EN ISO 10675-1:2016
(Main)Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016)
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016)
ISO 10675-1:2016 specifies acceptance levels for indications from imperfections in butt welds of steel, nickel, titanium and their alloys detected by radiographic testing. If agreed, the acceptance levels can be applied to other types of welds or materials.
The acceptance levels can be related to welding standards, application standards, specifications or codes. This document assumes that the radiographic testing has been carried out in accordance with ISO 17636‑1 and ISO 17636‑2.
When assessing whether a weld meets the requirements specified for a weld quality level, the sizes of imperfections permitted by standards are compared with the dimensions of indications revealed by a radiograph made of the weld.
Zerstörungsfreie Prüfung von Schweißverbindungen - Zulässigkeitsgrenzen für die Durchstrahlungsprüfung - Teil 1: Stahl, Nickel, Titan und deren Legierungen (ISO 10675-1:2016)
Essais non destructifs des assemblages soudés - Niveaux d'acceptation pour évaluation par radiographie - Partie 1: Acier, nickel, titane et leurs alliages (ISO 10675-1:2016)
L'ISO 10675-1:2016 spécifie les niveaux d'acceptation des indications des défauts présents dans les assemblages soudés bout à bout en acier, nickel, titane et leurs alliages détectés par contrôle radiographique. En fonction des accords passés, les niveaux d'acceptation peuvent être appliqués à d'autres types d'assemblages soudés ou matériaux.
Les niveaux d'acceptation peuvent être reliés à des normes de soudage, des normes d'application, des spécifications ou des codes. L'ISO 10675-1:2016 présume que le contrôle par radiographie a été exécuté conformément à l'ISO 17636‑1 à l'ISO 17636‑2.
Lorsqu'il est vérifié qu'une soudure satisfait aux exigences spécifiées pour un niveau de qualité de soudure, les dimensions des défauts permises par les normes sont comparées aux dimensions des
Neporušitveno preskušanje zvarov - Stopnje sprejemljivosti pri radiografiji - 1. del: Jeklo, nikelj, titan in njihove zlitine (ISO 10675-1:2016)
Ta dokument določa stopnje sprejemljivosti za označevanje na podlagi nepravilnosti v soležnih zvarih jekla,
niklja, titana in njihovih zlitin, ki se zaznajo z radiografijo. V primeru dogovora se lahko stopnje sprejemljivosti uporabljajo za druge vrste zvarov ali materialov.
Stopnje sprejemljivosti se lahko nanašajo na standarde varjenja, standarde uporabe, specifikacije ali
oznake. Ta dokument predvideva, da je bila radiografija izvedena v skladu s standardoma ISO 17636-1 in ISO 17636-2.
Pri ocenjevanju, ali zvar ustreza zahtevam, ki so določene za raven kakovosti zvara, se število nepravilnosti, ki jih dovoljujejo standardi, primerja z dimenzijami oznak, ki jih razkrije radiografska slika zvara.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10675-1:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 10675-1:2013
Neporušitveno preskušanje zvarov - Stopnje sprejemljivosti pri radiografiji - 1. del:
Jeklo, nikelj, titan in njihove zlitine (ISO 10675-1:2016)
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1:
Steel, nickel, titanium and their alloys (ISO 10675-1:2016)
Zerstörungsfreie Prüfung von Schweißverbindungen - Zulässigkeitsgrenzen für die
Durchstrahlungsprüfung - Teil 1: Stahl, Nickel, Titan und deren Legierungen (ISO 10675-
1:2016)
Essais non destructifs des assemblages soudés - Niveaux d'acceptation pour évaluation
par radiographie - Partie 1: Acier, nickel, titane et leurs alliages (ISO 10675-1:2016)
Ta slovenski standard je istoveten z: EN ISO 10675-1:2016
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
SIST EN ISO 10675-1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10675-1:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 10675-1:2017
EN ISO 10675-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2016
EUROPÄISCHE NORM
ICS 25.160.40 Supersedes EN ISO 10675-1:2013
English Version
Non-destructive testing of welds - Acceptance levels for
radiographic testing - Part 1: Steel, nickel, titanium and
their alloys (ISO 10675-1:2016)
Essais non destructifs des assemblages soudés - Zerstörungsfreie Prüfung von Schweißverbindungen -
Niveaux d'acceptation pour évaluation par Zulässigkeitsgrenzen für die Durchstrahlungsprüfung -
radiographie - Partie 1: Acier, nickel, titane et leurs Teil 1: Stahl, Nickel, Titan und deren Legierungen (ISO
alliages (ISO 10675-1:2016) 10675-1:2016)
This European Standard was approved by CEN on 14 December 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10675-1:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10675-1:2017
EN ISO 10675-1:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10675-1:2017
EN ISO 10675-1:2016 (E)
European foreword
This document (EN ISO 10675-1:2016) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 10675-1:2013.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.