EN 13877-1:2004
(Main)Concrete pavements - Part 1: Materials
Concrete pavements - Part 1: Materials
This European Standard is applicable to concrete pavements cast in situ and compacted by vibration or fluidified. It also covers lean concrete and sub-bases compacted by vibration as well as wearing courses on bridge decks. This standard concerns pavements for roads, motorways and airports, pedestrian streets, cycle tracks, storage areas and, in general, all traffic-bearing structures. This standard specifies requirements for: - the consituents of concrete pavements; - the properties of fresh and hardened concrete; - the limitations for concrete compositions.
Fahrbahnbefestigungen aus Beton - Teil 1: Baustoffe
Dieses Dokument legt Anforderungen fest an:
- die Bestandteile (Beton und weitere Baustoffe) für Fahrbahnbefestigungen aus Beton;
- die Eigenschaften von frischem und erhärtetem Beton.
Dieses Dokument gilt für Fahrbahnbefestigungen aus Beton, die vor Ort hergestellt werden. Mit Walzen verdichteter Beton wird nicht in diesem Dokument behandelt.
Dieses Dokument behandelt Beton für Straßen, Autobahnen und Flugplätze, Fußgängerwege, Fahrradwege, Lagerplätze und allgemein für sämtliche verkehrsbelastete Befestigungen.
Chaussées en béton - Partie 1: Matériaux
La présente Norme européenne spécifie les prescriptions concernant :
- les constituants (béton et autres matériaux) des chaussées en béton ;
- les propriétés du béton frais et durci.
Cette Norme européenne est applicable aux chaussées en béton coulé en place. Le béton compacté par rouleaux n'est pas couvert par cette norme.
Cette Norme européenne concerne les chaussées de routes, autoroutes et aéroports, voies piétonnes, pistes cyclables, zones de stockage et, en général, toutes les structures supportant une circulation.
Betonska vozišča – 1. del: Materiali
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbahnbefestigungen aus Beton - Teil 1: BaustoffeChaussées en béton - Partie 1: MatériauxConcrete pavements - Part 1: Materials93.080.20Materiali za gradnjo cestRoad construction materials91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13877-1:2004SIST EN 13877-1:2005en01-januar-2005SIST EN 13877-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13877-1August 2004ICS 93.080.20English versionConcrete pavements - Part 1: MaterialsChaussées en béton - Partie 1: MatériauxFahrbahnbefestigungen aus Beton - Teil 1: BaustoffeThis European Standard was approved by CEN on 16 January 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13877-1:2004: ESIST EN 13877-1:2005
1 Scope This document specifies requirements for: the constituents (concrete and other materials) of concrete pavements; the properties of fresh and hardened concrete. This document is applicable to concrete pavements cast in-situ. Concrete compacted by rollers is not covered by this document. This document covers concrete pavements for roads, motorways and airports, pedestrian footpaths, cycle tracks, storage areas, and in general all traffic-bearing structures. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 206-1, Concrete – Part 1: Specification, performance, production and conformity. EN 1008, Mixing water for concrete – Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete ENV 10080: Steel for reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric EN 12350-7, Testing fresh concrete — Part 7: Air content – Pressure methods EN 12390-3, Testing hardened concrete — Part 3: Compressive strength of test specimens EN 12390-5, Testing hardened concrete — Part 5: Flexural strength of test specimens EN 12390-6, Testing hardened concrete — Part 6: Tensile splitting strength of test specimens prEN 12390-9, Testing hardened concrete — Part 9: Freeze/thaw resistance - Scaling EN 12620, Aggregates for concrete EN 13877-2:2004, Concrete pavements - Part 2: Functional requirements for concrete pavements prEN 13877-3, Concre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.