iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN ISO/TR 7016:2025

(Main)

Connection between the contributions of civil engineering works to sustainability and achievement of the Sustainable Development Goals (ISO/TR 7016:2025)

Connection between the contributions of civil engineering works to sustainability and achievement of the Sustainable Development Goals (ISO/TR 7016:2025)

This document shows the relationship between the indicators in EN 17472 and ISO 21928-2, used to assess the environmental, social, and economic performance of civil engineering works (CEW), and the Sustainable Development Goals (SDGs), which can serve as a tool to communicate the results of the assessment carried out with the methodology established in EN 17472 and ISO 21928-2.
This document does not provide any criteria or rules for performing any kind of assessment.
This document also provides information about how the SDGs are influenced by the performance of several CEW, based on the results of the assessment done according to either EN 17472 or ISO 21928-2, or both, and demonstrate their contributions to achieving the SDGs targets.
The links provided can also be applied to address efforts towards satisfying specific SDGs.

Zusammenhang zwischen den Beiträgen von Ingenieurbauten zur Nachhaltigkeit und dem Erreichen der SDGs (ISO/TR 7016:2025)

Lien entre les contributions des ouvrages de génie civil au développement durable et la réalisation des Objectifs de développement durable (ISO/TR 7016:2025)

Le présent document montre les relations entre les indicateurs de l'EN 17472 et de l'ISO 21928-2, utilisés pour évaluer la performance environnementale, sociale et économique des ouvrages de génie civil (CEW), et les Objectifs de développement durable (ODD), qui peuvent servir d'outil pour communiquer les résultats de l'évaluation réalisée avec la méthodologie établie dans l'EN 17472 et l'ISO 21928-2.
Le présent document ne fournit pas de critères ou de règles pour la réalisation d'une quelconque évaluation.
Le présent document fournit également des informations sur la manière dont les ODD sont influencés par la performance de plusieurs ouvrages de génie civil, sur la base des résultats de l'évaluation effectuée selon l'EN 17472 ou l'ISO 21928-2, ou les deux, et démontrent leurs contributions à la complétion des cibles des ODD.
Les liens fournis peuvent également être appliqués pour aborder les efforts réalisés pour satisfaire des ODD spécifiques.

Povezava med prispevki gradbenih del k trajnosti in doseganju ciljev trajnostnega razvoja (ISO/TR 7016:2025)

General Information

Status
Published
Publication Date
21-Oct-2025
ICS
13.020.20 - Environmental economics. Sustainability
93.010 - Civil engineering in general
Technical Committee
CEN/TC 350 - Sustainability of construction works
Drafting Committee
CEN/TC 350/WG 6 - Civil Engineering works
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Oct-2025
Completion Date
22-Oct-2025
Ref Project
SIST-TP CEN ISO/TR 7016:2025 - Connection between the contributions of civil engineering works to sustainability and achievement of the Sustainable Development Goals (ISO/TR 7016:2025)
TP CEN ISO/TR 7016:2025TP CEN ISO/TR 7016:2025
PreviousNext
Technical report
TP CEN ISO/TR 7016:2025
English language
76 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2025
Povezava med prispevki gradbenih del k trajnosti in doseganju ciljev trajnostnega
razvoja (ISO/TR 7016:2025)
Connection between the contributions of civil engineering works to sustainability and
achievement of the Sustainable Development Goals (ISO/TR 7016:2025)
Zusammenhang zwischen den Beiträgen von Ingenieurbauten zur Nachhaltigkeit und
dem Erreichen der SDGs (ISO/TR 7016:2025)
Lien entre les contributions des ouvrages de génie civil à la durabilité et à la réalisation
des ODD (ISO/TR 7016:2025)
Ta slovenski standard je istoveten z: CEN ISO/TR 7016:2025
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
93.010 Nizke gradnje na splošno Civil engineering in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TR 7016
TECHNICAL REPORT
RAPPORT TECHNIQUE
October 2025
TECHNISCHER REPORT
ICS 13.020.20; 93.010
English Version
Connection between the contributions of civil engineering
works to sustainability and achievement of the Sustainable
Development Goals (ISO/TR 7016:2025)
Lien entre les contributions des ouvrages de génie civil Zusammenhang zwischen den Beiträgen von
au développement durable et la réalisation des Ingenieurbauten zur Nachhaltigkeit und dem Erreichen
Objectifs de développement durable (ISO/TR der SDGs (ISO/TR 7016:2025)
7016:2025)
This Technical Report was approved by CEN on 10 October 2025. It has been drawn up by the Technical Committee CEN/TC 350.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 7016:2025 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (CEN ISO/TR 7016:2025) has been prepared by Technical Committee ISO/TC 59/SC 17
"Sustainability in buildings and civil engineering works" in collaboration with Technical Committee
CEN/TC 350 “Sustainability of construction works” the secretariat of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
Endorsement notice
The text of ISO/TR 7016:2025 has been approved by CEN as CEN ISO/TR 7016:2025 without any
modification.
Technical
Report
ISO/TR 7016
First edition
Connection between the
2025-10
contributions of civil engineering
works to sustainability and
achievement of the Sustainable
Development Goals
Lien entre les contributions des ouvrages de génie civil au
développement durable et la réalisation des Objectifs de
développement durable
Reference number
ISO/TR 7016:2025(en) © ISO 2025

ISO/TR 7016:2025(en)
© ISO 2025
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO/TR 7016:2025(en)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Methodology . 1
5 Relations between assessment indicators and SDGs . 2
5.1 Environmental indicators . .2
5.1.1 SDG 1. End of poverty .2
5.1.2 SDG 2. Zero hunger .3
5.1.3 SDG 3. Good health and well-being .4
5.1.4 SDG 4. Quality education .4
5.1.5 SDG 5. Gender equality .4
5.1.6 SDG 6. Clean water and sanitation .4
5.1.7 SDG 7. Affordable and clean energy .7
5.1.8 SDG 8. Decent work and economic growth .8
5.1.9 SDG 9. Industry, innovation and infrastructure .9
5.1.10 SDG 10. Reduce inequalities .10
5.1.11 SDG 11. Sustainable cities and communities .10
5.1.12 SDG 12. Responsible consumption and production .14
5.1.13 SDG 13. Climate action .17
5.1.14 SDG 14. Life below water .18
5.1.15 SDG 15. Life on land .19
5.1.16 SDG 16. Peace, justice and strong institutions . 22
5.1.17 SDG 17. Partnerships for the goals . 23
5.2 Social indicators . 23
5.2.1 SDG 1. End of poverty . 23
5.2.2 SDG 2. Zero hunger .27
5.2.3 SDG 3. Good health and well-being . 29
5.2.4 SDG 4. Quality education .32
5.2.5 SDG 5. Gender equality . 34
5.2.6 SDG 6. Clean water and sanitation . 35
5.2.7 SDG 7. Affordable and clean energy .37
5.2.8 SDG 8. Decent work and economic growth . 39
5.2.9 SDG 9. Industry, innovation and infrastructure . 40
5.2.10 SDG 10. Reduce inequalities .42
5.2.11 SDG 11. Sustainable cities and communities . 46
5.2.12 SDG 12. Responsible consumption and production . 49
5.2.13 SDG 13. Climate action . 50
5.2.14 SDG 14. Life below water .52
5.2.15 SDG 15. Life on land . 53
5.2.16 SDG 16. Peace, justice and strong institutions . 54
5.2.17 SDG 17. Partnerships for the goals . 56
5.3 Economic indicators .57
5.3.1 SDG 1. End of poverty .57
5.3.2 SDG 2. Zero hunger . 58
5.3.3 SDG 3. Good health and well-being . 58
5.3.4 SDG 4. Quality education . 58
5.3.5 SDG 5. Gender equality .59
5.3.6 SDG 6. Clean water and sanitation .59
5.3.7 SDG 7. Affordable and clean energy .59
5.3.8 SDG 8. Decent work and economic growth . 60
5.3.9 SDG 9. Industry, innovation and infrastructure . 60
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15273-2:2025(Main)
Railway applications - Gauges - Part 2: Rolling stock
SIST EN 15273-2:2025

This document is applicable to new vehicle designs, to modifications to existing vehicles and for checking existing vehicles to be used on another route or network.
This document contains:
-   the rules for rolling stock for all defined gauges;
-   the swept envelope calculation process used for defined dynamic gauges, absolute and comparative process;
-   the list of documents required to assess vehicle conformity to this standard.
This document is applicable to heavy rail vehicles using various track gauges. Other vehicles and networks are outside the scope of this document, but the rules may be applied to them with some adjustments and agreement of the share of responsibility between rolling stock and infrastructure.
This document is not applicable to the gauges “S” and “T” for track gauge 1 520 mm.

  • Standard
    199 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19085-13:2025(Main)
Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2025)
SIST EN ISO 19085-13:2025

This document specifies the safety requirements and measures for multi-blade rip sawing machines with manual loading or unloading or both, capable of continuous production use, hereinafter referred to also as “machines”, designed to cut solid wood and materials with similar physical characteristics to wood.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Transport, assembly, dismantling, disabling and scrapping phases are also taken into account.
This document does not deal with specific hazards related to the combination of single machines with any other machine as part of a line.
This document is not applicable to machines:
—     intended for use in potentially explosive atmosphere;
—     manufactured prior to its publication.

  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17573-2:2025(Main)
Electronic fee collection - System architecture for vehicle related tolling - Part 2: Vocabulary (ISO 17573-2:2025)
kSIST FprEN ISO 17573-2:2025

This document defines terms within the field of electronic fee collection (EFC).
This document defines:
—     terms that are used in standards related to electronic fee collection;
—     terms of a more general use that are used more specifically in standards related to electronic fee collection.
This document does not define terms related primarily to other fields that operate in conjunction with EFC, such as terms for intelligent transport systems (ITS), common payment systems, the financial sector, etc.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 24232:2025(Main)
Protective clothing - Protection against rain (ISO 24232:2024)
kSIST FprEN ISO 24232:2024

This document specifies requirements and test methods for the performance of materials and readymade garments for protection against the effects of precipitation (e.g. rain, snowflakes), fog and ground humidity. Garments for protection against other effects than precipitation (e.g. water splashes, waves) are excluded from this document.
The protective effects and requirements of footwear, gloves and separate headwear are excluded from the scope of this document.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15273-4:2025(Main)
Railway applications - Gauges - Part 4: Catalogue of defined gauges
SIST EN 15273-4:2025

The gauges included in this document have been developed for application on mainline railway networks using various track gauges. Other vehicles and networks are outside the scope of this document, but the rules may be applied to them with some adjustments and agreement of the share of responsibility between rolling stock and infrastructure.
This document is a catalogue of reference profiles and their associated rules for the defined gauging process. This document is intended to be used with EN 15273-1:2025, EN 15273-2:2025 and EN 15273-3:2025.
This document is not applicable to the gauges “S” and “T” for track gauge 1 520 mm.

  • Standard
    118 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15273-1:2025(Main)
Railway applications - Gauges - Part 1: General - Common rules for rolling stock and infrastructure
SIST EN 15273-1:2025

This document contains:
-   the definitions and symbols for all EN 15273 documents;
-   the general explanation of various elements and phenomena affecting heavy rail gauging;
-   the general explanation of various calculation methods and processes applicable to the heavy rail gauging that allow the dimensioning of the rolling stock and the infrastructure.
This document is applicable to heavy rail vehicles and networks using various track gauges. Other vehicles and networks are outside the scope of this document, but the rules may be applied to them with some adjustments and agreement of the share of responsibility between rolling stock and infrastructure.
This document is not applicable to the gauges “S” and “T” for track gauge 1 520 mm.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16128:2025(Main)
Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release
SIST EN 16128:2025

This document specifies the reference method for the testing of spectacle frames, ready-to-wear near-vision spectacles, sunglasses and spectacle frames used for eye and face protection for nickel release.
The reference method supports the demonstration of conformity with the limit value for nickel release of 0,5 µg·cm−2·week−1 set forth by European Regulation.
The reference method involves the procedural steps shown in Figure 1 and described in Clause 4.
This document applies to those parts of metal spectacle frames and those metal parts of combination spectacle frames that are intended to come into direct and prolonged contact with the skin of the wearer. This document also applies to those relevant metal parts of ready-to-wear near-vision spectacles, sunglasses and spectacle frames used for eye and face protection.
NOTE   The reference method for articles apart from spectacle frames, ready-to-wear near-vision spectacles, sunglasses and spectacle frames used for eye and face protection is specified in EN 1811.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17508:2025(Main)
Packaging - Transport packaging for dangerous goods - Compatibility testing of polyethylene, fluorinated polyethylene and co-extruded plastic (ISO 17508:2025)
kSIST FprEN ISO 17508:2025

This document specifies test methods for the determination of the chemical compatibility of packaging/ IBC made from polyethylene (PE), fluorinated polyethylene and co-extruded plastics. It covers the determination of adequate plastics compatibility against the following processes of deterioration:
—     softening due to absorption (swelling);
—     stress cracking;
—     combinations thereof.
This document is applicable to:
—     drums and jerricans made from plastics;
—     composite packaging (plastics) with inner receptacle made from plastics;
—     rigid plastics IBCs (types 31H1 and 31H2);
—     composite IBCs with rigid plastics inner receptacles (type 31HZ1);
used for the transport of liquid dangerous goods.
Proof of adequate plastics compatibility obtained using the test procedures specified in this document is only applicable to the above packaging and IBC types of the following materials and material specifications:
—     packaging and IBCs made from PE;
—     packaging and IBCs made from PE, whose internal surfaces are fluorinated; and
—     packaging and IBCs which are coextrusion blow moulded and have walls with the following multilayer structure (from inside to outside):
—    polyamide (PA), bonding agents, PE, or
—    ethylene vinyl alcohol (EVOH), bonding agents, PE.
Note              Packaging and IBCs made from PE and packaging and IBCs made from PE with fluorinated internal surfaces, deteriorate additionally due to molecular degradation reactions with the corresponding packaged substances. For this, the chemical compatibility can also be verified by the type tests described in ISO 13274:2013, Annex B, B.2.3, using the standard liquid nitric acid (55 %) or appropriate original packaged substances. Packaging made from Coex PE/PA and Coex PE/EVOH is not resistant to polar acid molecularly degrading substances such as nitric acid, with the result that a corresponding method is not considered for this process of deterioration in this document.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/IEC 27706:2025(Main)
Information security, cybersecurity and privacy protection - Requirements for bodies providing audit and certification of privacy information management systems (ISO/IEC 27706:2025)
kSIST FprEN ISO/IEC 27706:2025

This document specifies requirements and provides guidance for bodies providing audit and certification of a privacy information management system (PIMS) according to ISO/IEC 27701, in addition to the requirements contained within ISO/IEC 17021-1.
The requirements contained in this document are demonstrated in terms of competence and reliability by bodies providing PIMS certification. The guidance contained in this document provides additional interpretation of these requirements for bodies providing PIMS certification.
NOTE       This document can be used as a criteria document for accreditation, peer assessment or other audit processes.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day