EN 1533:2010

Wood flooring - Determination of bending strength under static load - Test methods

This European Standard specifies methods of determining the bending strength of wood and parquet flooring under static loads: a method with a static line load and a method with a static point load.
The methods apply to wood and parquet flooring installed on a non-continuous support and thus assuming static load-bearing conditions.

Holzfußböden - Bestimmung der Biegefestigkeit unter statischer Beanspruchung - Prüfmethoden

Diese Europäische Norm legt Verfahren fest, mit denen die Biegefestigkeit von Holzfußböden unter statischen Belastungen bestimmt wird: ein Verfahren mit einer statischen linearen Kraft und ein Verfahren mit einer statischen Einzelkraft.
Die Verfahren werden bei Holzfußböden angewendet, die auf einer nicht durchgehenden Unterlage an-gebracht sind und folglich tragende Funktion haben.

Planchers en bois - Détermination de la flexion sous charge statique - Méthodes d'essai

La présente norme européenne définit des méthodes de détermination des propriétés de flexion des parquets et planchers en bois : une méthode avec une charge linéaire statique et une méthode avec une charge ponctuelle statique.
Les méthodes s’appliquent aux planchers en bois mis en oeuvre sur un support discontinu et par conséquent travaillant sous charge statique.

Lesene in parketne talne obloge - Ugotavljanje upogibnih lastnosti pri statičnih obremenitvah - Preskusne metode

Ta mednarodni standard določa metodi ugotavljanja upogibnih lastnosti lesenih talnih oblog pri statičnih obremenitvah: metodo s statično linijsko obremenitvijo in metodo s statično točkovno obremenitvijo. Metodi veljata za lesene talne obloge, nameščene na prekinjeno podporo, s čimer se predvidijo pogoji statične nosilnosti.

General Information

• Status: Published
• Publication Date: 03-Aug-2010
• Withdrawal Date: 27-Feb-2011
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 33 - Specific user requirements - Timber in flooring
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 23-Jun-2021
• Ref Project: SIST EN 1533:2011 - Wood and parquet flooring - Determination of bending strength under static load - Test methods

Relations

• Replaces: EN 1533:2000 - Wood and parquet flooring - Determination of bending properties - Test methods
• Effective Date: 09-Aug-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Parkett und Holzfußböden - Bestimmung der Biegefestigkeit unter statischer Beanspruchung - PrüfmethodenParquets et planchers en bois - Détermination de la flexion sous charges statiques - Méthodes d'essaisWood and parquet flooring - Determination of bending strength under static load - Test methods97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 1533:2010SIST EN 1533:2011en,fr,de01-februar-2011SIST EN 1533:2011SLOVENSKI
STANDARDSIST EN 1533:20031DGRPHãþD



SIST EN 1533:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1533
August 2010 ICS 79.080 English Version
Wood flooring - Determination of bending strength under static load - Test methods
Planchers en bois - Détermination de la flexion sous charge statique - Méthodes d'essai
Holzfußböden - Bestimmung der Biegefestigkeit unter statischer Beanspruchung - Prüfmethoden This European Standard was approved by CEN on 26 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1533:2010: ESIST EN 1533:2011



EN 1533:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .54.1 General .54.2 Static line load .54.3 Static point load .55 Apparatus .55.1 Measuring instrument for dimensions and deflection .55.2 Loading equipment .55.2.1 Accuracy .55.2.2 Static line load .55.2.3 Static load .55.3 Support .76 Test assembly .86.1 Preparation of a test assembly .
...