iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12085:1997

(Main)

Thermal insulating products for building applications - Determination of linear dimensions of test specimens

Thermal insulating products for building applications - Determination of linear dimensions of test specimens

This European Standard specifies the characteristics and choice of measuring equipment and the procedure for determining of the linear dimensions of test specimens which are taken from thermal insulating products. The procedures for measuring the dimensions of full size products are specified in EN 822 and EN 823.

Wärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von Probekörpern

Diese Norm legt die Leistungsmerkmale und die Auswahl von Meßeinrichtungen und das Verfahren zur Bestimmung der linearen Maße von Probekörpern, die aus einem Produkt entnommen wurden, fest. Sie gilt für Wärmedämmstoffe. Die Verfahren zur Bestimmung der Maße von Produkten in Liefermaßen sind in EN 822 und EN 823 beschrieben.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes d'essai

Cette norme européenne spécifie les caractéristiques et le choix du matériel de mesurage, ainsi que le mode opératoire servant à déterminer les dimensions linéaires des éprouvettes prélevées sur les produits isolants thermiques. Les modes opératoires pour mesurer les dimensions d'origine des produits sont d définis par EN 822 et EN 823.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu – Določanje linearnih dimenzij preskušancev

General Information

Status
Withdrawn
Publication Date
17-Jun-1997
Withdrawal Date
12-Mar-2013
ICS
91.100.99 - Other construction materials
Technical Committee
CEN/TC 88 - Thermal insulating materials and products
Drafting Committee
CEN/TC 88/WG 1 - Common general test methods
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Mar-2013
Completion Date
13-Mar-2013
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
Ref Project
SIST EN 12085:1999 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens

Relations

Replaced By
EN 12085:2013 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens
Effective Date
21-Dec-2011

Buy Standard

EN 12085:1999EN 12085:1999
PreviousNext
Standard
EN 12085:1999
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von ProbekörpernProduits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes d'essaiThermal insulating products for building applications - Determination of linear dimensions
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 824:2013(Main)
Thermal insulating products for building applications - Determination of squareness
SIST EN 824:2013

This European Standard specifies the equipment and procedure for determining the deviation from squareness for length, width and/or thickness of full-size products. It is applicable to thermal insulating products. The method is normally applicable to products with straight edges. For products of other shape, e.g. profiled edges, the method can be adapted accordingly.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12086:2013(Main)
Thermal insulating products for building applications - Determination of water vapour transmission properties
SIST EN 12086:2013

This European Standard specifies the equipment and procedures for determining the water vapour transmission rate, water vapour permeance and water vapour permeability of test specimens in the steady state under different sets of specified test conditions. It is applicable to thermal insulating products.
It is intended to be used for homogeneous materials and for products which may contain integral skins or facings of different material(s).
A material is considered to be homogeneous, with regard to mass distribution, if its density is approximately the same throughout, i.e. if the measured density values are close to its mean density.
This test method is not normally used for determining the water vapour transmission properties of single, separate vapour barriers (of high diffusion resistance), such as prefabricated films, foils, membranes or sheets, due to the long duration of the test. For products with a vapour retarder or barrier with a water vapour diffusion equivalent air layer thickness sd  1 000 m (see 3.6) other test methods e.g. IR-detection can be used for measuring the single separate vapour retarder or barrier, provided that the results obtained are in the same range as the values measured in accordance with this standard.
The water vapour transmission rate and permeance values are specific to the test specimen (i.e. the product) thickness tested. For homogeneous products, the water vapour permeability is a property of the material.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12430:2013(Main)
Thermal insulating products for building applications - Determination of behaviour under point load
SIST EN 12430:2013

This European Standard specifies equipment and procedures for determining the behaviour of products under a force applied to a small area of a test specimen at a given speed. It is applicable to thermal insulating products.
This European Standard can be used to determine whether the products have sufficient strength to withstand forces applied directly to them either during installation or during application, mainly caused by pedestrian traffic.
NOTE   The test methods given in the main body of the standard and in Annex A are reported and interpreted in different ways. The similarities that exist between the methods are not sufficient to permit reasonable comparisons to be made.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12089:2013(Main)
Thermal insulating products for building applications - Determination of bending behaviour
SIST EN 12089:2013

This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products.
The test is designed to determine the bending strength of products and their deflection at a given load.
The method can be used to determine the resistance of the product to bending stresses during transport and application.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12090:2013(Main)
Thermal insulating products for building applications - Determination of shear behaviour
SIST EN 12090:2013

This European Standard specifies the equipment and procedures for determining shear behaviour. It is applicable to thermal insulating products.
NOTE   The tests described in this standard do not determine pure shear behaviour, but measure the effects of applying two opposite parallel forces to the major faces of the test specimen. The test is however called shear in this text by convention. The application of a force tangentially to the major surface of the test specimen is considered to represent more closely the stresses imposed upon thermal insulation products in many building applications, particularly walls, than other methods of measuring shear performance e.g. bending tests.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12429:1998(Main)
Thermal insulating products for building applications - Conditioning to moisture equilibrium under specified temperature and humidity conditions
SIST EN 12429:1999

This European standard specifies equipment and procedures to condition a thermal insulating product to equilibrium moisture content at (23+/-2)°C and (50+/-5)% relative humidity. The standard is also applicable to thermal insulating products with moulded skins but is not normally relevant for faced products or for products with other surface treatments.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1279-2:2018(Main)
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
SIST EN 1279-2:2018

This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16566:2014(Main)
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
SIST EN 16566:2014

This European Standard defines coating materials designed to cover all backgrounds and substrates in traditional materials or compliant with the standards in force, whether new or existing, bare or coated, absorbent or non-absorbent, smooth or rough, in order to prepare them to receive a paint or related system, or a bonded cover, whether specific or not. More generally intended to improve the surface appearance, they can also:
-   not be over-coated;
-   create a textured appearance or not;
-   be treated/coloured or not (pigments, wax, etc.).
Exterior fillers are not intended as top coat.
Interior coating materials with grain size over 1 mm are not covered by this European Standard.
Fillers specifically intended for wooden and metal substrates are not covered by this European Standard.
This European Standard complies with the general system for classification of water-borne coating materials and coating systems for interior walls and ceilings described in EN 13300.
This European Standard complies with the general system for the description of coating materials and coating systems for exterior masonry and concrete described in EN 1062 1.
The essential function of fillers is therefore a decorative function. Therefore, these fillers are considered here as preparatory and/or decorative fillers, of smooth or textured appearance.
NOTE   Nothing prevents preparatory surface filler from being coated with a paint system comprising protective functions.
However, they are not suitable for truing of backgrounds, without specifications regarding the verticality, angularity or flatness under a 2-m straight edge, or thickness. Their application never requires, to ensure they bond correctly, the prior application of a rigid reinforcement such as a lathwork or wire mesh, or a spatter-dash or bagging or scoring of the surface between two coats. They may nevertheless incorporate a flexible reinforcement (strip of natural or synthetic fabric) for example along joints between different or same materials, in order to limit visible cracking.
Under these conditions, this European Standard does not concern products covered by the following standards: EN 998 1, EN 998 2, EN 15824, EN 13279 1, EN 13963, EN 12860, EN 13813, EN ISO 11600.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12090:2013(Main)
Thermal insulating products for building applications - Determination of shear behaviour
SIST EN 12090:2013

This European Standard specifies the equipment and procedures for determining shear behaviour. It is applicable to thermal insulating products.
NOTE   The tests described in this standard do not determine pure shear behaviour, but measure the effects of applying two opposite parallel forces to the major faces of the test specimen. The test is however called shear in this text by convention. The application of a force tangentially to the major surface of the test specimen is considered to represent more closely the stresses imposed upon thermal insulation products in many building applications, particularly walls, than other methods of measuring shear performance e.g. bending tests.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 824:2013(Main)
Thermal insulating products for building applications - Determination of squareness
SIST EN 824:2013

This European Standard specifies the equipment and procedure for determining the deviation from squareness for length, width and/or thickness of full-size products. It is applicable to thermal insulating products. The method is normally applicable to products with straight edges. For products of other shape, e.g. profiled edges, the method can be adapted accordingly.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day