Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells

This European Standard specifies the method for the strength calculation of the shell with respect to internal pressure of the valve.

Industriearmaturen - Gehäusefestigkeit - Teil 2: Berechnungsverfahren für drucktragende Gehäuse von Armaturen aus Stahl

Diese Europäische Norm legt das Verfahren zur Berechnung der Festigkeit des drucktragenden Gehäuses gegen den Innendruck der Armatur fest.

Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 2 : Méthode de calcul relative aux enveloppes d'appareils de robinetterie en acier

La présente norme Européenne spécifie la méthode de calcul de la résistance de l'enveloppe par rapport à la pression intérieure de l’appareil de robinetterie.

Industrijski ventili - Trdnost ohišja - 2. del: Metoda za izračun ohišij jeklenih ventilov

Ta del standarda EN 12516 določa metodo za izračun trdnosti ohišja glede na notranji tlak ventila.

General Information

Status
Withdrawn
Publication Date
28-Oct-2014
Withdrawal Date
26-Oct-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
27-Oct-2021

Relations

Buy Standard

Standard
EN 12516-2:2015
English language
99 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YHQWLORYIndustriearmaturen - Gehäusefestigkeit - Teil 2: Berechnungsverfahren für drucktragende Gehäuse von Armaturen aus StahlRobinetterie industrielle - Résistance mécanique des enveloppes - Partie 2 : Méthode de calcul relative aux en-veloppes d'appareils de robinetterie en acierIndustrial valves - Shell design strength - Part 2: Calculation method for steel valve shells23.060.01Ventili na splošnoValves in generalICS:Ta slovenski standard je istoveten z:EN 12516-2:2014SIST EN 12516-2:2015en,fr,de01-januar-2015SIST EN 12516-2:2015SLOVENSKI
STANDARDSIST EN 12516-2:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12516-2
October 2014 ICS 23.060.01 Supersedes EN 12516-2:2004English Version
Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
Robinetterie industrielle - Résistance mécanique des enveloppes - Partie 2 : Méthode de calcul relative aux enveloppes d'appareils de robinetterie en acier
Industriearmaturen - Gehäusefestigkeit - Teil 2: Berechnungsverfahren für drucktragende Gehäuse von Armaturen aus Stahl This European Standard was approved by CEN on 9 August 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12516-2:2014 ESIST EN 12516-2:2015

Characteristic values of gaskets and joints . 84 Annex B (informative)
Calculation procedure . 96 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC . 98 Bibliography . 99
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.