prEN ISO 22418

Intelligent transport systems - Fast service announcement protocol (FSAP) (ISO 22418:2018)

This document specifies the "Fast Service Announcement Protocol" (FSAP).
FSAP is in support of locally advertised ITS services uniquely identified by an ITS application identifier (ITS-AID).
This document specifies message formats and related basic protocol procedures by reference to ISO/TS 16460:2016, and further related protocol requirements for operation of FSAP in the context of an ITS station specified in ISO 21217:2014.

Systèmes de transport intelligents - Protocole d'annonce de service rapide (FSAP) (ISO 22418:2018)

Inteligentni transportni sistemi - Protokol objave hitre storitve (FSAP) (ISO 22418:2018)

General Information

• Status: Not Published
• Publication Date: 12-Jul-2020
• ICS: 03.220.01 - Transport in general
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 16 - Co-operative systems
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 01-Mar-2019
• Directive: 2010/40/EU - Directive 2010/40/EU of the European Parliament and of the Council of 7 July 2010 on the framework for the deployment of Intelligent Transport Systems in the field of road transport and for interfaces with other modes of transport Text with EEA relevance
• Mandate: M/453 - Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of information and communication technologies to support the interoperability of co-operative for intelligent transport in the european community
• Mandate: M/456 - Mandate to CEN for the development of European standards to establish the petrol vapour recovery efficiency of new Stage II petrol vapour recovery equipment and the in-use performance of such equipment once installed at service stations.
• Mandate: M/546 - [C(2016)808 Urban ITS (Intelligent Transport Systems in the field of road transport and for interfaces with other modes of transport)
• Ref Project: oSIST prEN ISO 22418:2019 - Intelligent transport systems - Fast service announcement protocol (FSAP) (ISO 22418:2018)

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2019
Inteligentni transportni sistemi - Protokol objave hitre storitve (FSAP) (ISO
22418:2018)
Intelligent transport systems - Fast service announcement protocol (FSAP) (ISO
22418:2018)
Systèmes de transport intelligents - Protocole d'annonce de service rapide (FSAP) (ISO
22418:2018)
Ta slovenski standard je istoveten z: prEN ISO 22418
ICS:
03.220.01 Transport na splošno Transport in general
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 22418
First edition
2018-06
Intelligent transport systems — Fast
service announcement protocol (FSAP)
Systèmes de transport intelligents — Protocole d'annonce de service
rapide (FSAP)
Reference number
ISO 22418:2018(E)
©
ISO 2018
ISO 22418:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 22418:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 2
5 General requirements . 2
6 Architecture . 4
6.1 ITS communications architecture . 4
6.2 Implementation architecture . 4
6.3 Communication roles and entities . 4
6.4 Communication phases . 5
6.4.1 Overview . 5
6.4.2 Service initialization phase . 5
6.4.3 Service operation phase . 8
6.5 Advertised services . 8
6.6 FSAP reference architecture . 9
7 Protocol elements .10
7.1 Management service access points .10
7.2 Protocol data units .10
7.2.1 General.10
7.2.2 Fast service advertisement message .11
7.2.3 Fast service response message .11
7.2.4 Secured messages .11
7.2.5 Request and response messages .12
7.3 Port numbers .12
7.4 ITS application object identifier . .12
8 Protocol procedures .12
8.1 General .12
8.1.1 FSAP communication handler procedures .12
8.1.2 FSAP manager procedures .13
8.1.3 Extension elements .13
8.2 Service provider .14
8.2.1 FSAP registration .14
8.2.2 FSAP registration update .15
8.2.3 FSAP deregistration . .17
8.2.4 FSAP communication management.18
8.2.5 Transmission of FSAM . . .21
8.2.6 Reception of FSRM .21
8.3 Service user .24
8.3.1 FSAP registration .24
8.3.2 FSAP registration update .25
8.3.3 FSAP deregistration . .25
8.3.4 Reception of FSAM .26
8.4 Service operation phase .30
8.5 ITS station-internal management communications .31
8.6 Duplicate service detection .31
8.7 System Service .31
8.7.1 General.31
8.7.2 Mandatory applications .31
9 Optionally supported features .32
ISO 22418:2018(E)
10 Conformance .32
11 Test methods .32
Annex A (normative) ASN.1 modules .33
Annex B (normative) Support of application requirements for communications.41
Annex C (normative) Support of path and flow management .43
Annex D (normative) Implementation conformance statement .44
Bibliography .55
iv © ISO 2018 – All rights reserved

ISO 22418:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT)
...