EN 934-3:2009/FprA1

Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling

This European Standard defines and specifies the requirements and conformity criteria for admixtures for use in cement based masonry mortar.
It covers two types of admixtures, long term retarding and air entraining/plasticising which are used in ready-mixed and site made masonry mortars.
Provisions for the use of admixtures for masonry mortar are not part of this European Standard but are covered by EN 998-1 and EN 998-2.

Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 3: Zusatzmittel für Mauermörtel - Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung

Adjuvants pour béton, mortier et coulis - Partie 3: Adjuvants pour mortier de montage - Définitions, exigences, conformité, marquage et étiquetage

Kemijski dodatki za beton, malto in injekcijsko maso - 3. del: Kemijski dodatki za malto za zidanje - Definicije, zahteve, skladnost, označevanje in etiketiranje

General Information

• Status: Not Published
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 3 - Admixtures for concrete
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 24-Apr-2012
• Due Date: 02-Sep-2012
• Completion Date: 24-Apr-2012
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 934-3:2009/kFprA1:2012 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling

Relations

• Merged Into: EN 934-3:2009+A1:2012 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
• Effective Date: 09-May-2012
• Amends: EN 934-3:2009 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
• Effective Date: 18-Dec-2010

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVRGHO.HPLMVNLGRGDWNL]D
PDOWR]D]LGDQMH'HILQLFLMH]DKWHYHVNODGQRVWR]QDþHYDQMHLQHWLNHWLUDQMH
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar -
Definitions, requirements, conformity and marking and labelling
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 3: Zusatzmittel für Mauermörtel -
Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung
Adjuvants pour béton, mortier et coulis - Partie 3: Adjuvants pour mortier de montage -
Définitions, exigences, conformité, marquage et étiquetage
Ta slovenski standard je istoveten z: EN 934-3:2009/FprA1
ICS:
01.040.91 Gradbeni materiali in gradnja Construction materials and
(Slovarji) building (Vocabularies)
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 934-3:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
November 2011
ICS 91.100.30
English Version
Admixtures for concrete, mortar and grout - Part 3: Admixtures
for masonry mortar - Definitions, requirements, conformity and
marking and labelling
Adjuvants pour béton, mortier et coulis - Partie 3: Adjuvants Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 3:
pour mortier de montage - Définitions, exigences,
Zusatzmittel für Mauermörtel - Definitionen, Anforderungen,
conformité, marquage et étiquetage Konformität, Kennzeichnung und Beschriftung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 104.
This draft amendment A1, if approved, will modify the European Standard EN 934-3:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. E
...