 1: Recommandations relatives à la conception des programmes et des techniques d’échantillonnage (ISO 5667-1:2020)
Le présent document énonce les principes généraux et fournit des recommandations relatives à la conception des programmes et des techniques d'échantillonnage, en tenant compte de tous les aspects relatifs à l'échantillonnage des eaux (y compris des eaux résiduaires, des boues, des effluents, des matières en suspension et des sédiments).
Il n'inclut pas de consignes détaillées pour les cas d'échantillonnages spécifiques, qui sont couvertes par les différentes autres parties de l'ISO 5667 et dans l'ISO 19458.
Kakovost vode - Vzorčenje - 1. del: Navodilo za načrtovanje programov in tehnik vzorčenja (ISO 5667-1:2020)
Ta dokument določa splošna načela ter zagotavlja smernice za načrtovanje programov vzorčenja in tehnik vzorčenja za vse vidike vzorčenja vode (vključno z odpadnimi vodami, blatom, izlivi, neraztopljenimi trdnimi snovmi in usedlinami). Ne zajema podrobnih navodil za specifične okoliščine vzorčenja, ki so obravnavane v različnih drugih delih standardov ISO 5667 in ISO 19458.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN ISO 5667-1:2007
SIST EN ISO 5667-1:2007/AC:2007
Kakovost vode - Vzorčenje - 1. del: Navodilo za načrtovanje programov in tehnik
vzorčenja (ISO 5667-1:2020)
Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and
sampling techniques (ISO 5667-1:2020)
Wasserbeschaffenheit - Probenahme - Teil 1: Anleitung zur Erstellung von
Probenahmeprogrammen und Probenahmetechniken (ISO 5667-1:2020)
Qualité de l'eau - Échantillonnage - Partie 1: Recommandations relatives à la conception
des programmes et des techniques d’échantillonnage (ISO 5667-1:2020)
Ta slovenski standard je istoveten z: EN ISO 5667-1:2022
ICS:
13.060.45 Preiskava vode na splošno Examination of water in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 5667-1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2022
EUROPÄISCHE NORM
ICS 13.060.45 Supersedes EN ISO 5667-1:2006, EN ISO 5667-
1:2006/AC:2007
English Version
Water quality - Sampling - Part 1: Guidance on the design
of sampling programmes and sampling techniques (ISO
5667-1:2020)
Qualité de l'eau - Échantillonnage - Partie 1: Wasserbeschaffenheit - Probenahme - Teil 1: Anleitung
Recommandations relatives à la conception des zur Erstellung von Probenahmeprogrammen und
programmes et des techniques d'échantillonnage (ISO Probenahmetechniken (ISO 5667-1:2020)
5667-1:2020)
This European Standard was approved by CEN on 21 February 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5667-1:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 5667-1:2022) has been prepared by Technical Committee ISO/TC 147 "Water
quality" in collaboration with Technical Committee CEN/TC 230 “Water analysis” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2022, and conflicting national standards shall
be withdrawn at the latest by August 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 5667-1:2006, EN ISO 5667-1:2006/AC:2007.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 5667-1:2020 has been approved by CEN as EN ISO 5667-1:2022 without any
modification.
INTERNATIONAL ISO
STANDARD 5667-1
Third edition
2020-12
Water quality — Sampling —
Part 1:
Guidance on the design of sampling
programmes and sampling techniques
Qualité de l'eau — Échantillonnage —
Partie 1: Recommandations relatives à la conception des programmes
et des techniques d’échantillonnage
Reference number
ISO 5667-1:2020(E)
©
ISO 2020
ISO 5667-1:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 5667-1:2020(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General safety precautions . 1
4.1 Safety of Personnel . 1
4.2 General environmental considerations . 2
5 Design of sampling programmes . 2
5.1 General . 2
5.2 Sampling personnel . 3
5.3 Broad objectives for the design of sampling programmes . 3
5.4 Specific considerations in relation to variability . 5
5.5 Identifying the sampling location . 5
6 Characteristics and conditions affecting sampling . 6
6.1 General . 6
6.2 Variations from normal sampling conditions . 7
7 Standards for sampling from water . 7
7.1 General standards in the 5667 series . 7
7.2 Standards outside the 5667 series that provide guidance on sampling
programmes in specific areas . 8
7.3 Standards within the ISO 5667 series providing specific guidance on the sampling
of a range waters . 9
8 Time and frequency of sampling .13
8.1 General .13
8.2 Water quality management programmes .13
8.3 Quality characterization programmes .13
8.4 Programmes for investigation of causes of contamination .13
8.5 Statistical considerations .14
8.5.1 Establishment of sampling programmes .14
8.5.2 Random and systematic variations of water quality .14
8.6 Duration of sampling occasion and composite samples .15
9 Flow measurements and situations justifying flow measurements for water quality
purposes .15
9.1 General .15
9.2 Direction of flow .16
9.3 Velocity of flow .16
9.4 Discharge rate .16
9.5 Flow profile .16
9.6 Cross-sectional area .17
9.7 Justification for flow measurements in water quality control management.17
9.7.1 Treatment plant loads .17
9.7.2 Dilution effects (flux calculations) . .17
9.7.3 Mass flow calculations .17
9.7.4 Transport of contaminants and rates of recovery .17
9.7.5 Flow-related parameters .17
9.7.6 Groundwaters .18
9.8 Methods available for flow measurement .18
10 Current sampling techniques .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.