Abstract

This document specifies the method of fuel consumption measurement for rough terrain- truck variable-reach trucks as defined in ISO 5053-1, herein after referred to as trucks. It does not apply to slewing trucks having a movement of more than 5° either side of the longitudinal axis.
This part is intended to be used in conjunction with ISO 23308-1. Where the requirements of this part differ from that in part 1, requirements in this part 4 will take precedence.

Status
Not Published
Publication Date
31-Mar-2027
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
31-Aug-2026
Due Date
04-Mar-2025
Completion Date
31-Aug-2026

Buy Documents

Draft

prEN ISO 23308-4:2025

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

FprEN ISO 23308-4 is a CEN standard for measuring fuel consumption of rough-terrain variable-reach trucks. It specifies the test method for trucks defined in ISO 5053-1 and is intended to be used together with ISO 23308-1, with this part taking precedence where requirements differ.

What does FprEN ISO 23308-4 specify?

FprEN ISO 23308-4 specifies how to measure fuel consumption for rough-terrain variable-reach trucks. It covers the test conditions, the duty phases, the calculation of CO emission, and the reporting of results.

The document is organized into:

  • scope
  • normative references
  • terms and definitions
  • test conditions
  • measurement procedure
  • calculation of CO emission
  • documentation

In practice, this means the standard tells users how to set up the truck and the test site, how to run the duty cycles, and what to record in the final report and declaration.

What are the key requirements of FprEN ISO 23308-4?

FprEN ISO 23308-4 builds on ISO 23308-1 and adds truck-specific test cycles for rough-terrain variable-reach trucks. The most important requirements are in Clauses 4 to 7.

Test scope and applicability

FprEN ISO 23308-4 applies to rough-terrain variable-reach trucks as defined in ISO 5053-1. It does not apply to slewing trucks with movement of more than 5° either side of the longitudinal axis.

For a user, this means the standard is for a specific truck type and should not be used for slewing machines outside that limit.

Test area and load conditions

FprEN ISO 23308-4 requires a flat, smooth, hard, clean and dry test area, such as concrete or asphalt, with no more than 2% slope in any direction. Unless another part of the ISO 23308 series says otherwise, the test load is 70% of rated load and standard load centre distance.

This matters because the truck must be tested under controlled, repeatable conditions that allow comparison between machines.

Truck condition before testing

FprEN ISO 23308-4 requires a representative sample from series production, with run-in time up to 100 hours allowed and documented. The truck must be safe, functional, and set up according to the manufacturer’s specification, including commercially available software settings.

It also requires new tyres, or tyres with no more than 10% tread wear, correct tyre inflation, and correct fluid fill levels. For internal combustion engine trucks, the fuel tank is filled to the maximum specified level before warm-up.

In practice, the test result should reflect a production-ready machine, not an unusual or specially prepared example.

Measurement method and fuel-use handling

FprEN ISO 23308-4 follows ISO 23308-1 for measurement, but allows indirect fuel-use measurement by a secondary removable fuel tank when direct tank measurement is not accurate enough. If the truck has a user-operated eco-mode intended to reduce fuel consumption, the standard requires a comparative test with and without eco-mode.

That means the test must capture real fuel-use behavior and show whether an efficiency mode changes the result.

Duty phases and timing

FprEN ISO 23308-4 defines four duty phases: travelling, idle mode, pick and carry, and bucket mode. Phases 1 and 2 must run for at least 10 minutes, while phases 3 and 4 require at least 10 cycles with an overall time tolerance of 2%.

During testing, traveling while lifting, lowering or tilting is not allowed, simultaneous operation is not allowed, all fluids must be at normal operating temperature, and air-conditioning must be switched off if fitted.

Phase-specific operating conditions

FprEN ISO 23308-4 sets separate operating conditions for each phase. Travelling is done on level ground at maximum speed, in both directions. Idle mode is engine running, stationary, with transmission in neutral.

Pick and carry uses a 70% load moved between two pallet racks 30 m apart, with the cycle adjusted to 1 minute. Bucket mode uses a bucket loaded to 35% to 50% of rated capacity, with material density between 1 450 kg/m3 and 1 900 kg/m3, and the bucket kept 500 mm ±100 mm above the ground while travelling.

These details matter because they define the exact work pattern used to represent the truck in service.

Results and documentation

FprEN ISO 23308-4 requires CO calculation according to ISO 23308-1:2020, Annex C, and reporting according to ISO 23308-1:2020, 6.2. When declared, the results are given separately for idle, travelling, pick and carry, and bucket mode, including bucket capacity and material density for bucket mode.

For a buyer, manufacturer, or test lab, this means the document defines both how to test and how to present the outcome.

What terms does FprEN ISO 23308-4 define?

FprEN ISO 23308-4 uses the terms and definitions from ISO 5053-1, ISO 10896-1, and ISO 23308-1, and it adds one defined term.

  • eco-mode - a system designed to improve fuel consumption and/or efficiency.
  • travelling - the phase in which the truck moves on level ground at maximum speed.
  • idle mode - the phase in which the engine runs while the truck is stationary and in neutral.
  • pick and carry - the duty phase where a load is lifted, moved between racks, and repositioned during the cycle.
  • bucket mode - the duty phase where the truck handles material with a bucket and dumps it into a receiving vehicle or equivalent.
  • rated load - the load basis used to set the 70% test load and the bucket loading range.
  • standard load centre distance - the load-position reference used with the rated load for test loading.

Who uses FprEN ISO 23308-4?

FprEN ISO 23308-4 is relevant to machine manufacturers, market surveillance authorities, machine users, and service providers such as consultants. It is used for comparing energy performance, checking product claims, and supporting testing and documentation of rough-terrain variable-reach trucks.

Which standards are used with FprEN ISO 23308-4?

FprEN ISO 23308-4 names these standards as references or related documents:

  • ISO 5053-1 - provides the vocabulary and the type definition for industrial trucks.
  • ISO 10896-1 - provides safety requirements and verification for rough-terrain variable-reach trucks.
  • ISO 23308-1:2020 - provides the general test method that this part uses and overrides where needed.
  • ISO 3691-1:2011 - supports load selection and lift-height conditions for certain truck types.
  • ISO 3691-2:2016 - supports load selection and truck-type conditions where applicable.

What does the FprEN ISO 23308-4 document contain?

FprEN ISO 23308-4 contains the test conditions for the test area, truck condition, and loading setup. It also contains the step-by-step measurement procedure for the four duty phases, including two illustrated test layouts: Figure 1 for pick and carry and Figure 2 for bucket mode.

The document also points users to ISO 23308-1 for CO calculation and for the report format. Its documentation clause sets out what must be communicated when fuel-consumption results are declared, including mode-specific results and the bucket test details.

Relations

Effective Date
28-Jan-2026
Effective Date
12-Feb-2026
Effective Date
03-Sep-2025

Buy Documents

Draft

prEN ISO 23308-4:2025

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

Frequently Asked Questions

FprEN ISO 23308-4 is a draft published by the European Committee for Standardization (CEN). Its full title is "Energy efficiency of industrial trucks - Test methods - Part 4: Rough-terrain variable-reach trucks (ISO/FDIS 23308-4:2026)". This standard covers: This document specifies the method of fuel consumption measurement for rough terrain- truck variable-reach trucks as defined in ISO 5053-1, herein after referred to as trucks. It does not apply to slewing trucks having a movement of more than 5° either side of the longitudinal axis. This part is intended to be used in conjunction with ISO 23308-1. Where the requirements of this part differ from that in part 1, requirements in this part 4 will take precedence.

This document specifies the method of fuel consumption measurement for rough terrain- truck variable-reach trucks as defined in ISO 5053-1, herein after referred to as trucks. It does not apply to slewing trucks having a movement of more than 5° either side of the longitudinal axis. This part is intended to be used in conjunction with ISO 23308-1. Where the requirements of this part differ from that in part 1, requirements in this part 4 will take precedence.

FprEN ISO 23308-4 is classified under the following ICS (International Classification for Standards) categories: 53.060 - Industrial trucks. The ICS classification helps identify the subject area and facilitates finding related standards.

FprEN ISO 23308-4 has the following relationships with other standards: It is inter standard links to EN ISO 9466:2025, ISO/FDIS 23308-4, EN 16796-4:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

FprEN ISO 23308-4 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2025
Vozila za talni transport - Energijska učinkovitost - Preskusne metode - 4. del:
Vozila za talni transport s spremenljivim dosegom (ISO/DIS 23308-4:2025)
Energy efficiency of industrial trucks - Test methods - Part 4: Variable-reach rough-
terrain trucks (ISO/DIS 23308-4:2025)
Energieeffizienz von Flurförderzeugen - Prüfverfahren - Teil 4: Geländegängige
Flurförderzeuge mit veränderlicher Reichweite (ISO/DIS 23308-4:2025)
Efficacité énergétique des chariots de manutention - Méthodes d'essai - Partie 4:
Chariots tout-terrain à portée variable (ISO/DIS 23308-4:2025)
Ta slovenski standard je istoveten z: prEN ISO 23308-4
ICS:
27.015 Energijska učinkovitost. Energy efficiency. Energy
Ohranjanje energije na conservation in general
splošno
53.060 Industrijski tovornjaki Industrial trucks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
International
Standard
ISO/DIS 23308-4
ISO/TC 110/SC 4
Energy efficiency of industrial
Secretariat: AFNOR
trucks — Test methods —
Voting begins on:
Part 4: 2025-06-09
Variable-reach rough-terrain trucks
Voting terminates on:
2025-09-01
Efficacité énergétique des chariots de manutention — Méthodes
d'essai —
Partie 4: Chariots tout-terrain à portée variable
ICS: 53.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 23308-4:2025(en)
DRAFT
ISO/DIS 23308-4:2025(en)
International
Standard
ISO/DIS 23308-4
ISO/TC 110/SC 4
Energy efficiency of industrial
Secretariat: AFNOR
trucks — Test methods —
Voting begins on:
Part 4:
Variable-reach rough-terrain trucks
Voting terminates on:
Efficacité énergétique des chariots de manutention — Méthodes
d'essai —
Partie 4: Chariots tout-terrain à portée variable
ICS: 53.060
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 23308-4:2025(en)
ii
ISO/DIS 23308-4:2025(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test conditions . 1
4.1 General .1
4.2 Test equipment .2
4.2.1 Test area .2
4.2.2 Test track .2
4.2.3 Test load and / or towing capacity .2
4.3 Truck conditions .2
4.4 Test conditions .2
5 Measurement procedure . 3
5.1 General .3
5.2 Truck duty phases .3
5.2.1 General .3
5.2.2 Phase 1 – Travelling .3
5.2.3 Phase 2 – Idle mode.3
5.2.4 Phase 3 – Pick and carry . .3
5.2.5 Phase 4 – Bucket mode .4
5.3 Test layout .4
6 Calculation of CO emission . 6
7 Documentation . 6
7.1 Report .6
7.2 Declaration .6
Bibliography . 7

iii
ISO/DIS 23308-4:2025(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 110 Industrial trucks, Subcommittee
SC 4 Rough-terrain trucks.
A list of all parts in the ISO 23308 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
ISO/DIS 23308-4:2025(en)
Introduction
The ISO 23308 series deals with energy efficiency of industrial trucks including batteries and chargers.
ISO 23308-1 contains the procedures to determine the efficiency of trucks, traction batteries and battery
chargers. The other parts provide a specific test cycle for different truck types.
NOTE The test cycles are based on the VDI 2198 guideline. This guideline is widely accepted by the industry and is
used to measure the energy consumption of electric industrial trucks and internal combustion (IC) industrial trucks.
...