CEN/TS 15413:2006

Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

This Technical Specification specifies the correct sequence of operations to ensure the representativity of the test portions that has been taken according to the sampling plan, prior to physical and/or chemical analysis (e.g. extractions, digestion and/or analytical determinations) of solid samples.
This Technical Specification specifies the correct sequence of operations and treatments to be applied to the laboratory sample in order to obtain suitable test portions in compliance with the specific requirements defined in the corresponding analytical procedures.

Feste Sekundärbrennstoffe - Verfahren zur Herstellung der Versuchsprobe aus der Laboratoriumsprobe

Combustibles solides de récupération - Méthodes pour la préparation d'échantillons pour essais à partir d'échantillons de laboratoire

Trdno alternativno gorivo - Metode za pripravo preskusnega vzorca iz laboratorijskega vzorca

General Information

• Status: Withdrawn
• Publication Date: 26-Sep-2006
• Withdrawal Date: 06-Sep-2011
• ICS: 75.160.10 - Solid fuels
• ICS: 75.160.40 - Biofuels
• Technical Committee: CEN/TC 343 - Solid Recovered Fuels
• Drafting Committee: CEN/TC 343/WG 5 - Chemical Tests
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 07-Sep-2011
• Completion Date: 07-Sep-2011
• Mandate: M/325 - Mandate to CEN on Solid Recovered Fuels (SRF)
• Ref Project: SIST-TS CEN/TS 15413:2007 - Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample

Relations

• Replaced By: EN 15413:2011 - Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15413:2007
01-marec-2007
Trdno alternativno gorivo - Metode za pripravo preskusnega vzorca iz
laboratorijskega vzorca
Solid recovered fuels - Methods for the preparation of the test sample from the laboratory
sample
Feste Sekundärbrennstoffe - Verfahren zur Herstellung der Versuchsprobe aus der
Laboratoriumsprobe
Combustibles solides de récupération - Méthodes pour la préparation d'échantillons pour
essais a partir d'échantillons de laboratoire
Ta slovenski standard je istoveten z: CEN/TS 15413:2006
ICS:
75.160.10 Trda goriva Solid fuels
SIST-TS CEN/TS 15413:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION
CEN/TS 15413
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
September 2006
ICS 75.160.10

English Version
Solid recovered fuels - Methods for the preparation of the test
sample from the laboratory sample
Combustibles solides de récupération - Méthodes pour la Feste Sekundärbrennstoffe - Verfahren zur zur Herstellung
préparation d'échantillons pour essais à partir d'échantillons einer Prüfprobe aus einer Laborprobe
de laboratoire
This Technical Specification (CEN/TS) was approved by CEN on 25 March 2006 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15413:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TS 15413:2006 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Safety remarks .6
5 Principle.6
6 Apparatus .6
7 Interferences and sources of error .6
8 Procedure .7
9 Quality control.10
10 Performance characteristics .10
11 Test report .10
Annex A (normative) Guideline for choosing sample treatment techniques .11
Annex B (informative) Relationship between minimum amount of sample and particle size.20
Annex C (informative) Sample treatment equipment.
...