EN ISO 13338:2020

Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)

ISO 13338:2017 provides:
-      for pure gases and some liquids, a complete list indicating their corrosiveness;
-      for gas mixtures, a calculation method, in the absence of experimental data, relating to the corrosiveness of each of their components;
in order to determine the corrosiveness of gases and gas mixtures on tissue so that a suitable outlet connection can be assigned to each of them.

Gasflaschen - Gase und Gasgemische - Bestimmung der Ätzwirkung auf lebendes Gewebe für die Auswahl von Ventilausgängen (ISO 13338:2017)

Dieses Dokument enthält
- für reine Gase und einige Flüssigkeiten eine vollständige Liste mit Angabe ihrer Ätzwirkung,
- für Gasgemische ein Berechnungsverfahren ohne experimentelle Daten, das sich auf die Ätzwirkung jeder ihrer Komponenten bezieht,
um die Ätzwirkung von Gasen und Gasgemischen auf Gewebe zu bestimmen, so dass jedem von ihnen ein geeigneter Ausgangsanschluss zugeordnet werden kann.

Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la corrosivité sur les tissus pour le choix des raccords de sortie de robinets (ISO 13338:2017)

Le présent document donne:
—          pour les gaz purs et certains liquides, une liste complète indiquant leur corrosivité;
—          pour les mélanges de gaz, une méthode de calcul, en l'absence de données expérimentales, tenant compte de la corrosivité de chacun de leurs composants;
dans le but de déterminer la corrosivité des gaz et mélanges de gaz sur les tissus et de permettre l'affectation d'un raccord de sortie approprié à chacun d'eux.

Plinske jeklenke - Plini in zmesi plinov - Določanje agresivnosti plinov in njihovih zmesi na tkiva za izbiro izhodnega priključka ventila na jeklenki (ISO 13338:2017)

General Information

• Status: Withdrawn
• Publication Date: 06-Oct-2020
• Withdrawal Date: 14-Jun-2022
• ICS: 71.100.20 - Gases for industrial application
• Technical Committee: CEN/TC 23 - Transportable gas cylinders
• Drafting Committee: CEN/TC 23/WG 20 - Cylinder design - Fittings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Jun-2022
• Ref Project: SIST EN ISO 13338:2020 - Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the selection of cylinder valve outlets (ISO 13338:2017)

Relations

• Replaced By: EN ISO 13338:2022 - Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
• Effective Date: 22-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13338:2020
01-december-2020
Plinske jeklenke - Plini in zmesi plinov - Določanje agresivnosti plinov in njihovih
zmesi na tkiva za izbiro izhodnega priključka ventila na jeklenki (ISO 13338:2017)
Gas cylinders - Gases and gas mixtures - Determination of tissue corrosiveness for the
selection of cylinder valve outlets (ISO 13338:2017)
Gasflaschen - Gase und Gasgemische - Bestimmung der Gewebekorrosivität von Gasen
oder Gasgemischen für die Auswahl von Ventilausgängen (ISO 13338:2017)
Bouteilles à gaz - Gaz et mélanges de gaz - Détermination de la corrosivité sur les tissus
pour le choix des raccords de sortie de robinets (ISO 13338:2017)
Ta slovenski standard je istoveten z: EN ISO 13338:2020
ICS:
23.020.35 Plinske jeklenke Gas cylinders
71.100.20 Industrijski plini Gases for industrial
application
SIST EN ISO 13338:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13338:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 13338:2020


EN ISO 13338
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2020
EUROPÄISCHE NORM
ICS 71.100.20
English Version

Gas cylinders - Gases and gas mixtures - Determination of
tissue corrosiveness for the selection of cylinder valve
outlets (ISO 13338:2017)
Bouteilles à gaz - Gaz et mélanges de gaz - Gasflaschen - Gase und Gasgemische - Bestimmung der
Détermination de la corrosivité sur les tissus pour le Gewebekorrosivität von Gasen oder Gasgemischen für
choix des raccords de sortie de robinets (ISO die Auswahl von Ventilausgängen (ISO 13338:2017)
13338:2017)
This European Standard was approved by CEN on 28 September 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13338:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13338:2020
EN ISO 13338:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13338:2020
EN ISO 13338:2020 (E)
European foreword
The text of ISO 13338:2017 has been prepared by Technical Committee ISO/TC 58 "Gas cylinders” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 13338:2020
by Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by
BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 13338:2017 has been approved by CEN as EN ISO 13338:2020
...