EN 9300-001:2024
(Main)Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 001: Structure
Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 001: Structure
This document defines the structure and content for the long-term preservation of digital product and technical data. EN 9300 is broken into a series of separate standard parts to make the standard applicable for different business requirements and extensible for further long-term archiving formats.
The following outlines the total scope of this document:
- for the purpose of this document, structure, and content of EN 9300 standard parts are detailed.
Luft- und Raumfahrt - LOTAR Langzeitarchivierung und Bereitstellung digitaler technischer Produktdokumentationen, beispielsweise 3D CAD und PDM Daten - Teil 001: Struktur
Série aérospatiale - LOTAR - Archivage long terme et récupération des données techniques produits numériques, telles que CAO, 3D et PDM - Partie 001 : Structure
Le présent document définit la structure et le contenu pour la conservation à long terme des données
techniques produits numériques. L’EN 9300 se décompose en une série de parties distinctes afin de
rendre la norme applicable à différentes exigences commerciales et extensible à d'autres formats
d'archivage à long terme.
Le domaine d’application complet du présent document est énoncé ci-après :
— pour les besoins du présent document, la structure et le contenu des parties de la norme EN 9300 y
sont détaillés.
Aeronavtika - LOTAR - Dolgoročno arhiviranje in iskanje digitalne tehnične dokumentacije o izdelkih, kot so podatki o 3D, CAD in PDM - 001. del: Struktura
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Aeronavtika - LOTAR - Dolgoročno arhiviranje in iskanje digitalne tehnične
dokumentacije o izdelkih, kot so podatki o 3D, CAD in PDM - 001. del: Struktura
Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and PDM data - Part 001: Structure
Luft- und Raumfahrt - LOTAR Langzeitarchivierung und Bereitstellung digitaler
technischer Produktdokumentationen, beispielsweise 3D CAD und PDM Daten - Teil
001: Struktur
Série aérospatiale - LOTAR Archivage Long Terme et récupération des données
techniques produits numériques, telles que CAD 3D et PDM - Partie 001 : Structure
Ta slovenski standard je istoveten z: EN 9300-001:2024
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
35.240.30 Uporabniške rešitve IT v IT applications in information,
informatiki, dokumentiranju in documentation and
založništvu publishing
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 9300-001
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2024
EUROPÄISCHE NORM
ICS 01.110; 35.240.30; 35.240.60; 49.020
English Version
Aerospace series - LOTAR - LOng Term Archiving and
Retrieval of digital technical product documentation such
as 3D, CAD and PDM data - Part 001: Structure
Série aérospatiale - LOTAR - Archivage long terme et Luft- und Raumfahrt - LOTAR Langzeitarchivierung
récupération des données techniques produits und Bereitstellung digitaler technischer
numériques, telles que CAO, 3D et PDM - Partie 001 : Produktdokumentationen, beispielsweise 3D CAD und
Structure PDM Daten - Teil 001: Struktur
This European Standard was approved by CEN on 27 November 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9300-001:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Applicability . 5
4.1 General. 5
4.2 Legal and certification aspects . 6
4.2.1 General. 6
4.2.2 Product liability law . 6
4.2.3 Patent law . 7
4.2.4 Regulation (EU) No 910/2014 . 7
4.2.5 Airworthiness regulation . 7
4.3 Technical aspects . 8
5 Structure and content . 10
5.1 General. 10
5.2 Basic parts . 10
5.3 Common process parts . 10
5.4 Support process parts . 11
5.5 Data domain specific parts . 11
5.5.1 General. 11
5.5.2 3D Mechanical CAD relevant parts . 11
5.5.3 Non-geometric metadata relevant parts (product lifecycle management data) . 12
5.5.4 Composite material data relevant parts . 12
5.5.5 Electrical harness data relevant parts . 12
5.5.6 Model-based system engineering data relevant parts . 12
5.5.7 Engineering analysis and simulation data relevant parts . 12
5.5.8 Electronics data relevant parts . 13
Bibliography . 14
European foreword
This document (EN 9300-001:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by April 2025, and conflicting national standards shall be withdrawn at
the latest by April 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes prEN 9300-001:2005, which was prepared jointly by ASD-STAN and the
prostep iViP Association.
The main changes with respect to the previous edition are as follows:
— prEN 9300-001 (P1), 10/2005 — Complete revision according to new rules and references.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
This document was prepared jointly by AIA, ASD-STAN, PDES, Inc., AFNeT and the prostep ivip
Association.
The AFNeT non-profit association has operated for more than 30 years a multi-sectoral “Think Tank”
articulated with a “Do Tank”, with digital transformation projects or standardization projects in many
industries. These activities have led to the emergence of a network of recognized and highly skilled
actors from the manufacturing industry, IT businesses, and research companies. Its members represent
leading industrial companies, SMEs, French governmental agencies, software vendors, universities, and
research organizations. AFNeT has conducted voluntary and innovative actions in order to develop
competitiveness and innovation in industry by setting up collaboration projects or programs in the
industrial sectors (aerospace and defence, automotive, rail, shipbuilding, nuclear, energy, etc.) to enable
the digital thread for the extended enterprise processes such as product lifecycle management, supply-
chain management, manufacturing, maintenance and operations, integrated logistics support, and
identification. AFNeT promotes the development, testing and usage of a set of coherent international
standards for supporting these activities, especially in the PLM and the SCM domains.
The prostep ivip association is an international non-profit association in Europe. For establishing
leadership in IT-based engineering it offers a moderated platform to its nearly 200 members from
leading industries, system vendors and research institutions. Its product and process data
standardization activities at European and worldwide levels are well known and accepted. The prostep
ivip association sees this document and the related parts as a milestone of product data technology.
PDES, Inc. is an international non-profit association in USA. The mission of PDES, Inc. is to accelerate the
development and implementation of ISO 10303, enabling enterprise integration and PLM
interoperability for member companies. PDES, Inc. gathers members from leading manufacturers,
national government agencies, PLM vendors and research organizations. PDES, Inc. supports this
document as an industry resource to sustain the interoperability of digital product information,
ensuring and maintaining authentic longevity throughout their product lifecycle.
Readers of this document should note that all standards undergo periodic revisions and that any
reference made herein to any other standard implies its latest edition, unless otherwise stated.
The standards will be published under two different standards organizations using different prefixes.
ASD-STAN will publish the standard under the number EN 9300–xxx. AIA will publish the standard
under the number NAS 9300–xxx. The content in the EN 9300 and NAS 9300 documents will be the
same. The differences will be noted in the reference documentation (i.e. for EN 9300, geometric
dimensioning and tolerancing will be referenced in ISO 1101 and ISO 16792, and for NAS 9300 the
same information will be referenced in ASME Y14.5 and Y14.41). The document formatting, etc., will
follow that of the respective editorial rules of ASD-STAN and AIA.
1 Scope
This document specifies the structure and content for the long-term preservation of digital product and
technical data. EN 9300 is broken into a series of separate standard parts to make the standard
applicable for different business requirements and extensible for further long-term archiving formats.
The following outlines the total scope of this document:
— for the purpose of this document, structure, and content of EN 9300 standard parts are detailed.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 9300-007, Aerospace series — LOTAR —LOng Term Archiving and Retrieval of digital technical
product documentation such as 3D, CAD and PDM data — Part 007: Terms and References
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 9300-007 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp/
— IEC Electropedia: available at https://www.electropedia.org/
4 Applicability
4.1 General
EN 9300 is a standard for long-term archiving and retrieval of digital technical product documentation.
Since technical product documentation, such as design documents, are generated, exchanged, and used
digitally, architecture, technology, processes, data f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.