EN 2310:1991
(Main)Aerospace series - Test methods for the flame resistance rating of non-metallic materials
Aerospace series - Test methods for the flame resistance rating of non-metallic materials
This standard defines the test methods for the flame resistance rating of non-metallic materials. It applies exclusively to materials whose specific standard requires this type of test. It cannot be substituted for the statutory test required for a final specific use of the material concerned.
Luft- und Raumfahrt - Prüfverfahren zur Klassifizierung des Brandverhaltens von nichtmetallischen Werkstoffen
Diese Norm legt die Prüfverfahren zur Klassifizierung des Brandverhaltens von nichtmetallischen Werkstoffen fest. Sie ist nur bei Werkstoffen anzuwenden, deren Einzelnorm diese Prüfart vorsieht. Sie darf nicht an die Stelle der für eine spezielle Endverwendung des betroffenen Werkstoffes erforderlichen gesetzlich vorgeschriebenen Prüfungen treten.
Série aérospatiale - Méthodes d'essai de comportement au feu pour le classement des matériaux non métalliques
La présente norme définit les méthodes d'essai de comportement au feu pour le classement de matériaux non métalliques. Elle s'applique exclusivement aux matériaux dont la norme particulière exige ce type d'essai. Elle ne saurait se substituer aux essais réglementaires requis pour une utilisation spécifique finale du matériau concerné.
Aerospace series - Test methods for the flame resistance rating of non-metallic materials
General Information
Overview
EN 2310:1991 - Aerospace series - Test methods for the flame resistance rating of non-metallic materials (CEN) defines standardized test methods for assessing the flame resistance of non-metallic materials used in aerospace contexts. The standard applies only when a specific material standard requires this type of test and does not replace any statutory or end‑use certification tests required for the material’s final application.
Key topics and requirements
EN 2310 establishes the framework and procedural elements required to produce repeatable, comparable flame‑resistance ratings. While specific test parameters are set by the standard and the referencing material standard, the typical technical topics covered include:
- Scope and applicability - which non‑metallic materials and situations the methods are intended for.
- Specimen preparation - required sample dimensions, conditioning and handling to ensure consistent test results.
- Test apparatus and setup - configuration and calibration of equipment needed to perform flame resistance tests.
- Ignition and exposure procedures - controlled procedures for applying an ignition source and monitoring material behaviour.
- Observation and measurement - criteria for recording flame spread, after‑flame, after‑glow, dripping and other observable phenomena.
- Classification and reporting - how results are converted into a flame‑resistance rating and the information that must appear in test reports.
- Limitations and conformity - notes on when EN 2310 is applicable and explicit statement that it cannot substitute legally required final‑use tests.
(Exact numerical parameters, durations and pass/fail thresholds are defined in the standard text and any specific material standards that reference EN 2310.)
Applications
EN 2310 is used to assess the fire behaviour of non‑metallic materials commonly found in aerospace systems, such as insulation, interior panels, seat components, adhesives, coatings and composite laminates. The standard supports:
- Material selection during design and qualification
- Supplier quality control and incoming inspection
- Comparative evaluation of alternative materials
- Preparation of technical dossiers for certification processes
Who uses this standard
- Aerospace manufacturers and integrators specifying material performance
- Material and component suppliers demonstrating compliance to customers
- Test laboratories performing standardized flame‑resistance testing
- Certification bodies and regulators reviewing fire safety evidence
- Design engineers and safety specialists assessing material choices
Related standards
EN 2310 is part of a family of aerospace and material testing standards. It is intended to be used only where referenced by a specific material standard. It does not replace statutory or final‑use tests required by regulatory authorities or other EN standards specific to a material or application.
Keywords: EN 2310, flame resistance, non‑metallic materials, aerospace, test methods, flammability, material testing, classification.
Frequently Asked Questions
EN 2310:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Test methods for the flame resistance rating of non-metallic materials". This standard covers: This standard defines the test methods for the flame resistance rating of non-metallic materials. It applies exclusively to materials whose specific standard requires this type of test. It cannot be substituted for the statutory test required for a final specific use of the material concerned.
This standard defines the test methods for the flame resistance rating of non-metallic materials. It applies exclusively to materials whose specific standard requires this type of test. It cannot be substituted for the statutory test required for a final specific use of the material concerned.
EN 2310:1991 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 49.025.99 - Other materials. The ICS classification helps identify the subject area and facilitates finding related standards.
You can purchase EN 2310:1991 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Test methods for the flame resistance rating of non-metallic materialsLuft- und Raumfahrt - Prüfverfahren zur Klassifizierung des Brandverhaltens von nichtmetallischen WerkstoffenSérie aérospatiale - Méthodes d'essai de comportement au feu pour le classement des matériaux non métalliquesAerospace series - Test methods for the flame resistance rating of non-metallic materials49.025.99Drugi materialiOther materials13.220.40Sposobnost vžiga in obnašanje materi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...