Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO/TS 16410-2:2012)

ISO/TS 16410-2:2011 specifies the Abstract Test Suite (ATS) to evaluate the conformity of Front End and Back End to ISO/TS 17575-3.

Elektronische Gebührenerhebung - Konformitätsevaluierung von Einrichtungen nach ISO/TS 17575-3 - Teil 2: Abstrakte Prüfreihe (ISO/TS 16410-2:2012)

Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO/TS 17575-3 - Partie 2: Suite d'essais abstraite (ISO/TS 16410-2:2012)

Elektronsko pobiranje pristojbin - Ugotavljanje skladnosti opreme s tehnično specifikacijo ISO/TS 17575-3 - 2. del: Abstraktni preskuševalni niz (ISO 16410-2:2012)

Standard bo določil preskuševalni niz za ugotavljanje skladnosti opreme s standardom za elektronsko pobiranje pristojbin z naslovom »Definicija aplikacijskega vmesnika za avtonomne sisteme – Cestninjenje« (tj. CEN ISO/TS 17575 – del 3). Zajemal bo preskuse za zaledno in čelno (kot proxy ali pametni odjemalec OBE) opremo.
Standard za preskuse skladnosti bo omogočil primerljivost rezultatov preskusov, ki bodo izvedeni na različnih krajih in v različnih časovnih obdobjih ter olajšal komunikacijo med različnimi stranmi. Standard bo sestavljen iz dveh delov. Področje uporabe drugega dela, tj. tega dela, bo zajemalo abstraktni preskuševalni niz.
Abstraktni preskuševalni niz bo temeljil na preskusnem skriptnem jeziku TTCN, ki je primeren za uporabo v računalniško podprtem preskusnem orodju. TTCN je razširjen poseben preskusni programski jezik za preskušanje skladnosti (http://www.ttcn-3.org).

General Information

Status
Withdrawn
Publication Date
29-Feb-2012
Withdrawal Date
11-Dec-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Dec-2018

RELATIONS

Buy Standard

Technical specification
-TS CEN ISO TS 16410-2:2012 - BARVE na pdf strani 15
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 16410-2:2012
01-maj-2012
(OHNWURQVNRSRELUDQMHSULVWRMELQ8JRWDYOMDQMHVNODGQRVWLRSUHPHVWHKQLþQR
VSHFLILNDFLMR,6276GHO$EVWUDNWQLSUHVNXãHYDOQLQL] ,62


Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 -

Part 2: Abstract test suite (ISO 16410-2:2012)
Elektronische Gebührenerhebung - Konformitätsevaluierung von Einrichtungen nach
CEN ISO/TS 17575-3 - Teil 2: Abstrakte Prüfreihe (ISO 16410-2:2012)

Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO/TS 17575-

3 - Partie 2: Suite d'essais abstraite (ISO 16410-2:2012)
Ta slovenski standard je istoveten z: CEN ISO/TS 16410-2:2012
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN ISO/TS 16410-2:2012 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
TECHNICAL SPECIFICATION
CEN ISO/TS 16410-2
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
March 2012
ICS 35.240.60; 03.220.20
English Version
Electronic fee collection - Evaluation of equipment for conformity
to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO 16410-
2:2012)

Perception du télépéage - Évaluation de la conformité de Elektronische Gebührenerhebung -

l'équipement à l'ISO/TS 17575-3 - Partie 2: Suite d'essais Konformitätsevaluierung von Einrichtungen nach CEN

abstraite (ISO 16410-2:2012) ISO/TS 17575-3 - Teil 2: Abstrakte Prüfreihe (ISO 16410-

2:2012)

This Technical Specification (CEN/TS) was approved by CEN on 30 January 2012 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their

comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available

promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)

until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 16410-2:2012: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
CEN ISO/TS 16410-2:2012 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
CEN ISO/TS 16410-2:2012 (E)
Foreword

This document (CEN ISO/TS 16410-2:2012) has been prepared by Technical Committee CEN/TC 278 “Road

transport and traffic telematics", the secretariat of which is held by NEN, in collaboration with Technical

Committee ISO/TC 204 "Intelligent transport systems".

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,

Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,

Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, Switzerland, Turkey and the United Kingdom.
---------------------- Page: 5 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
---------------------- Page: 6 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
TECHNICAL ISO/TS
SPECIFICATION 16410-2
First edition
2012-03-01
Electronic fee collection — Evaluation of
equipment for conformity to
ISO/TS 17575-3 —
Part 2:
Abstract test suite
Perception du télépéage — Évaluation de la conformité de l'équipement
à l'ISO/TS 17575-3 —
Partie 2: Suite d'essais abstraite
Reference number
ISO/TS 16410-2:2012(E)
ISO 2012
---------------------- Page: 7 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
ISO/TS 16410-2:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
ISO/TS 16410-2:2012(E)
Contents Page

Foreword ............................................................................................................................................................ iv

Introduction ......................................................................................................................................................... v

1  Scope ...................................................................................................................................................... 1

2  Normative references ............................................................................................................................ 1

3  Terms and definitions ........................................................................................................................... 1

4  Abbreviations ......................................................................................................................................... 2

5  Abstract Test Method (ATM) ................................................................................................................ 2

5.1  Implementations Under Tests .............................................................................................................. 2

5.1.1  Front-End (FE) ....................................................................................................................................... 2

5.1.2  Back-End (BE) ........................................................................................................................................ 2

5.2  Test architecture .................................................................................................................................... 2

5.3  Protocol Implementation Extra Information for Testing (PIXIT) ....................................................... 3

6  Untestable Test Purposes (TP) ............................................................................................................ 3

7  ATS data structures .............................................................................................................................. 3

7.1  ASN.1 description .................................................................................................................................. 3

8  External functions ................................................................................................................................. 4

8.1  Functions for communications ............................................................................................................ 4

9  Message filtering ................................................................................................................................... 4

10  ATS naming conventions ..................................................................................................................... 4

10.1  Definition naming conventions ............................................................................................................ 5

10.2  Test Case identifier ............................................................................................................................... 6

10.3  TTCN-3 modules identifier .................................................................................................................... 6

Annex A (normative) TTCN-3 Library modules for FE and BE ....................................................................... 8

Annex B (informative) PIXIT proforma for FE and BE ..................................................................................... 9

Bibliography ...................................................................................................................................................... 12

© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
ISO/TS 16410-2:2012(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

In other circumstances, particularly when there is an urgent market requirement for such documents, a

technical committee may decide to publish other types of document:

— an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in

an ISO working group and is accepted for publication if it is approved by more than 50 % of the members

of the parent committee casting a vote;

— an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical

committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting

a vote.

An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a

further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is

confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an

International Standard or be withdrawn.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO/TS 16410-2 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in

collaboration with Technical Committee CEN/TC 278, Road transport and traffic telematics.

ISO/TS 16410 consists of the following parts, under the general title Electronic fee collection — Evaluation of

equipment for conformity to ISO/TS 17575-3:
— Part 1: Test suite structure and test purposes
— Part 2: Abstract test suite
iv © ISO 2012 – All rights reserved
---------------------- Page: 10 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
ISO/TS 16410-2:2012(E)
Introduction

This part of ISO/TS 16410 is part of a set of standards that supports interoperability of autonomous EFC-

systems, which includes ISO/TS 17575 parts 1 to 4 that define the EFC context data, their charge reports and

their use of communication infrastructure.

Within the suite of EFC standards this conformance evaluation procedure defines the process and tests for

conformity evaluation of Front End and Back End that comply with the requirements in ISO/TS 17575-3.

This part of ISO/TS 16410 is intended to
 assess Front End and Back End capabilities,
 assess Front End and Back End behaviour,

 serve as a guide for Front End and Back End conformance evaluation and type approval,

 achieve comparability between the results of the corresponding tests applied in different places at

different times, and
 facilitate communications between parties.
This part of ISO/TS 16410 is based on
 ISO/TS 17575-3, and
 the ISO/IEC 9646 family of standards on conformance test methodology.
© ISO 2012 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
---------------------- Page: 12 ----------------------
SIST-TS CEN ISO/TS 16410-2:2012
TECHNICAL SPECIFICATION ISO/TS 16410-2:2012(E)
Electronic fee collection — Evaluation of equipment for
conformity to ISO/TS 17575-3 —
Part 2:
Abstract test suite
1 Scope

This part of ISO/TS 16410 specifies the Abstract Test Suite (ATS) to evaluate the conformity of Front End and

Back End to ISO/TS 17575-3.

The objective of this part of ISO/TS 16410 is to provide a basis for conformance tests for the Front End and

the Back End in Electronic Fee Collection to enable interoperability between different equipment supplied by

different manufacturers.
The present abstract test suite is directly derived from ISO/TS 17575-1.
2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

ISO/TS 17575-1:2010, Electronic fee collection — Application interface definition for autonomous systems —

Part 1: Charging
ISO/TS 17575-2, Electronic fee collection — Applicatio
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.