EN 1007-5:2010
(Main)Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
This European Standard specifies the conditions, apparatus and procedure for determining the distribution of tensile strength and tensile strain to failure of ceramic filaments in multifilament tows at ambient temperature.
This European Standard applies to tows of continuous ceramic filaments, which are assumed to act freely and independently under loading, and behave linearly elastic up to failure.
Hochleistungskeramik - Keramische Verbundwerkstoffe - Verfahren zur Prüfung der Faserverstärkungen - Teil 5: Bestimmung der Verteilung von Zugfestigkeit und Zugdehnung von Fasern im Faserbündel bei Raumtemperatur
Diese Europäische Norm legt die Bedingungen, Geräte und Verfahren zur Bestimmung der Verteilung der Zugfestigkeit und der Bruchdehnung von keramischen Fasern innerhalb eines Faserbündels bei Raum-temperatur fest.
Diese Europäische Norm gilt für Bündel keramischer Endlosfasern, von denen angenommen wird, dass sie unter Beanspruchung frei und unabhängig sind und sich bis zum Bruch linear elastisch verhalten.
Céramiques techniques avancées - Céramiques composites - Méthodes d'essais pour renforts - Partie 5: Détermination de la distribution de la résistance en traction et de la déformation de traction à la rupture des filaments dans un fil à température ambiante
La présente Norme européenne spécifie les conditions, appareillages et méthodes de détermination de la distribution de la résistance à la traction et de la déformation en traction à la rupture des filaments céramiques dans un fil multifilaments à température ambiante.
Elle s’applique aux fils constitués de filaments continus de céramique qui sont supposés agir librement et indépendamment les uns des autres lorsqu’ils sont soumis à une charge, et présenter un comportement élastique linéaire jusqu’à la rupture.
Sodobna tehnična keramika - Keramični kompoziti - Preskusne metode za ojačitve - 5. del: Ugotavljanje porazdelitve natezne trdnosti in deformacij/obremenitev vlaken v svežnjih pri visoki temperaturi
Ta evropski standard določa pogoje, aparat in postopek za ugotavljanje porazdelitve natezne trdnosti in deformacij/obremenitve vlaken v svežnjih
pri visoki temperaturi. Ta evropski standard velja za svežnje neprekinjenih keramičnih vlaken, za katere se predpostavlja, da pod obremenitvijo delujejo prosto in neodvisno ter so do deformacije linearno elastične.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.MREUHPHQLWHYHochleistungskeramik - Keramische Verbundwerkstoffe - Verfahren zur Prüfung der Faserverstärkungen - Teil 5: Bestimmung der Verteilung von Zugfestigkeit und Zugdehnung von Fasern im Faserbündel bei RaumtemperaturCéramiques techniques avancées - Céramiques composites - Méthodes d'essais pour renforts - Partie 5: Détermination de la distribution de la résistance en traction et de la déformation de traction à la rupture des filaments dans un fil à température ambianteAdvanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature81.060.30Sodobna keramikaAdvanced ceramicsICS:Ta slovenski standard je istoveten z:EN 1007-5:2010SIST EN 1007-5:2010en,fr,de01-maj-2010SIST EN 1007-5:2010SLOVENSKI
STANDARDSIST EN 1007-5:20041DGRPHãþD
SIST EN 1007-5:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1007-5
March 2010 ICS 81.060.30 Supersedes EN 1007-5:2003English Version
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
Céramiques techniques avancées - Céramiques composites - Méthodes d'essais pour renforts - Partie 5: Détermination de la distribution de la résistance en traction et de la déformation de traction à la rupture des filaments dans un fil à température ambiante
Hochleistungskeramik - Keramische Verbundwerkstoffe - Verfahren zur Prüfung der Faserverstärkungen - Teil 5: Bestimmung der Verteilung von Zugfestigkeit und Zugdehnung von Fasern im Faserbündel bei Raumtemperatur This European Standard was approved by CEN on 13 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1007-5:2010: ESIST EN 1007-5:2010
EN 1007-5:2010 (E) 2 Contents page Foreword . 31Scope . 42Normative references . 43Terms and definitions . 44Principle . 65Significance and use . 66Apparatus . 66.1Tensile testing equipment . 66.2Load train . 66.3Data recording . 77Test specimens .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.