Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)

ISO 11151-2:2015 specifies requirements for laser components used from near-infrared to mid-infrared, from wavelengths 2,1 µm to 15,0 µm, and facilitates the supply of spare parts
by specifying preferred dimensions and tolerances, thereby reducing the variety of types,
by standardizing the specifications and removing barriers to trade, and
by establishing an agreed designation for item orders.
ISO 11151-2:2015 covers planar, plano-spherical, and spherical substrates, lenses, and optical components that are designed specifically as standardized optical components normally offered through a catalogue from suppliers and intended for use with lasers.
ISO 11151-2:2015 includes component descriptions, materials employed, physical dimensions, and manufacturing tolerances (including surface finish, figure, and parallelism). Although most, but not all of these components will be coated (fully reflecting, partially reflecting, or anti-reflecting) before incorporation into the laser system, ISO 11151-2:2015 does not include recommendations for the specification of coatings.

Laser und Laseranlagen - Optische Standardkomponenten - Teil 2: Komponenten für den infraroten Spektralbereich (ISO 11151-2:2015)

Dieser Teil von ISO 11151 legt Anforderungen an Laserkomponenten fest, die im nah-infraroten bis mittleren infraroten Spektralbereich von 2,40 µm bis 15,0 µm angewendet werden und erleichtert die Bereitstellung von Ersatzteilen durch:
   Festlegung von Vorzugsmaßen und Toleranzen, wodurch die Typenvielfalt verringert wird;
   Normung der Spezifikationen und Beseitigung von Handelsschranken;
   Aufstellung eines vereinbarten Bezeichnungssystems für Artikelbestellungen.
Dieser Teil von ISO 11151 umfasst plane, plansphärische und sphärische Substrate, Linsen und optische Komponenten, welche insbesondere als optische Standardkomponenten entworfen sind, üblicherweise in Katalogen angeboten werden und für den Gebrauch mit Lasern vorgesehen sind.
Dieser Teil von ISO 11151 schließt Beschreibungen von Komponenten, verwendete Werkstoffe, geometrische Maße und Fertigungstoleranzen (einschließlich Oberflächengüte, Flächenform und Parallelität) ein. Obwohl die meisten, wenn auch nicht alle, dieser Komponenten beschichtet werden (voll reflektierend, teilweise reflektierend oder reflexmindernd), bevor sie in das Lasersystem eingebaut werden, enthält dieser Teil von ISO 11151 keine Festlegungen für Beschichtungen.
ANMERKUNG 1   Für optische Komponenten, die im ultravioletten, sichtbaren und nah-infraroten Bereich verwendet werden (170 nm bis 2 100 nm), gilt ISO 11151 1. Zur Spezifikation und Prüfung von optischen Beschichtungen wird auf die Normen der Reihe ISO 9211 verwiesen.
ANMERKUNG 2   Die Festlegungen im Wellenlängenbereich um die 2,4 m sind in ISO 11151 1 und ISO 11151 2 ver-schieden, da in den beiden Teilen der Norm unterschiedliche Werkstoffe und Anwendungen betrachtet werden. Die Entscheidung, die Unterteilung zwischen den Teilen 1 und Teil 2 bei der Wellenlänge 2,4 m vorzunehmen, wurde getroffen, weil bei der Wellenlänge 2,4m die wenigsten Laseranwendungen existieren.

Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2: Composants pour la plage spectrale infrarouge (ISO 11151-2:2015)

L'ISO 11151-2:2015 spécifie les exigences pour les composants pour laser utilisés dans la plage spectrale infrarouge, pour les longueurs d'onde entre 2,1 µm et 15,0 µm, et vise à faciliter la fourniture de pièces détachées
en spécifiant des classes de dimensions et de tolérances préférentielles, d'où une réduction de la variété des types,
en normalisant les spécifications et en éliminant les entraves au commerce, et
en établissant une désignation agréée à des fins de commande.
L'ISO 11151-2:2015 couvre les substrats plans, plan-sphériques et sphériques, les lentilles et les composants optiques qui sont considérés spécifiquement comme des composants optiques normalisés, proposés dans les catalogues des fabricants et censés être utilisés avec des lasers.
L'ISO 11151-2:2015 concerne les descriptions de composants, les matériaux employés, les dimensions physiques et les tolérances de fabrication (y compris le traitement, la courbure et le parallélisme des surfaces). Bien que la plupart, mais non la totalité de ces composants, fassent l'objet d'un revêtement (totalement réfléchissant, partiellement réfléchissant ou anti-réfléchissant) avant leur incorporation au système laser, l'ISO 11151-2:2015 n'énonce aucune recommandation relative à la spécification des revêtements.

Laserji in laserska oprema - Standardne optične komponente - 2. del: Komponente za območje infrardečega spektra (ISO 11151-2:2015)

Ta del standarda ISO 11151 določa zahteve za laserske komponente, ki se uporabljajo za bližnje do srednje infrardeče območje od valovne dolžine 2,1 nm do 15,0 nm, in olajšuje dobavo rezervnih delov s/z:
– določanjem želenih mer in odstopanj, s čimer zmanjša raznovrstnost tipov;
– standardizacijo specifikacij in odstranitvijo trgovalnih ovir; in
– določitvijo dogovorjenih oznak za naročene izdelke.
Ta del standarda ISO 11151 zajema ravninske, ravninsko-sferične in sferične substrate, leče in optične
komponente, ki so posebej zasnovane kot standardizirane optične komponente,
ki jih prek katalogov običajno ponujajo dobavitelji, in so namenjene za uporabo z laserji.
Ta del standarda ISO 11151 zajema opise komponent, uporabljenih materialov, fizičnih mer in proizvodnih toleranc (vključno s površinsko obdelavo, obliko in primerljivostjo). Čeprav bo večina komponent, a ne vse, premazanih (povsem odbojno, delno odbojno ali protiodbojno) pred vgraditvijo v laserski sistem, ta del standarda ISO 11151 ne zajema priporočil za določanje premazov.
OPOMBA Optične komponente, ki se uporabljajo za območje UV ter vidno in bližnje infrardeče spektralno področje (170–2100 nm), so določene v standardu ISO 11151-1. Specifikacije in preskušanje optičnih premazov je opredeljeno v standardu ISO 9211 (vsi deli).

General Information

Status
Published
Publication Date
07-Jul-2015
Withdrawal Date
30-Jan-2016
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Jul-2015
Completion Date
08-Jul-2015

Relations

Buy Standard

Standard
EN ISO 11151-2:2015
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11151-2:2015
01-september-2015
1DGRPHãþD
SIST EN ISO 11151-2:2000
/DVHUMLLQODVHUVNDRSUHPD6WDQGDUGQHRSWLþQHNRPSRQHQWHGHO.RPSRQHQWH
]DREPRþMHLQIUDUGHþHJDVSHNWUD ,62
Lasers and laser-related equipment - Standard optical components - Part 2: Components
for the infrared spectral range (ISO 11151-2:2015)
Laser und Laseranlagen - Optische Standardkomponenten - Teil 2: Komponenten für
den infraroten Spektralbereich (ISO 11151-2:2015)
Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2:
Composants pour la plage spectrale infrarouge (ISO 11151-2:2015)
Ta slovenski standard je istoveten z: EN ISO 11151-2:2015
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN ISO 11151-2:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11151-2:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 11151-2:2015

EUROPEAN STANDARD
EN ISO 11151-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2015
ICS 31.260 Supersedes EN ISO 11151-2:2000
English Version
Lasers and laser-related equipment - Standard optical
components - Part 2: Components for the infrared spectral range
(ISO 11151-2:2015)
Lasers et équipements associés aux lasers - Composants Laser und Laseranlagen - Optische Standardkomponenten
optiques standards - Partie 2: Composants pour la plage - Teil 2: Komponenten für den infraroten Spektralbereich
spectrale infrarouge (ISO 11151-2:2015) (ISO 11151-3:2015)
This European Standard was approved by CEN on 21 February 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11151-2:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11151-2:2015
EN ISO 11151-2:2015 (E)
Contents Page
European foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11151-2:2015
EN ISO 11151-2:2015 (E)
European foreword
This document (EN ISO 11151-2:2015) has been prepared by Technical Committee ISO/TC 172 "Optics and
photonics" in collaboration with Technical Committee CEN/TC 123 “Lasers and photonics” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at
the latest by January 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11151-2:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11151-2:2015 has been approved by CEN as EN ISO 11151-2:2015 without any modification.
3

---------------------- Page: 5 ---
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.