SIST EN 1533:2011
(Main)Wood and parquet flooring - Determination of bending strength under static load - Test methods
Wood and parquet flooring - Determination of bending strength under static load - Test methods
This European Standard specifies methods of determining the bending strength of wood flooring under static load: a method with a static line load and a method with a static point load. The methods apply to wood flooring installed on a non-continuous support and thus assuming static loadbearing conditions.
Parkett und Holzfußböden - Bestimmung der Biegefestigkeit unter statischer Beanspruchung - Prüfmethoden
Diese Europäische Norm legt Verfahren fest, mit denen die Biegefestigkeit von Parkett und Holzfußböden unter statischen Belastungen bestimmt wird: ein Verfahren mit einer statischen linearen Kraft und ein Verfahren mit einer statischen Einzelkraft.
Die Verfahren werden bei Parkett und Holzfußböden angewendet, die auf einer nicht durchgehenden Unterlage angebracht sind und folglich tragende Funktion haben.
Parquets et planchers en bois - Détermination de la flexion sous charges statiques - Méthodes d'essais
La présente norme européenne définit des méthodes de détermination des propriétés de flexion des parquets et planchers en bois : une méthode avec une charge linéaire statique et une méthode avec une charge ponctuelle statique.
Les méthodes s’appliquent aux parquets et planchers en bois mis en oeuvre sur un support discontinu et par conséquent travaillant sous charge statique.
Lesene in parketne talne obloge - Ugotavljanje upogibnih lastnosti pri statičnih obremenitvah - Preskusne metode
Ta mednarodni standard določa metodi ugotavljanja upogibnih lastnosti lesenih talnih oblog pri statičnih obremenitvah: metodo s statično linijsko obremenitvijo in metodo s statično točkovno obremenitvijo. Metodi veljata za lesene talne obloge, nameščene na prekinjeno podporo, s čimer se predvidijo pogoji statične nosilnosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Parkett und Holzfußböden - Bestimmung der Biegefestigkeit unter statischer Beanspruchung - PrüfmethodenParquets et planchers en bois - Détermination de la flexion sous charges statiques - Méthodes d'essaisWood and parquet flooring - Determination of bending strength under static load - Test methods97.150Netekstilne talne oblogeNon-textile floor coverings79.080Polizdelki iz lesaSemi-manufactures of timberICS:Ta slovenski standard je istoveten z:EN 1533:2010SIST EN 1533:2011en,fr,de01-februar-2011SIST EN 1533:2011SLOVENSKI
STANDARDSIST EN 1533:20031DGRPHãþD
SIST EN 1533:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1533
August 2010 ICS 79.080 English Version
Wood flooring - Determination of bending strength under static load - Test methods
Planchers en bois - Détermination de la flexion sous charge statique - Méthodes d'essai
Holzfußböden - Bestimmung der Biegefestigkeit unter statischer Beanspruchung - Prüfmethoden This European Standard was approved by CEN on 26 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1533:2010: ESIST EN 1533:2011
EN 1533:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .54.1 General .54.2 Static line load .54.3 Static point load .55 Apparatus .55.1 Measuring instrument for dimensions and deflection .55.2 Loading equipment .55.2.1 Accuracy .55.2.2 Static line load .55.2.3 Static load .55.3 Support .76 Test assembly .86.1 Preparation of a test assembly .86.1.1 General .86.1.2 Wood flooring of which the ends of the elements are supported by the battens . 106.1.3 Wood flooring of which the ends of the elements are not supported by the battens . 106.2 Sampling . 106.3 Conditioning . 107 Procedure . 107.1 General . 107.2 Placing of the test assembly . 117.2.1 General . 117.2.2 Static line load . 117.2.3 Static point load . 117.3 Determination of the maximum load for the test assembly . 118 Expression of the results for a sample . 118.1 Common statistical methods . 118.1.1 Mean value . 118.1.2 Standard deviation. 118.1.3 Characteristic values . 128.2 Final results . 149 Test report . 14Bibliography . 15 SIST EN 1533:2011
EN 1533:2010 (E) 3 Foreword This document (EN 1533:2010) has been prepared by Technical Committee CEN/TC 175 “Round and sawn timber”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn at the latest by February 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1533:2000. Compared with EN 1533:2000, the following modifications have been made: a) modification of accuracy in 5.1; b) modification of loading equipment for static load (5.2.3); c) modification and improvement of Figures 1, 2 and 3; d) simplification and new presentation of Clause 6 regarding test assembly; e) simplification and new presentation of Clause 7 regarding procedure; f) simplification and new presentation of Clause 8 regarding expression of results. This standard is one of a series of standards concerning wood flooring and wood panelling and cladding. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1533:2011
EN 1533:2010 (E) 4 1 Scope This European Standard specifies methods of determining the bending strength of wood flooring under static load: a method with a static line load and a method with a static point load. The methods apply to wood flooring installed on a non-continuous support and thus assuming static load-bearing conditions. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited a
...
SLOVENSKI STANDARD
oSIST prEN 1533:2008
01-december-2008
Lesene in parketne talne obloge - Ugotavljanje upogibnih lastnosti - Preskusne
metode
Wood and parquet flooring - Determination of bending strength under static load - Test
methods
Parkett und Holzfußböden - Bestimmung der Biegefestigkeit unter statischer
Beanspruchung - Prüfmethoden
Parquets et planchers en bois - Détermination de la flexion sous charges statiques -
Méthodes d'essais
Ta slovenski standard je istoveten z: prEN 1533
ICS:
79.080 Polizdelki iz lesa Semi-manufactures of timber
oSIST prEN 1533:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 1533:2008
---------------------- Page: 2 ----------------------
oSIST prEN 1533:2008
EUROPEAN STANDARD
DRAFT
prEN 1533
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2008
ICS 79.080 Will supersede EN 1533:2000
English Version
Wood and parquet flooring - Determination of bending strength
under static load - Test methods
Parquets et planchers en bois - Détermination des Parkett und Holzfußböden - Bestimmung der
propriétés de flexion - Méthodes d'essai Biegefestigkeit unter statischer Beanspruchung -
Prüfmethoden
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 175.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
: This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
Warning
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1533:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 1533:2008
prEN 1533:2008 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle.5
4.1 General.5
4.2 Static line road .5
4.3 Static point load.5
5 Apparatus .5
5.1 Measuring instruments for dimensions and deflection.5
5.2 Loading equipment.5
5.2.1 Accuracy.5
5.2.2 Static line load.5
5.2.3 Static point load.5
5.3 Support .7
6 Test assembly .8
6.1 Preparation of a test assembly.8
6.1.1 General.9
6.1.2 Wood flooring of which the ends of the elements are borne by the battens .9
6.1.3 Wood flooring of which the ends of the elements are not borne by the battens.9
6.2 Sampling.9
6.3 Conditioning.9
7 Procedure .10
7.1 General.10
7.2 Placing of the test assembly .10
7.2.1 General.10
7.2.2 Static line load.10
7.2.3 Static point load.10
7.3 Determination of the maximum load for the test assembly .10
8 Expression of the results for a sample .10
8.1 Common statistical methods.10
8.1.1 Mean value.10
8.1.2 Standard deviation.11
8.1.3 Characteristic values.11
8.2 Final results.13
9 Test report .13
2
---------------------- Page: 4 ----------------------
oSIST prEN 1533:2008
prEN 1533:2008 (E)
Foreword
This document (prEN 1533:2008) has been prepared by Technical Committee CEN/TC 175 “Round and sawn
timber”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 1533:2000.
This standard is one of a series of standards concerning wood and parquet flooring and wood panelling and
cladding.
3
---------------------- Page: 5 ----------------------
oSIST prEN 1533:2008
prEN 1533:2008 (E)
1 Scope
This European Standard specifies methods of determining the bending strength of wood and parquet flooring
under static loads : a method with a static line load and a method with a static point load.
The methods apply to wood and parquet flooring installed on a non-continuous support and thus assuming
static load-bearing conditions.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 13756 :2002, Wood flooring - Terminology.
EN 1991-1-1, Eurocode 1 – Actions on structures – Part 1-1 : General actions – Densities, sefl weight,
imposed loads for buildings.
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 13756:2002 and the following apply.
3.1
test assembly
set of wood or parquet flooring elements assembled according to a defined type or to the instructions of the
manufacturer, for the purpose of being tested.
3.2
element
the smallest individual part (e.g. a strip, a board) of wood or parquet flooring.
3.3
maximum load
maximum force lea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.