EN ISO 22459:2022

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 22459:2020)

This document specifies the conditions for the determination of the distribution of strength and rupture strain of ceramic filaments within a multifilament tow at room temperature by performing a tensile test on a multifilament tow.
This document applies to dry tows of continuous ceramic filaments that are assumed to act freely and independently under loading and exhibit linear elastic behaviour up to failure. The outputs of this method are not to be mixed up with the strengths of embedded tows determined by using ISO 24046[1].
[1] Under preparation.

Hochleistungskeramik - Faserverstärkungen von keramischen Verbundwerkstoffen - Bestimmung der Verteilung von Zugfestigkeit und Zugdehnung bis zum Versagen von Filamenten innerhalb eines Multifilamentkabels bei Raumtemperatur (ISO 22459:2020)

Dieses Dokument legt die Bedingungen für die Bestimmung der Verteilung von Festigkeit und Bruchdehnung von Fasern innerhalb eines Faserbündels bei Raumtemperatur fest, indem ein Zugversuch an einem Faser¬bündel durchgeführt wird.
Dieses Dokument gilt für unbeschichtete Faserbündel aus keramischen Endlosfasern, von denen angeno-mmen wird, dass sie sich unter Beanspruchung frei und unabhängig verhalten und bis zum Bruch ein linear-elastisches Verhalten zeigen. Die Ergebnisse dieses Verfahrens sind nicht mit den Festigkeitswerten von eingebetteten Faserbündeln zu verwechseln, die mithilfe von ISO 24046  bestimmt wurden.

Céramiques techniques - Renfort de céramiques composites - Détermination de la distribution de la résistance en traction et de la déformation à la rupture en traction de filaments dans un fil multifilamentaire à température ambiante (ISO 22459:2020)

Le présent document spécifie les conditions de détermination de la distribution de la résistance et de la déformation à la rupture de filaments céramiques dans un fil multifilamentaire à température ambiante, en réalisant un essai de traction sur un fil multifilamentaire.
Ce document s'applique aux fils secs de filaments céramiques continus qui sont supposés se comporter librement et indépendamment sous charge et avoir un comportement linéaire élastique jusqu'à la rupture. Il ne faut pas confondre les résultats de cette méthode avec les résistances de fils imprégnés déterminées à l'aide de l'ISO 24046[1].
[1] En cours d?élaboration.

Fina keramika (sodobna keramika, sodobna tehnična keramika) - Ojačitev keramičnih kompozitov - Ugotavljanje porazdelitve natezne trdnosti in deformacij/obremenitev vlaken v svežnjih pri temperaturi okolice (ISO 22459:2020)

Ta dokument določa pogoje za ugotavljanje porazdelitve trdnosti in deformacij/obremenitev keramičnih vlaken v svežnjih pri temperaturi okolice z izvedbo nateznega preskusa na svežnju.
Ta dokument se uporablja za suhe svežnje neprekinjenih keramičnih vlaken, za katere se domneva, da delujejo prosto in neodvisno pod obremenitvijo ter izkazujejo linearno elastično obnašanje do pretrganja. Rezultati te metode se ne smejo zamešati s trdnostmi vdelanih svežnjev, določenih v standardu ISO 24046 [1].

General Information

• Status: Published
• Publication Date: 19-Apr-2022
• Withdrawal Date: 30-Oct-2022
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184/SC 1 - Ceramic composites
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Apr-2022
• Completion Date: 20-Apr-2022
• Ref Project: SIST EN ISO 22459:2022 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 22459:2020)

Relations

• Replaces: EN 1007-5:2010 - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
• Effective Date: 27-Apr-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 22459:2022
01-junij-2022
Nadomešča:
SIST EN 1007-5:2010
Fina keramika (sodobna keramika, sodobna tehnična keramika) - Ojačitev
keramičnih kompozitov - Ugotavljanje porazdelitve natezne trdnosti in
deformacij/obremenitev vlaken v svežnjih pri temperaturi okolice (ISO 22459:2020)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of
ceramic composites - Determination of distribution of tensile strength and tensile strain to
failure of filaments within a multifilament tow at ambient temperature (ISO 22459:2020)
Hochleistungskeramik - Faserverstärkungen von keramischen Verbundwerkstoffen -
Bestimmung der Verteilung von Zugfestigkeit und Zugdehnung bis zum Versagen von
Filamenten innerhalb eines Multifilamentkabels bei Raumtemperatur (ISO 22459:2020)
Céramiques techniques - Renfort de céramiques composites - Détermination de la
distribution de la résistance en traction et de la déformation à la rupture en traction de
filaments dans un fil multifilamentaire à température ambiante (ISO 22459:2020)
Ta slovenski standard je istoveten z: EN ISO 22459:2022
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 22459:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 22459:2022

---------------------- Page: 2 ----------------------
SIST EN ISO 22459:2022


EN ISO 22459
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2022
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN 1007-5:2010
English Version

Fine ceramics (advanced ceramics, advanced technical
ceramics) - Reinforcement of ceramic composites -
Determination of distribution of tensile strength and
tensile strain to failure of filaments within a multifilament
tow at ambient temperature (ISO 22459:2020)
Céramiques techniques - Renfort de céramiques Hochleistungskeramik - Faserverstärkungen von
composites - Détermination de la distribution de la keramischen Verbundwerkstoffen - Bestimmung der
résistance en traction et de la déformation à la rupture Verteilung von Zugfestigkeit und Zugdehnung bis zum
en traction de filaments dans un fil multifilamentaire à Versagen von Filamenten innerhalb eines
température ambiante (ISO 22459:2020) Multifilamentkabels bei Raumtemperatur (ISO
22459:2020)
This European Standard was approved by CEN on 27 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22459:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 22459:2022
EN ISO 22459:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 22459:2022
EN ISO 22459:2022 (E)
European foreword
The text of ISO 22459:2020 has been prepared by Technical Committee ISO/TC 206 "Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 22459:2022
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be h
...