EN 13763-25:2004

Explosives for civil uses - Detonators and relays - Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories

This European Standard specifies a method for determining the transfer capacity of transfer connector and coupling accessory intended for non-electric initiation systems.

Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 25: Bestimmung des Übertragungsvermögens von Oberflächenverbindern, Verzögerern und Verbindern

Diese Europäische Norm legt Verfahren für die Bestimmung des Übertragungsvermögens von Oberflächenverbindern, Verzögerern und Verbindern für den Einsatz in nichtelektrischen Zündsystemen fest.

Explosifs à usage civil - Détonateurs et relais - Partie 25 : Détermination de la capacité de transmission des relais et des manchons d'accouplement

La présente Norme européenne décrit une méthode de détermination de la capacité de transmission des connecteurs de surface, des relais et des manchons d'accouplement destinés aux systèmes d'amorçage non électriques.

Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 25. del: Ugotavljanje prenosne zmogljivosti površinskih konektorjev, zakasnilnikov in spojnih elementov

General Information

• Status: Published
• Publication Date: 04-May-2004
• Withdrawal Date: 29-Nov-2004
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jul-2015
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13763-25:2004 - Explosives for civil uses - Detonators and relays - Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories

Relations

• Revised: FprEN 13763-25 - Explosives for civil uses - Detonators and detonating cord relays - Part 25: Verification of transfer capability of detonating cord relays, surface connectors and coupling accessories
• Effective Date: 23-Oct-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 25. del: Ugotavljanje prenosne zmogljivosti površinskih konektorjev, zakasnilnikov in spojnih elementovLQGHUQExplosifs a usage civil - Détonateurs et relais - Partie 25:
Détermination de la capacité de transmission des relais et des manchonsExplosives for civil uses - Detonators and relays - Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:Ta slovenski standard je istoveten z:EN 13763-25:2004SIST EN 13763-25:2004en01-september-2004SIST EN 13763-25:2004SLOVENSKI
STANDARD







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13763-25May 2004ICS 71.100.30English versionExplosives for civil uses - Detonators and relays - Part 25:Determination of transfer capability of surface connectors, relaysand coupling accessoriesExplosifs à usage civil - Détonateurs et relais - Partie 25: Détermination de la capacité de transmission des relais etdes manchonsExplosivstoffe für zivile Zwecke - Zünder undVerzögerungselemente - Teil 25: Bestimmung desÜbertragungsvermögens von Oberflächenverbindern,Verzögerern und VerbindernThis European Standard was approved by CEN on 2 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13763-25:2004: E



EN 13763-25:2004 (E)2ContentspageForeword.3Introduction.51Scope.62Normative references.63Terms and definitions.64Test pieces.65Apparatus.66Procedure.67Test report.7Annex A (informative)
Range of applicability of the test method.8Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.9



EN 13763-25:2004 (E)3ForewordThis document (EN 13763-25:2004) has been prepared by Technical Committee CEN /TC 321, "Explosives for civiluses", the secretariat of which is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2004,and conflicting national standards shall be withdrawn at the latestby November 2004.This document has been prepared under a mandate
...