EN 14353:2007
(Main)Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods
This European Standard specifies the characteristics and performance of metal beads, metal beads combined with paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards, gypsum boards with fibrous reinforcement and products from secondary processing complying with the ENs shown in Figure 2, intended to be used in building construction works. Metal beads and feature profiles, depending upon their material and type, can be featured without decoration, decorated or finished with jointing compounds to receive decoration.
It covers the following performance characteristics: reaction to fire and flexural strength (bending behaviour) to be measured according to the corresponding European test methods.
It provides for the evaluation of conformity of the product to this EN.
This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics.
Hilfs- und Zusatzprofile aus Metall zur Verwendung mit Gipsplatten - Begriffe, Anforderungen und Prüfverfahren
Diese Europäische Norm legt die Eigenschaften und Leistungen von Hilfsprofilen, mit Kartonstreifen kombinierten Hilfsprofilen sowie Zusatzprofilen aus Metall fest, die für die Verwendung in mit Gipsplatten, faserverstärkten Gipsplatten und Produkten aus der Weiterverarbeitung, entsprechend den im Bild 2 aufge¬listeten ENs, hergestellten, für den Einbau in Hochbauten vorgesehenen Bauteilen, bestimmt sind. Hilfs- und Zusatzprofile aus Metall können, abhängig von Material und Typ, sowohl mit als auch ohne Oberflächenend¬behandlung oder mit Fugenspachtel-Material eingespachtelt fertig zum Streichen oder Tapezieren, eingebaut werden.
Diese Norm behandelt die folgenden Leistungsmerkmale: Brandverhalten und Biegezugfestigkeit (Biegever¬halten), die mit den entsprechenden europäischen Prüfverfahren zu bestimmen sind.
Sie enthält Festlegungen zur Bewertung der Konformität der Produkte mit dieser EN.
Diese Europäische Norm behandelt auch zusätzliche technische Eigenschaften, die für die Anwendung und Akzeptanz des Produktes durch die Bauwirtschaft wichtig sind und enthält die Referenzprüfverfahren für diese Eigenschaften.
Cornières et profilés métalliques pour plaques de plâtre - Définitions, spécifications et méthodes d'essai
La présente Norme européenne spécifie les caractéristiques et les performances requises pour les cornières
métalliques, les cornières métalliques comportant des bandes de papier et les profilés métalliques destinés à
être utilisés dans les ouvrages en plaques de plâtre, plaques de plâtre armées de fibres et produits de
transformation secondaire, conformes aux normes européennes représentées en Figure 2, utilisés dans des
ouvrages de construction. Selon leur matériau de composition et leur type, les cornières et les profilés
métalliques peuvent être décorés ou non décorés ou revêtus par les enduits de joint avant décoration.
Elle couvre les caractéristiques de performance suivantes : réaction au feu et résistance à la flexion
(comportement en flexion) mesurées conformément aux méthodes d’essai européennes correspondantes.
La présente Norme européenne traite de l’évaluation de la conformité des produits à cette norme.
Elle couvre également les caractéristiques techniques supplémentaires qui sont importantes en vue de
l’utilisation et de l’acceptation du produit par l’industrie du bâtiment ainsi que les essais de référence de ces
caractéristiques.
Pomožni in dodatni kovinski profili za mavčne plošče - Definicije, zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methodsCornières et profilés métalliques pour plaques de plâtre - Définitions, spécifications et méthodes d'essaiHilfs- und Zusatzprofile aus Metall zur Verwendung mit Gipsplatten - Begriffe, Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14353:2007SIST EN 14353:2008en,fr,de91.100.10ICS:SLOVENSKI
STANDARDSIST EN 14353:200801-marec-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14353December 2007ICS 91.100.10 English VersionMetal beads and feature profiles for use with gypsumplasterboards - Definitions, requirements and test methodsCornières et profilés métalliques pour plaques de plâtre -Définitions, spécifications et méthodes d'essaiHilfs- und Zusatzprofile aus Metall zur Verwendung mitGipsplatten - Begriffe, Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 18 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14353:2007: E
Sampling procedure for testing.20 A.1 General.20 A.2 Sampling procedure.20 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.22 ZA.1 Scope and relevant characteristics.22 ZA.2 Procedure for attestation of conformity of metal beads and feature profiles.23 ZA.3 CE marking and labelling.25 Bibliography.27
Figure 1 — Family of gypsum products
Products from secondary processing Thermal/acoustic Composites EN 13950 Gypsum plasterboard products from reprocessing EN 14190 Prefabricated partition panels EN 13915 Ancillary products Gypsum based adhesives EN 14496 Preformed cornices EN 14209 Jointing materials EN 13963 Metal components EN 14195 Metal beads and feature profiles EN 14353 Mechanical fasteners EN 14566 Gypsum Plasterboard
EN 520 Gypsum boards with fibrous reinforcement EN 15283-1 and EN 15283-2 Figure 2 — Family of ancillary products 1 Scope This European Standard specifies the characteristics and performance of metal beads, metal beads combined with paper tape and metal feature profiles designed for use in systems made with gypsum plasterboards, gypsum boards with fibrous reinforcement and products from secondary processing complying with the ENs shown in Figure 2, intended to be used in building construction works. Metal beads and feature profiles, depending upon their material and type, can be featured without decoration, decorated or finished with jointing compounds to receive decoration. It covers the following performance characteristics: reaction to fire and flexural strength (bending behaviour) to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the product to this EN. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 520, Gypsum plasterboards — Definitions, requirements and test methods EN 755 (all parts), Aluminium and aluminium alloys — Extruded rod/bar, tube and profiles
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.