EN 934-3:2009+A1:2012

Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling

This European Standard defines and specifies the requirements and conformity criteria for admixtures for use in cement based masonry mortar.
It covers two types of admixtures, long term retarding and air entraining/plasticising which are used in ready-mixed and site made masonry mortars.
Provisions for the use of admixtures for masonry mortar are not part of this European Standard but are covered by EN 998-1 and EN 998-2.

Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 3: Zusatzmittel für Mauermörtel - Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung

Diese Europäische Norm definiert und legt Anforderungen und Konformitätskriterien für Zusatzmittel für zementgebundenen Mauermörtel fest.
Sie gilt für zwei Arten von Zusatzmitteln, Erstarrungsverzögerer für langzeitverzögerte Mauermörtel und Luftporenbildner/Betonverflüssiger, die sowohl für Mörtel, der fertig gemischt auf die Baustelle geliefert wird, als auch für Mörtel, der auf der Baustelle hergestellt wird, verwendet werden.
Festlegungen zur praktischen Anwendung von Zusatzmitteln für Mauermörtel sind nicht Bestandteil dieser Europäischen Norm, sondern werden durch EN 998-1 und EN 998-2 erfasst.

Adjuvants pour béton, mortier et coulis - Partie 3: Adjuvants pour mortier de montage - Définitions, exigences, conformité, marquage et étiquetage

La présente Norme européenne définit et précise les exigences et les critères de conformité pour les adjuvants utilisés dans le mortier à maçonner à base de ciments.
Il s'applique à deux types d'adjuvants, les adjuvants fortement retardateurs de prise et les adjuvants entraîneurs d'air / plastifiants utilisés dans le mortier prêt à l'emploi ainsi que dans le mortier fabriqué sur chantier.
Les dispositions relatives à l’utilisation d'adjuvants de mortier à maçonner ne font pas partie de la présente norme européenne, mais de l’EN 998-1 et de l'EN 998-2.

Kemijski dodatki za beton, malto in injekcijsko maso - 3. del: Kemijski dodatki za malto za zidanje - Definicije, zahteve, skladnost, označevanje in etiketiranje

Ta evropski standard določa ter opredeljuje zahteve in merila za skladnost za dodatke pri uporabi v zidarski malti, ki temelji na cementu. Pokriva dve vrsti dodatkov, dolgoobstojne in aerirane dodatke/plastifikatorje, ki se uporabljajo v svežih mešanicah in zidarski malti, pripravljeni na mestu samem. Določbe za uporabo dodatkov za zidarsko malto niso del tega evropskega standarda; vključene so v standarda EN 998-1 in EN 998-2.

General Information

• Status: Published
• Publication Date: 03-Jul-2012
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 3 - Admixtures for concrete
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 18-Jun-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 934-3:2009+A1:2012 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling

Relations

• Merged From: EN 934-3:2009 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
• Effective Date: 18-Jan-2023
• Merged From: EN 934-3:2009/FprA1 - Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
• Effective Date: 09-May-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 3: Zusatzmittel für Mauermörtel - Definitionen, Anforderungen, Konformität, Kennzeichnung und BeschriftungAdjuvants pour béton, mortier et coulis - Partie 3: Adjuvants pour mortier de montage - Définitions, exigences, conformité, marquage et étiquetageAdmixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling91.100.30Beton in betonski izdelkiConcrete and concrete products91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 934-3:2009+A1:2012SIST EN 934-3:2009+A1:2012en,fr,de01-december-2012SIST EN 934-3:2009+A1:2012SLOVENSKI
STANDARDSIST EN 934-3:20091DGRPHãþD



SIST EN 934-3:2009+A1:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 934-3:2009+A1
July 2012 ICS 91.100.10; 91.100.30 Supersedes EN 934-3:2009English Version
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling
Adjuvants pour béton, mortier et coulis - Partie 3: Adjuvants pour mortier de montage - Définitions, exigences, conformité, marquage et étiquetage
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Teil 3: Zusatzmittel für Mauermörtel - Definitionen, Anforderungen, Konformität, Kennzeichnung und Beschriftung This European Standard was approved by CEN on 16 July 2009 and includes Amendment 1 approved by CEN on 25 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 934-3:2009+A1:2012: ESIST EN 934-3:2009+A1:2012



EN 934-3:2009+A1:2012 (E) 2 Contents page Foreword . 31 Scope . 42 Normative references . 43 Terms and definitions . 44 Requirements . 55 Sampling . 66 Conformity control. 77 Evaluation of conformity . 78 Marking and labelling . 88.1 General . 88.2 Designation of admixtures . 88.3 Additional information .
...