EN 81-2:1998/A2:2004

Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces

New TD for st. 49 : 02-09-01 (limited lifetime exercise) (NT/020506).

Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Teil 2: Hydraulisch betriebene Personen- und Lastenaufzüge - A2: Aufstellungsorte von Triebwerk und Steuerung sowie Seilrollen

Règles de sécurité pour la construction et l'installation des ascenseurs - Partie 2 : Ascenseurs hydrauliques - A2 :Emplacements de machinerie et de poulies

Varnostna pravila za konstruiranje in vgradnjo dvigal (liftov) - 2. del: Hidravlična dvigala - A2: Prostori za pogon in vrvenice

General Information

• Status: Withdrawn
• Publication Date: 05-Oct-2004
• Withdrawal Date: 22-Dec-2009
• ICS: 91.140.90 - Lifts. Escalators
• Technical Committee: CEN/TC 10 - Passenger, goods and service lifts
• Drafting Committee: CEN/TC 10 - Passenger, goods and service lifts
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Dec-2009
• Completion Date: 23-Dec-2009
• Directive: 95/16/EC - European Parliament and Council Directive 95/16/EC of 29 June 1995 on the approximation of the laws of the Member States relating to lifts
• Mandate: M/BC/CEN/92/3 - Standardization mandate assigned to CEN/CENELEC concerning Lifts
• Ref Project: SIST EN 81-2:1999/A2:2005 - Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces

Relations

• Merged Into: EN 81-2:1998+A3:2009 - Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts
• Effective Date: 19-Jan-2023
• Amends: EN 81-2:1998 - Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2005
9DUQRVWQDSUDYLOD]DNRQVWUXLUDQMHLQYJUDGQMRGYLJDOOLIWRYGHO+LGUDYOLþQD
GYLJDOD$3URVWRUL]DSRJRQLQYUYHQLFH
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2:
Machinery and pulley spaces
Sicherheitsregeln für die Konstruktion und den Einbau von Aufzügen - Teil 2: Hydraulisch
betriebene Personen- und Lastenaufzüge - A2: Aufstellungsorte von Triebwerk und
Steuerung sowie Seilrollen
Regles de sécurité pour la construction et l'installation des ascenseurs - Partie 2 :
Ascenseurs hydrauliques - A2 :Emplacements de machinerie et de poulies
Ta slovenski standard je istoveten z: EN 81-2:1998/A2:2004
ICS:
91.140.90 'YLJDOD7HNRþHVWRSQLFH Lifts. Escalators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 81-2:1998/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2004
ICS 91.140.90
English version
Safety rules for the construction and installation of lifts - Part 2:
Hydraulic lifts - A2: Machinery and pulley spaces
Règles de sécurité pour la construction et l'installation des Sicherheitsregeln für die Konstruktion und den Einbau von
ascenseurs - Partie 2: Ascenseurs hydrauliques - A2: Aufzügen und Kleingüteraufzüge - Teil 2: Hydraulisch
Emplacements de machinerie et des poulies betriebene Personen- und Lastenaufzüge - A2:
Aufstellungsorte von Triebwerk und Steuerung sowie
Seilrollen
This amendment A2 modifies the European Standard EN 81-2:1998; it was approved by CEN on 22 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 81-2:1998/A2:2004: E
worldwide for CEN national Members.

Contents
Foreword.4
3 Definitions .6
5 Lift well.6
5.3.3 Strength of the ceiling.6
6 Machine and pulley rooms.6
6 Machinery and pulley spaces .6
6.1 General provisions .6
6.2 Access .6
6.3 Machinery in machine room .7
6.3.1 General provisions .7
6.3.2 Mechanical strength, floor surface .7
6.3.3 Dimensions.7
6.3.4 Doors and trap doors .8
6.3.5 Other openings .8
6.3.6 Ventilation.8
6.3.7 Lighting and socket outlets .8
6.3.8 Handling of equipment.9
6.4 Machinery inside the well .9
6.4.1 General provisions .9
6.4.2 Dimensions of working areas inside the well .9
6.4.3 Working areas in the car or on the car roof .9
6.4.4 Working areas in the pit .10
6.4.5 Working areas on a platform .11
6.4.6 Working areas outside of the well.12
6.4.7 Doors and traps .12
6.4.8 Ventilation.13
6.4.9 Lighting and socket outlets .13
6.4.10 Handling of equipment.13
6.5 Machinery outside of the well.13
6.5.1 General provisions .13
6.5.2 Machinery cabinet.13
6.5.3 Working area .14
6.5.4 Ventilation.14
6.5.5 Lighting and socket outlets .14
6.6 Devices for emergency and test operations .14
6.7 Construction and equipment of pulley spaces.14
6.7.1 Pulley rooms .14
6.7.2 Pulleys in the well.16
12 Lift machine.16
12.5.1 Shut-off valve .16
12.7 Tank.16
12.9 Emergency operation .16
12.9.1 Moving the car downwards.16
12.9.2 Moving the car upwards.16
12.9.3 Checking of the car position .17
13 Electric installations and appliances.17
13.1 General provisions .17
13.4 Main switches.17
13.6 Lighting and socket outlets .18
13.6.3 Control of the supply for lighting and socket outlets.18
14 Protection against electric faults ; controls ; priorities.18
14.2 Controls .18
14.2.2 Stopping devices .19
14.2.3 Emergency alarm device.20
15 Notices, markings and operating instructions .20
15.4 Machine and pulley rooms.20
15.4 Machine and pulley spaces .20
15.5 Well.21
16 Examinations - Tests - Register - Maintenance.21
16.3 Installer information .21
16.3.1 Normal use .21
Annex A (normative) List of the electric safety devices.22
Annex C (informative) Technical dossier.24
C.2 General.24
C.3 Technical details and plans.24
Annex D (normative) Examinations and tests before putting into service.26
D.2 Tests and verifications.26
Annex E (informative) Periodical examinations and tests, examinations and tests after an important
modification or after an accident .27
E.2 Examinations and tests after an important modification or after an accident.27
Annex L (informative) Machinery spaces - Access (6.1) .29
Annex ZA (informative) Clauses of this standard addressing essential requirements or other
provisions of EU Directives.30

Foreword
This document (EN 81-2:1998/A2:2004) has been prepared by Technical Committee CEN/TC 10 “Lifts, escalators
and moving walks”, the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 81-2:1998 shall be given the status of a national standard, either
by publication of an identical text or by endorsement, at
...